• Energy Research
• other engineering and technologies close
• 11. Sustainability close
• 12. Responsible consumption close
• RU close
• SA close

Torrefaction is considered as a method for producing biofuels with improved characteristics compared to those of the “raw” biomass (higher calorific value, moisture resistance, better grindability). The torrefaction process is an endothermic process that is usually carried out in a gaseous atmosphere in the absence of oxygen. To reduce the required heat input, it is proposed to employ the oxidative torrefaction and conduct the process in a fluidized bed agitated with flue gases containing less than 6% oxygen. Preliminary studies of the oxidative torrefaction of sunflower husks, including thermogravimetric analysis of the treated material, have shown that the heat treatment time for the biomass should be at least 5 min. A fluidized bed is a reactor with ideal mixing of the treated material where uniform treatment of raw material particles cannot generally be attained. To overcome this disadvantage of the fluidization technique and achieve the required residence time for biomass in a fluidized bed during a continuous torrefaction process, it was proposed to equip a torrefaction reactor with a series of vertical baffles spaced at 50 mm. These baffles induce a loop-like flow of the processed biomass from the inlet to the outlet of the reactor. To investigate the residence time for husk particles in the reactor, a tracer, which was colored to husk particles' color with a water-soluble dye which did not change the weight and size of the particles, was injected into the bed of uncolored particles. Tracer samples were taken every 30 s at the outlet of the reactor and were analyzed using a special procedure to determine the fraction of colored particles in each sample. This enabled us to gauge the time during which the colored particles injected into the fluidized bed reached the point of their discharge from the bed. Studies performed in a “cold” model of the reactor showed that a series of vertical baffles in the bed can provide the required residence time for biomass in a reactor including commercial reactors. Plates can provide the necessary biomass residence time in the reactor.

As smart cities become a global topic, interest in smart mobility, the core of smart cities, is also growing. The technology that comes closest to general users is “autonomous driving”. In particular, the successful market entry and establishment of some private companies proved that “autonomous driving” is not technology of the future but imminent reality. However, safety in autonomous vehicles that rely on sensors instead of the driver’s five senses has been the focus of attention from the beginning and continues to be so. In this study, we attempted to counter this interest. Based on the actual data of thirty traffic accidents, assuming the AEBS (Autonomous Emergency Braking System) was installed to assist the driver in safe driving, it was reinterpreted through simulation to see what changes occurred in the accident. In the computer program, PC-Crash, the results were first analyzed through simulation using Euro NCAP (New Car Assessment Program)’s AEBS test standards. Subsequently, the other variables in the AEBS were controlled and the accident was reinterpreted by changing only the angle of the radar detection sensor. As a result, it was confirmed that a total of 27 accidents out of thirty accidents could have been prevented with the AEBS. In addition, it proved that the crash avoidance rate of vehicles gradually increased as the radar angle increased.

Introduction. The article presents an analysis of researches on the operation of public transport vehicles with an electric drive. Electric buses have been tested in megacities, and despite the advantages, problems were identi- fied both in the selection of the charging type, technological features and with the availability and operation of the charging infrastructure. The operation process is associated with a number of technical restrictions, which in prac- tice make it difficult to select routes for the electric bus operation. The aim of the study is to develop an algorithm for selecting a rational regular urban route for the electric bus operation and to test it on the example of the route network of Tyumen.Materials and methods. A structural diagram of the factors influencing the selection of the route for the electric bus operation has been formed. As a result of processing expert assessments, the most significant factors were identified. The diagram of the interconnections of these factors is identified and limitations for the algorithm are for- mulated based on the theory of systems analysis. The algorithm for selecting the rational regular urban route for the electric bus operation has been developed. It enables creating the simulation model for selecting a rational regular urban route for the operation of an electric bus.Results. The diagram of factors influencing the selection of a rational regular urban route for the operation of an electric bus, taking into account their mutual relations, has been formed. The algorithm and simulation model for se- lecting a rational regular urban route for the operation of an electric bus has been developed. Several urban routes in Tyumen were assessed for the rationality of the introduction of electric buses.Discussion and conclusions. Evaluation of five regular urban routes in Tyumen using the developed algorithm and the simulation model revealed three rational routes, and also showed the inefficiency of the other two. It due to the discrepancy between the duration of the charging session and breaks in operation, as well as the insufficient charge level of the traction battery to ensure the required autonomous movement of the vehicle. In the course of the continuation of these studies, the developed algorithm will be supplemented with the stage of economic assess- ment of routes for the operation of electric buses.

The research deals with the issue of slums, urban sprawl on agriculture land and its impact on the city of Baghdad. This topic needs close attention because it has become a problem facing the city of Baghdad through recruiting agricultural lands and converting them to residential homes in addition to the transgression on the state lands and building abuses. This research deals with the causes of slums, irregular urban sprawl and risks of excesses on land uses of land in Baghdad. In this research, we try to know the extent to which these problems have affected the city of Baghdad. The research methodology based on the descriptive methodology to clarify the factors affecting urban sprawl at the expense of agricultural land, using studies in government and service institutions and images from satellites to clarify the size of urban sprawl over periods after the 2003 war. Finally, a conclusion and future solutions were set to solve these problems.

Mining and mineral processing industry adversely affects ecosystems and communities in nearby areas, including high freshwater consumption and scarcity. That is why the emerging global trend is to use sea water in flotation to recover valuable minerals from finely disseminated base metals ores. Recent studies investigate sea water flotation of copper, molybdenum, nickel sulphides and pyrite, while flotation of sphalerite, the main valuable mineral for zinc production, remains uncovered. This paper examines the feasibility of sphalerite flotation by conventional collectors in artificial sea water using a bubble-particles technique and frothless flotation tests. Potassium isopropyl xanthate (PIPX) and sodium isopropyl dithiophosphate (SIDTP) were used as collectors, and copper sulphate was introduced as the activator, while zinc sulphate and sodium sulphide were used as depressants. We examined the most common size fractions of sphalerite: medium (−74 + 44 μm) and fines (−44 μm). The findings showed the feasibility of sphalerite flotation in artificial sea water. We also established correlations between the rate of bubble-particle attachment and the sphalerite flotation recovery resulting in the growth of flotation recovery with the increase of the bubble-particle attachment rate. The results can be used as guidelines in choosing flotation reagents for sphalerite flotation in sea water. Another practical application of the results is the potential for sustainable development of the industrial sector, ecosystems and societies due to the replacement of fresh water by sea water, although further technological and environmental studies are required.

Based on the children’s road traffic injuries analysis and field pedestrians’ behavior observations during the roadway crossing, in order to reduce accidents among pedestrians-children, to create safe approaches to educational institutions is proposed.

This study searches the impact of tourism growth on emission pollutants in Cyprus (north), which is a small island in the Mediterranean and has shown significant development in hotel and casino sectors in the last two decades. Results from time-series analyses reveal that an inverted U-shaped EKC hypothesis is confirmed for Cyprus with and without tourism development. Tourism also exerts positively significant and long-term effects on the levels of carbon emissions, revealing that growth in the tourism sector causes degradation in the environment.

The development of a concrete mixture design process for high-quality concrete production with sustainable values is a complex process because of the multiple required properties at the green/hardened state of concrete and the interdependency of concrete mixture parameters. A new multicriteria decision making (MCDM) technique based on Technique of Order Preference Similarity to the Ideal Solution (TOPSIS) methodology is applied to a fuzzy setting for the selection of concrete mix factors and concrete mixture design methods with the aim towards sustainable concrete quality management. Three objective properties for sustainable quality concrete are adopted as criteria in the proposed MCDM model. The seven most dominant concrete mixture parameters with consideration to sustainable concrete quality issues, i.e., environmental (density, durability) and socioeconomic criteria (cost, optimum mixture ingredients ratios), are proposed as sub-criteria. Three mixture design techniques that have potentiality to include sustainable aspects in their design procedure, two advanced and one conventional concrete mixture design method, are taken as alternatives in the MCDM model. The proposed selection support framework may be utilized in updating concrete design methods for sustainability and in deciding the most dominant concrete mix factors that can provide sustainable quality management in concrete production as well as in concrete construction. The concrete mix factors found to be most influential to produce sustainable concrete quality include the water/cement ratio and density. The outcomes of the proposed MCDM model of fuzzy TOPSIS are consistent with the published literature and theory. The DOE method was found to be more suitable in sustainable concrete quality management considering its applicable objective quality properties and concrete mix factors.