• Energy Research
• 12. Responsible consumption close
• RU close
• EC close
• Energies close

The beginning of the 21st century for the fuel and energy complexes of most countries is characterized as a period of active restructuring and a fundamental shift in developmental priorities. The basis of these changes is technological development. Industry 4.0 technologies have particular importance in achieving maximum optimization of production processes. In the same way, they are applicable in establishing effective interaction between the energy sector and other sectors of the economy. The authors outline an approach to assessing the country’s fuel and energy balance state through the selected properties: sustainability, accessibility, efficiency, adaptability and reliability. Hence, a model of the fuel and energy complex was created on the example of the Russian Federation, considering the country’s territorial and functional division. The methodology is based on scenario modeling of the influence level of external challenges in conjunction with the accompanying technological development. The mathematical model allowed forecasting changes in the properties of the energy system. The scientific significance of the work lies in the application of a consistent hybrid modeling approach to forecast the state of the fuel and energy balance. The results of the study are useful in compiling scenarios for the regional and entire development of the fuel and energy complex. Further model improvements should include an expansion of the number of counted industries and their relations.

This article describes the results of a study of Ecuador’s energy status, using the system dynamics methodology to model supply, demand and CO2 emissions scenarios for the year 2030. Primary energy production increased in the different projected scenarios, with oil as the most important source of energy. The increase observed in final energy consumption was mainly associated with the transport and industry sectors. A reduction in energy intensity was projected for the different scenarios, which could be associated with the projected economic growth. The results obtained were used to build a proposal for energy policies aimed at mitigating emissions. The proposed changes to the national energy matrix could be the factors that will contribute most to the achievement of carbon emission reductions projected by the different scenarios; changes in the energy matrix are mainly associated with the development of projects to replace fossil fuels with renewable energies, mainly hydropower.

Energy performance contracts are a very promising area for attracting private investment in the renewable energy sector. The concept of energy performance contracting is a well-established mechanism aimed at increasing the energy efficiency of a facility and reducing annual maintenance costs. This paper presents a hierarchical model of a decentralized energy system with renewable energy sources and a battery energy storage system under an energy service agreement. This model reflects the interaction between the client and the performance company. The model includes the main parameters characterizing the energy service contract, such as net present value, contract duration and levelized cost of energy. As an example, a real decentralized power system is considered, which currently only uses diesel generation. In the case of building a photovoltaic system, the optimal equipment composition consists of a 100 kW solar station and storage batteries with a capacity of 240 kW·h. The optimal contract term is 5 years, and diesel fuel savings are 69%.

Biomass can be considered an alternative to coal in the production of heat and electricity. Many types of biomass are waste from agriculture and the food industry. This waste is cheap, readily available, and replenished annually. However, most agricultural and food industry wastes (sugar cane pulp, olive and sunflower oil production wastes, straw, etc.) have ash with a low melting point. This leads to a rapid growth of ash deposits on the heating surfaces of boilers; as a result, the actual efficiency of boilers in which waste from agriculture and the food industry is burned is 45–50%. Known biomass pre-treatment technologies that allow for the fuel characteristics of biowaste. For example, leaching of biowaste in water at a temperature of 80–240 °C makes it possible to drastically reduce the content of alkali metal compounds in the ash, the presence of which reduces the melting point of the ash. However, this biomass pre-treatment technology is complex and requires additional costs for drying the treated biomass. We proposed to use torrefaction for pre-treatment of biomass, which makes it possible to increase the heat of combustion of biomass, increase the hydrophobicity of biomass, and reduce the cost of grinding it. However, we are not aware of studies that have studied the effect of torrefaction on the chemical composition of ash from the point of view of solving the problem of preventing the formation of agglomerates and reducing the growth rate of ash deposits on the convective heating surfaces of boilers. In this paper, the characteristics of sunflower husk subjected to torrefaction in an environment of superheated steam at a temperature of 300 °C and in an environment of gaseous products at a temperature of 250 °C are studied. All experiments were conducted using fluidized bed technology. The resulting biochar has a calorific value of 14.8–23% higher than the initial husk. To assess the behavior of sunflower husk ash, predictive coefficients were calculated. Torrefaction of sunflower husks does not exclude the possibility of slagging of the furnace but reduces the likelihood of slagging by 2.31–7.27 times. According to calculations, the torrefaction of sunflower husks reduces the likelihood of ash deposits on the convective heating surfaces of the boiler by 2.1–12.2 times. According to its fuel characteristics, the husk, after torrefaction in an environment of superheated steam, approaches wood waste, i.e., can be burned separately without additives or mixtures with other fuels with refractory ash.

According to the forecasts made by IEA, BP, and Total in early 2021, the demand for hydrocarbons will continue for decades, and their share in the global energy balance will remain significant. Russia, as a key player in the energy market, is interested in maintaining and increasing hydrocarbon production, so further exploitation of the Arctic energy resources is an urgent issue. A large number of onshore oil and gas projects have been successfully implemented in the Arctic since the 1930s, while recently, special attention has been paid to the offshore energy resources and implementation of natural gas liquefaction projects. However, the implementation of oil and gas projects in the Arctic is characterized by a negative impact on the environment, which leads to a violation of the ecological balance in the Arctic, and affects the stability of its ecosystem, which is one of the most vulnerable ecosystems on the planet. The main goal of the present study is to understand how the implementation of oil and gas projects in the Arctic affects the ecosystem, to assess the significance of this process, and to find out what the state and business could do to minimize it. In the article, the authors analyze energy trends, provide brief information about important oil and gas projects being implemented in the Arctic region of Russia, and investigate the challenges of the oil and gas projects’ development and its negative impacts on the Arctic environment. The main contributions of this paper are the identification of all possible environmental risks and processes accompanying oil and gas production, and its qualitative analysis and recommendations for the state and business to reduce the negative impact of oil and gas projects on the Arctic ecosystem. The research methodology includes desk studies, risk management tools (such as risk analysis, registers, and maps), brainstorming, the expert method, systematization, comparative analysis, generalization, and grouping.

High dependency on fossil fuels, low energy efficiency, poor diversification of energy sources, and a low rate of access to electricity are challenges that need to be solved in many developing countries to make their energy systems more sustainable. Cogeneration has been identified as a key strategy for increasing energy generation capacity, reducing greenhouse gas (GHG) emissions, and improving energy efficiency in industry, one of the most energy-demanding sectors worldwide. However, more studies are necessary to define approaches for implementing cogeneration, particularly in countries with tropical climates (such as Ecuador). In Ecuador, the National Plan of Energy Efficiency includes cogeneration as one of the four routes for making energy use more sustainable in the industrial sector. The objective of this paper is two-fold: (1) to identify the potential of cogeneration in the Ecuadorian industry, and (2) to show the positive impacts of cogeneration on power generation capacity, GHG emissions reduction, energy efficiency, and the economy of the country. The study uses methodologies from works in specific types of industrial processes and puts them together to evaluate the potential and analyze the impacts of cogeneration at national level. The potential of cogeneration in Ecuador is ~600 MWel, which is 12% of Ecuador’s electricity generation capacity. This potential could save ~18.6 × 106 L/month of oil-derived fuels, avoiding up to 576,800 tCO2/year, and creating around 2600 direct jobs. Cogeneration could increase energy efficiency in the Ecuadorian industry by up to 40%.

Low-temperature solar thermal energy is a viable and mature alternative to reduce the use of fossil fuels for domestic hot water heating. The impact of the inclusion of this technology in the energy matrix in the Andean city of Cuenca, Ecuador, is analyzed. In Ecuador, liquefied petroleum gas (LPG) is currently used to heat water due to the high state subsidy, with a cost of 0, 11 USD for an LPG kg compared to the international price of 1.18 USD a Kg of LPG in 2021. Sustainability indicators show that the urban energy matrix would be minimally affected by a high penetration of solar thermal systems. The indicators that are positively affected are related to energy self-sufficiency, emissions, and employment at the expense of an increase in the cost of energy. Moreover, the analysis of the impact on consumption exclusively in the residential sector shows that liquefied petroleum gas consumption would drop from 73 to 64%, mainly because the liquefied gas is used in cooking. However, the change in technology is limited by the subsidized cost of liquefied petroleum gas, which makes the adoption of this technology difficult in the current state