• Energy Research
• 11. Sustainability close
• 1. No poverty close
• SA close

As smart cities become a global topic, interest in smart mobility, the core of smart cities, is also growing. The technology that comes closest to general users is “autonomous driving”. In particular, the successful market entry and establishment of some private companies proved that “autonomous driving” is not technology of the future but imminent reality. However, safety in autonomous vehicles that rely on sensors instead of the driver’s five senses has been the focus of attention from the beginning and continues to be so. In this study, we attempted to counter this interest. Based on the actual data of thirty traffic accidents, assuming the AEBS (Autonomous Emergency Braking System) was installed to assist the driver in safe driving, it was reinterpreted through simulation to see what changes occurred in the accident. In the computer program, PC-Crash, the results were first analyzed through simulation using Euro NCAP (New Car Assessment Program)’s AEBS test standards. Subsequently, the other variables in the AEBS were controlled and the accident was reinterpreted by changing only the angle of the radar detection sensor. As a result, it was confirmed that a total of 27 accidents out of thirty accidents could have been prevented with the AEBS. In addition, it proved that the crash avoidance rate of vehicles gradually increased as the radar angle increased.

This study searches the impact of tourism growth on emission pollutants in Cyprus (north), which is a small island in the Mediterranean and has shown significant development in hotel and casino sectors in the last two decades. Results from time-series analyses reveal that an inverted U-shaped EKC hypothesis is confirmed for Cyprus with and without tourism development. Tourism also exerts positively significant and long-term effects on the levels of carbon emissions, revealing that growth in the tourism sector causes degradation in the environment.

Room occupancy prediction based on indoor environmental quality may be the breakthrough to ensure energy efficiency and establish an interior ambience tailored to each user. Identifying whether temperature, humidity, lighting, and CO2 levels may be used as efficient predictors of room occupancy accuracy is needed to help designers better utilize the readings and data collected in order to improve interior design, in an effort to better suit users. It also aims to help in energy efficiency and saving in an ever-increasing energy crisis and dangerous levels of climate change. This paper evaluated the accuracy of room occupancy recognition using a dataset with diverse amounts of light, CO2, and humidity. As classification algorithms, K-nearest neighbors (KNN), hybrid Adam optimizer–artificial neural network–back-propagation network (AO–ANN (BP)), and decision trees (DT) were used. Furthermore, this research is based on machine learning interpretability methodologies. Shapley additive explanations (SHAP) improve interpretability by estimating the significance values for each feature for classifiers applied. The results indicate that the KNN performs better than the DT and AO-ANN (BP) classification models have 99.5%. Though the two classifiers are designed to evaluate variations in interpretations, we must ensure that they have accurate detection. The results show that SHAP provides successful implementation following these metrics, with differences detected amongst classifier models that support the assumption that model complexity plays a significant role when predictability is taken into account.

The environmental control and management of municipal solid waste (MSW) dumping sites is considered one of the sensitive challenges faced by executive municipalities. This is especially true in Makkah due to the gradual increase in urban population and visitors, with an overall MSW generation of about one million tons per year. Consequently, the geo-environmental evaluation of the Kaakia dumping site shed light on the potential environmental threats, in terms of ambient air quality levels and meteorological parameters, in addition to geophysical inspection. An air quality survey discussed the major trends of ambient air pollutants (SO2, NO2, CO, O3, CH4, and PM10) downwind from the Kaakia dumping site. It indicated the presence of a significant increase in sporadic plumes of Methane concentration. The maximum hourly averages ranged between 22.9–26.6 µg/m3 for SO2, 44.4–64.0 µg/m3 for NO2, 0.86–1.38 mg/m3 for CO, 150.2–158.8 µg/m3 for O3, 5.09–5.9 ppm for CH4, and 955–994 µg/m3 for PM10. The ground penetrating radar (GPR) geophysical survey indicated the subsurface sequence of three geological layers, as confirmed by nearby bores of the investigated site: (1) a surface layer formed of alluvial sediments of sand, which were 2.5–3.1 m thick; (2) a second layer represented by sand and gravel, with a thickness of 4.6–6.5 m; and (3) a third layer equivalent to saturated alluvial sediments mixed with rock fragments that extended to a depth of 13 m. The signals of the GPR were attenuated at the base of the conducted profiles due to the percolation of generated leachate to the subsurface sequence and contaminated groundwater aquifer.

Deployment of photovoltaic (PV) systems has recently been encouraged for large-scale and small-scale businesses in order to meet the global green energy targets. However, one of the most significant hurdles that limits the spread of PV applications is the dust accumulated on the PV panels’ surfaces, especially in desert regions. Numerous studies sought the use of cameras, sensors, power datasets, and other detection elements to detect the dust on PV panels; however, these methods pose more maintenance, accuracy, and economic challenges. Therefore, this paper proposes an intelligent system to detect the dust level on the PV panels to optimally operate the attached dust cleaning units (DCUs). Unlike previous strategies, this study utilizes the expanded knowledge and collected data for solar irradiation and PV-generated power, along with the forecasted ambient temperature. An expert artificial intelligence (AI) computational system, adopted with the MATLAB platform, is utilized for a high level of data prediction and processing. The AI was used in this study in order to estimate the unprovided information, emulate the provided measurements, and accommodate more input/output data. The feasibility of the proposed system is investigated using actual field data during all possible weather conditions.

This study aimed to realize Sustainable Development Goals (SDGs), i.e., no poverty, zero hunger, and sustainable cities and communities through the implementation of an intelligent cattle-monitoring system to enhance dairy production. Livestock industries in developing countries lack the technology that can directly impact meat and dairy products, where human resources are a major factor. This study proposed a novel, cost-effective, smart dairy-monitoring system by implementing intelligent wireless sensor nodes, the Internet of Things (IoT), and a Node-Micro controller Unit (Node-MCU). The proposed system comprises three modules, including an intelligent environmental parameter regularization system, a cow collar (equipped with a temperature sensor, a GPS module to locate the animal, and a stethoscope to update the heart rate), and an automatic water-filling unit for drinking water. Furthermore, a novel IoT-based front end has been developed to take data from prescribed modules and maintain a separate database for further analysis. The presented Wireless Sensor Nodes (WSNs) can intelligently determine the case of any instability in environmental parameters. Moreover, the cow collar is designed to obtain precise values of the temperature, heart rate, and accurate location of the animal. Additionally, auto-notification to the concerned party is a valuable addition developed in the cow collar design. It employed a plug-and-play design to provide ease in implementation. Moreover, automation reduces human intervention, hence labor costs are decreased when a farm has hundreds of animals. The proposed system also increases the production of dairy and meat products by improving animal health via the regularization of the environment and automated food and watering. The current study represents a comprehensive comparative analysis of the proposed implementation with the existing systems that validate the novelty of this work. This implementation can be further stretched for other applications, i.e., smart monitoring of zoo animals and poultry.

Abstract Mitigating the effects of environmental deterioration requires a focus on not just CO2 emissions from energy consumption, but also environmental pollution from industry sectors. To reach this goal, recent studies have extended ecological footprint (EF) analysis to identify the ecological drivers of various key industry sectors. The role of the phosphorus (P) industry on the EF within the environmental Kuznets curve (EKC) framework for China is the emphasis of this study. Autoregressive distributive lag (ARDL) as well as the impulse response function and robustness analysis were used to consider a time from 1985 to 2018. The study verifies the EKC hypothesis for China in both the long and the short run, and indispensable determinants are proposed to be included to assure the model’s fitness and robustness when conducting EF analysis of industry sectors. Energy consumption–based carbon emissions have been verified as the dominant contributor to EF, but P use and urbanization have a significant lagged positive influence on EF in the short run. P exports, in particular, have been highlighted as a critical driver of the EF of China’s P industry. The conducted frequency domain causality test reinforced the above findings and demonstrated bidirectional causality at different frequencies. This work suggests that formulating plausible P export policies to alleviate the conflict between the output of China’s P industry and the environmental sustainability of this industry are necessary. In this context, “multidisciplinary, multidimensional, and practical solutions” are most desirable for sustainable P management.

Pakistan is an energy deficient country with depleting energy reserves and increasing energy demand. Due to excessive population growth, the domestic and commercial energy sectors are experiencing rising demand. To meet the requisite demand, renewables are favored rather than conventional counterparts. In this study, we model hybrid power systems using solar, wind and biomass resources for electrifying remote areas. The four locations are chosen for the study around a developing country, Pakistan, where each site is designed according to an isolated microgrid with maximum indigenous resources potential as per the requisite demands. A survey is conducted for the load demand and biomass availability. Optimization is conducted across objectives of minimum levelized cost of the generated energy, least the net present cost and lesser payback period. The optimal results were achieved in-terms of required objectives across southern sites as compared to northern counterparts. The cost of generated energy is comparable to grid electricity and ensures 24 h power supply without cut off and load shedding to the un-electrified rural area. The hybrid power system has a low carbon footprint across emissions due to the use of renewable resources. All the estimated load of rural communities is met with the available resources and mid-career impact has also been conducted across 10 years of the project life to fulfill the increasing load demand of the communities after installation. The results are validated via comparative analysis and show the effectiveness of the proposed study.

The utilization of biomass energy is important from both an energetic and environmental point of view. Saudi Arabia has a considerable amount of biomass waste that can be converted to renewable energy using different technologies. This study evaluated and analyzed the quantity and energy potential of biomass waste, Greenhouse gases (GHG) emissions, and cost estimation of power generation using different conversion techniques. The results showed that the annual biomass waste in Saudi Arabia could reach approximately 31.50 million tons, which can generate 15 TWh of electricity. Municipal solid waste (MSW) is the largest contribution to the total waste and total power generation potential, which is approximately 70% and 74% of the total, respectively. Although incineration of MSW has the highest cost requirements, it has the highest power generation potential compared with the other studied techniques. However, the anaerobic digestion of other biomass types has the advantages of low costs and GHG emissions and generates considerable energy. The findings of this study can support decision-makers in developing sustainability strategies using eco-friendly and economical technologies for efficient power generation from biomass wastes.