• Energy Research
• Restricted close
• Open Source close
• Embargo close
• 7. Clean energy close
• 14. Life underwater close
• US close
• PT close

This study highlights how Chinese economic development detrimentally impacted water quality in recent decades and how this has been improved by enormous investment in environmental remediation funded by the Chinese government. To our knowledge, this study is the first to describe the variability of surface water quality in inland waters in China, the affecting drivers behind the changes, and how the government-financed conservation actions have impacted water quality. Water quality was found to be poorest in the North and the Northeast China Plain where there is greater coverage of developed land (cities + cropland), a higher gross domestic product (GDP), and higher population density. There are significant positive relationships between the concentration of the annual mean chemical oxygen demand (COD) and the percentage of developed land use (cities + cropland), GDP, and population density in the individual watersheds (p < 0.001). During the past decade, following Chinese government-financed investments in environmental restoration and reforestation, the water quality of Chinese inland waters has improved markedly, which is particularly evident from the significant and exponentially decreasing GDP-normalized COD and ammonium (NH4+-N) concentrations. It is evident that the increasing GDP in China over the past decade did not occur at the continued expense of its inland water ecosystems. This offers hope for the future, also for other industrializing countries, that with appropriate environmental investments a high GDP can be reached and maintained, while simultaneously preserving inland aquatic ecosystems, particularly through management of sewage discharge.

This work presents a crude bioethanol fueled integrated power system for backup and off-grid applications. The system is based on ethanol steam reformation to hydrogen that is used in polymer electrolyte fuel cells to produce electricity. We introduce the system design and overall system specifications, and report the experimental process of defining specifications for the produced hydrogen quality, a key variable affecting the final system cost, efficiency and durability. Results from development of individual subsystems are also presented together with discussion on the complete system integration.

(Abstract) This paper proposes a new power line communication (PLC) architecture for monitoring and remote control of Distributed Generators (DG) and Energy Storage Systems (ESS) connected to low voltage distribution networks. The final aim is to improve the performance of the PLC link in terms of robustness and efficiency in devices addressing. The proposed solution is based on a concentrator, to be installed in secondary substation, and a new PLC bridge, to be linked both to inverters and interface protection systems of DGs or ESSs. In this way, a communication link is obtained between distribution system operator (DSO) and DG or ESS owners. The proposed system is able to provide advanced functions for the remote control of DGs and ESSs inverters, not only in terms of remote disconnection but also in terms of adjusting the inverter operating modes.

This chapter discusses the present scenario and market trend of regenerated cellulosic fibers, and the properties of principal fibers existing in the market as well as some new fibers recently developed and yet to be explored. Production technologies of these fibers are discussed and their potential applications are presented. Various sustainability issues related to the production of regenerated cellulosic fibers are dealt within this chapter. The last section discusses the results of research studies conducted to assess the environmental impacts and sustainability aspects of regenerated cellulose fibers. Serie: Textile science and clothing technology, ISSN 2197-9863

<div class="section abstract"><div class="htmlview paragraph">The introduction of new light-duty vehicle emission limits to comply under real driving conditions (RDE) is pushing the diesel engine manufacturers to identify and improve the technologies and strategies for further emission reduction. The latest technology advancements on the after-treatment systems have permitted to achieve very low emission conformity factors over the RDE, and therefore, the biggest challenge of the diesel engine development is maintaining its competitiveness in the trade-off “CO₂-system cost” in comparison to other propulsion systems. In this regard, diesel engines can continue to play an important role, in the short-medium term, to enable cost-effective compliance of CO₂-fleet emission targets, either in conventional or hybrid propulsion systems configuration. This is especially true for large-size cars, SUVs and light commercial vehicles.</div><div class="htmlview paragraph">In this framework, a comprehensive approach covering the whole powertrain is of primary importance in order to simultaneously meet the performance, efficiency, noise and emission targets, and therefore, further development of the combustion system design and injection system represent important levers for additional improvements. For this purpose, a dedicated 0.5 dm³ single-cylinder engine has been developed and equipped with, a state-of-the-art Euro 6 combustion system, and an advanced common rail fuel injection system (FIS) offering higher flexibility in terms of injection strategy and higher quantity accuracy. Three injector nozzles with different hydraulic flow rates (HF) have been selected and employed for the overall combustion process optimization.</div><div class="htmlview paragraph">The optimization has been performed by means of an extensive DoE-based test campaign in which the engine and FIS operating parameters have been parametrized with the aim to carry out a proper combination in terms of HF and injection strategy. The results at partial load conditions evidence significant advantages in applying an advanced injection pattern, while the HF reduction can significantly improve the smoke emission and combustion noise without fuel consumption penalties. Therefore, a proper combination and optimization of the HF and injection strategy can provide low noise and engine-out smoke while maintaining the rated power performance targets.</div></div>

A Life Cycle Assessment (LCA) with focus on carbon footprint, followed by Life Cycle Costing (LCC) of municipal solid waste (MSW) management were conducted in a residential area of a medium-sized European city of 80,000 inhabitants. The initial results showed high environmental impacts and lack of economic sustainability, due to the high amounts of waste landfilled, the low extent of separate collection, low performance of mechanical-biological treatment as well as absence from alternatives to landfilling of non-recyclable materials. Taking this result as a baseline scenario, three improvement.s were tested with the aim of turning the carbon footprint of the local MSW management system into a neutral value: (i) increased separate collection of recyclables, (ii) enhanced biogas production and (iii) refuse-derived fuel (RDF) production. Successively adding the improvements, three alternative improved scenarios were defined, until reaching a negative carbon footprint, meaning that an optimised system would avoid GHG emissions. The proposed changes were sufficient to achieve carbon neutrality, as well as reduce overall environmental impacts, but were not enough for achieving economic sustainability due to the great influence of collection costs, especially for separate collection. It was concluded that by using an adequate combination of several treatment options and increasing the separate collection of recyclable materials it is possible to turn MSW management into a carbon neutral activity as well as improve its economic balance.

Abstract One of the critical areas in the outer shell of household refrigerators is the compressor compartment, which has relatively high temperatures, due to the heat generated while the compressor is running. This implies a larger heat transfer to the interior air volume and, consequently, more energy consumption. One way to decrease this temperature is to ventilate the base of the refrigerator with a small fan. In the research carried out, a decrease of 11 °C in the temperature of the surfaces close to the compressor was recorded, when the fan was running. The implications of this effect can be seen at two levels: changes in the temperature distribution at the bottom of the refrigerator envelope and the resulting dynamic effects, and a decrease in energy consumption of the entire system. Consequently, there are lower CO 2 emissions to the environment, making household refrigerators more efficient and sustainable.

Abstract Thermal energy storage (TES) will improve the efficiency and output of solar power plants. TES based on thermochemical cycles is an interesting option as thermochemical cycles can provide high energy storage densities and allow longer heat storage time. The use of multivalent solid oxide reduction–oxidation (REDOX) reactions for thermochemical heat storage is a promising option. Several concepts are feasible for coupling solar energy to the redox reaction. Among those a directly irradiated rotary kiln is one of the most interesting because it is able to provide high mass flow rates and high amounts of active material. A solar-heated rotary kiln was set-up and operated in the solar furnace of DLR for thermal reduction and oxidation of cobalt oxide. The redox material was fed into the reactor batch wise and reduced on-sun at temperatures of about 900 °C and re-oxidized off-sun in the same rotary kiln. Both steps were carried out in an air atmosphere. Thirty cycles were performed with one batch showing no evident degradation of the material. The results confirm that the rotary kiln is a feasible reactor set-up for the solar reduction of metal oxides and, hence, for thermochemical energy storage.