• Energy Research
• Restricted close
• Embargo close
• ES close
• US close
• GB close
• PL close

In this paper some preliminary experimental results on a Zebra battery based propulsion system for urban bus applications are presented. The tests were carried out using a laboratory 1:1 scale test bench, composed by a 65 kW electric drive, specifically designed for urban bus applications, supplied by two 20 kWh Zebra batteries connected in parallel. The electric power train was tested on a laboratory bench, connected through a fixed ratio gear box to a 100 kW regenerative electric brake provided with speed and torque controls, in order to evaluate the propulsion system performance in steady state operative conditions. The obtained preliminary experimental results were utilized to implement a Matlab-Simulink model of urban bus, which might be powered by the same electric propulsion system studied. Thanks to this model it was possible to evaluate the dynamic behavior of the urban bus, working on standard driving cycles, taking into account the resistant forces represented by proper vehicle/road/aerodynamic parameters. An evaluation of the expected real vehicle driving range was also estimated in different road conditions.

From the British debate on the depletion of coal in 1865 to the First World Power Conference held in London in 1924, scientists, engineers, industrialists, and politicians produced new interpretations of the past, present, and future in terms of the mobilisation of energy resources. This thesis identifies an emerging ‘energy developmentalism’, which called for maximising energy use to maintain or improve a nation’s place in international competition. Energy developmentalism was not a marginal worldview confined to ‘energeticists’, but a coherent set of claims, measurements, and arguments that informed energy governance on an international scale. Rather than focusing on a single resource, energy developmentalism applied a unified schema to all energy sources, including those like solar and tidal energy that were still mostly theoretical. Drawing on sources from across Europe, while staying grounded in political changes in Britain and France, makes it possible to understand how a general formula for transforming raw materials with maximum efficiency was applied differently depending on specific political contexts. This period saw the articulation of problems like the depletion of resources, the difference between renewable and nonrenewable energy, the intermittency of renewables, the overreliance on a single source of energy, and the centrality of energy to modern economies – problems that are often associated with later periods. Scientific measurements of efficiency, horsepower, and kilowatts became operators in political debates centred on questions of national standing and progress. Even as oil became increasingly important in the world economy, the delegates at the First World Power Conference transformed a vision of a renewable energy future into one of a general expansion of energy consumption as the basis of progress. In so doing, they downplayed the continued importance of fossil fuels and equated ‘conservation’ with the fullest possible use of all energy sources, renewable or not.

Capítulos en libros This paper studies the damping of electromechanical oscillations making use of both the ratio and phase modulation capabilities of static synchronous series sources. The design of the static synchronous series source damping controllers is addressed using eigenvalue sensitivities. The eigenvalue sensitivity with respect to a parameter of a feedback controller estimates the eigenvalue shift when such parameter is changed. The controller design comprises two steps: the design of the phase compensation network and the calculation of the controller gain. A combined method is developed to take advantage of both ratio and phase modulating capabilities of static synchronous series sources. Once the phase controller has been designed and incorporated into the system model, the ratio controller has to be designed taking into account the effect of the phase controller due to the direct relationship between the input of the ratio controller and the phase itself. The suggested approach is illustrated in a simple test system. info:eu-repo/semantics/publishedVersion

ON 16 NOVEMBER 2000, the final report of the World Commission on Dams (WCD) was launched in London, in the presence of South Africa’s former president Nelson Mandela. This represented a remarkable milestone in the history of dam policy and politics. During its two-year existence, WCD had conducted the most extensive review of research and evidence regarding the planning, impacts, and management of large dams. It had engaged with numerous stakeholders around the globe. It also made comprehensive recommendations about how to improve dam planning and management.

Hot water heat stores with stratification are a common technology used in solar energy systems and reuse of waste heat. Adding a PCM module at the top of the water tank would give the system higher storage density, and compensate heat loss in the top layer. The work presented here includes experimental results and numerical simulation of the system using an explicit finite-difference method. Experiments and simulations were carried out using different cylindrical PCM modules. With only 1/16 of the volume of the store being PCM, 3/16 of water at the top of the store was held warm for 50% to 200% longer and the average energy density was increased by 20% to 45%. Furthermore, these 3/16 of water were reheated by the heat from the module after being cooled down in only 20 min.

Using 40-year experiment data from a mono-modal rainfall area of northern Togo, we analyzed soil fertility dynamics when 2 and 3-year fallows were alternated with 3-year rotation of groundnut, cotton and sorghum. The control treatment consisted to continuous cultivate the soil in a rotation of groundnut/cotton/sorghum without fallow periods. For each rotation, two fertilisation rates were applied: no fertilisation and mineral fertiliser application during the cropping and/or the fallow periods. Yields of unfertilised crops, which averaged 1 t ha-1 during the first years of cultivation, were often nil in the long-term. In the long-term, yields of fertilised cotton and sorghum decreased by 32 and 50 %, respectively compared to the average of 2.4 and 1.6 t ha-1 obtained during the first decade of cultivation. The long-term decline in crop productivity was mitigated when fallow periods were alternated with cropping periods, and consequently there was partial compensation in terms of production for the unproductive fallowed plots. Long-term yields of fertilised cotton and sorghum in the periodically fallowed plots were 40 and 50 % higher than those in continuously cropped plots, respectively; they were 90 and 60 % higher than those in continuously cropped plots without fertilisation. Like for crop productivity, soil C, N and exchangeable Ca and Mg decreased less in periodically fallowed plots than in continuously cropped plots. The limited soil C decline when fallows were alternated with crops appears to be the consequence of no-tillage period rather than the effect of the highest C inputs to the soil.

Responses to recent climatic changes in the sediment of subarctic Lake Saanajärvi in northwestern Finnish Lapland are studied by comparison of various biological and sedimentological proxies with the 200-year long climate record, specifically reconstructed for the site using a data-set of European-wide meteorological data. The multi-proxy evidence of simultaneously changing diatom, Cladocera, and chrysophyte assemblages along with the increased rates of organic matter accumulation and pigment concentrations suggest that the lake has undergone a distinct typological change starting from the turn of the 20th century. This change, indicating an increase in lake productivity, parallels a pronounced rise in the meteorologically reconstructed mean annual and summer temperatures in the region between ca. 1850 and 1930's. We postulate that, during the Little Ice Age, the lake was not, or was only weakly, thermally stratified during summer, whereas the subsequent increase in air and hence epilimnetic water temperatures resulted in the development of the present summer stratification. The increased thermal stability of the lake created more suitable conditions for the growth of phyto- and zooplankton and changed the overall primary production from benthos to plankton. Mineral magnetic and carbonaceous particle records suggest long-distance pollution, particularly since the 1920's, yet the observed changes in lake biota and productivity can hardly be explained by this very minor background pollution; the 20th century species configurations are typical of neutral waters and do not indicate any response to pollution.

Capítulos en libros The importance of the natural gas sector in the electric power industry has increased substantially over the last decades, reaching 21% generation capacity in Europe in 2016. Generation companies that own gas fired units (GFUs), such us combined cycle gas turbines, have to take into account not only the fuel and the operation and maintenance costs, but also the costs related to the third-party access (TPA) tariffs to the gas network as any other gas consumer. This paper highlights the importance of modeling these TPA tariffs in a proper manner as they represent a significant share of the total operation cost of GFU. In addition, the fact that TPA final costs depend on the daily gas consumption for the whole month, makes traditional short-term unit-commitment (UC) models unable to capture the impact of the new complicating constraints. This paper presents the mathematical formulation of a UC model that models the TPA tariffs to the gas network in a more realistic manner where a joint assessment is formulated for all the units that withdraw gas from the same node of the gas network. The paper includes an example case that illustrates the impact on the optimal hourly scheduling of such detailed modeling, and it compares the results with the standard formulation based on individual cost functions of each thermal unit. info:eu-repo/semantics/publishedVersion

The most widely used process for hydrogen production is steam methane reforming. It can be carried out using a membrane reactor in which simultaneous hydrogen production and purification occur. Mathematical modeling of these reactors plays a key role in the selection of the design and operating parameters that yield high performance for the reactor. This review study discusses, synthesizes, and compares different mathematical modeling studies on the packed bed membrane reactors for hydrogen production from methane found in the literature. Different approaches used in these modeling studies for the hydrogen permeation steps, reaction kinetic expressions, phases involved (pseudo-homogeneous and heterogeneous), and spatial dimensions (one, two, and three dimensional) are given.