• Energy Research
• Restricted close
• Embargo close
• US close
• SE close
• National Research Council close

Originally developed and validated at the Cabauw (Netherlands) topographically flat onshore location, the alpha-I wind resource extrapolating method was tested at the FINO3 offshore site in the North Sea (Germany). The aim was to prove its validity also when applied over a substantially different environment in terms of surface characteristics and stability conditions. Data from local mast at 30, 80, and 100 m were used, with extrapolations to 80-m and 100-m turbine hub heights accomplished based on 30-m turbulence intensity observations. Trained over a 2-year period (2011-2012), the method was validated on year 2013. Similarly to the onshore application, the method was reliable in extrapolating wind speed to both 80 m and 100 m, with bias within 5%, NRMSE = 0.20 and r = 0.94. Conversely, scores were largely better than at the onshore site in predicting the annual energy yield, biased by 0.41-1.02% at 80 m, and 1.12-1.36% at 100 m. The method proved to be highly sensitive to the stability classification, as not considering this option increased its biases to 4.51-5.93% at 80 m, and 7.46-8.23% at 100 m. Method's reliability might suitably help reduce the number of masts installed throughout a large offshore area.

In this paper some preliminary experimental results on a Zebra battery based propulsion system for urban bus applications are presented. The tests were carried out using a laboratory 1:1 scale test bench, composed by a 65 kW electric drive, specifically designed for urban bus applications, supplied by two 20 kWh Zebra batteries connected in parallel. The electric power train was tested on a laboratory bench, connected through a fixed ratio gear box to a 100 kW regenerative electric brake provided with speed and torque controls, in order to evaluate the propulsion system performance in steady state operative conditions. The obtained preliminary experimental results were utilized to implement a Matlab-Simulink model of urban bus, which might be powered by the same electric propulsion system studied. Thanks to this model it was possible to evaluate the dynamic behavior of the urban bus, working on standard driving cycles, taking into account the resistant forces represented by proper vehicle/road/aerodynamic parameters. An evaluation of the expected real vehicle driving range was also estimated in different road conditions.

The most widely used process for hydrogen production is steam methane reforming. It can be carried out using a membrane reactor in which simultaneous hydrogen production and purification occur. Mathematical modeling of these reactors plays a key role in the selection of the design and operating parameters that yield high performance for the reactor. This review study discusses, synthesizes, and compares different mathematical modeling studies on the packed bed membrane reactors for hydrogen production from methane found in the literature. Different approaches used in these modeling studies for the hydrogen permeation steps, reaction kinetic expressions, phases involved (pseudo-homogeneous and heterogeneous), and spatial dimensions (one, two, and three dimensional) are given.

Intention of this work is to investigate the opportunity and feasibility of energy efficient networking in Home and Building automation protocols. Wired HBAS have traditionally devoted a relatively little attention to this point, especially if compared to wireless networks. This paper will try to address the issue by evaluating the introduction of power state switching in a real scenario and proposing the concept of functional and spatial adjacency among packets.

Decentralized detection in a network of wireless sensor nodes involves the fusion of information about a phenomenon of interest (PoI) from geographically dispersed nodes. In this paper, we investigate the problem of binary decentralized detection in a dense and randomly deployed wireless sensor network (WSN), whereby the communication channels between the nodes and the fusion center are bandwidth-constrained. We consider a scenario in which sensor observations, conditioned on the alternate hypothesis, are independent but not identically distributed across the sensor nodes.We compare two different fusion architectures, namely, the parallel fusion architecture (PFA) and the cooperative fusion architecture (CFA), for such bandwidthconstrained WSNs, where each sensor node is restricted to send a 1-bit information to the fusion center. For each architecture, we derive expression for the probability of decision error at the fusion center. We propose a consensus flooding protocol for CFA and analyze its average energy consumption. We analyze the effects of PoI intensity, realistic link models, consensus flooding protocol, and network connectivity on the system reliability and average energy consumption for both fusion architectures. We demonstrate that a trade-off exists among spatial diversity gain, average energy consumption, delivery ratio of the consensus flooding protocol, network connectivity, node density, and PoI intensity in CFA. We then provide insight into the design of cooperative WSNs.

Alternative fuels and energy vectors are becoming increasingly important in terms of technical, geopolitical, economic, and environmental aspects. In particular, gaseous fuels and vectors, such as fossil or synthetic natural gas (NG) blended with hydrogen, commonly help provide optimal strategies to reduce global and toxic emissions of internal combustion engines, owing to their adaptability, anti-knock capacity, lower toxicity of pollutants, reduced CO2 emissions, and costeffectiveness. However, diesel engines still represent the reference category among internal combustion engines in terms of maximum thermodynamic efficiency. The possibility offered by dual-fuel (DF) systems to combine the efficiency and performance of diesel engines with the environmental advantages of gaseous fuels has been the subject of extensive investigations. However, the simple replacement of diesel fuel with gaseous fuel does not allow for optimising the engine performance, owing to the high percentage of unburned gaseous fuel, which compromises the potential reduction of CO2; therefore, more complex combustion strategies should be realised. In this study, with the aim of improving the DF combustion process, an experimental investigation was performed to analyse low-temperature combustion (LTC), using NG and two enriched hydrogen-compressed NG blends as primary fuels. The LTC mode was activated by means of a very early advanced pilot injection and carried out in two close steps. The double pilot injection was used to control the energy release rate in the first combustion stage, thereby minimizing the increase of the rate of pressure and allowing the extension of the operation range under LTC. The experimental activity was also focused on analysing the particle emissions, as it is well known that these emissions, together with those of nitrogen oxide, constitute the main pollutants resulting from diesel fuel combustion. The results demonstrated the potential to reduce the unburned fuel, NOx, and particle emissions simultaneously, while maintaining equivalent CO2 emissions to a diesel-only engine. Both the timing and pressure of the pilot injection proved to be critical parameters for optimising the emissions and performance

The aeroelastic behavior of a flexible plate subjected to a uniform axial flow is investigated in the presence of a rigid plane set parallel to the plate. It is shown that the ground effect reduces the flutter inflow velocity and strengthens the possibility of using the flag for extracting energy from winds and currents. The numerical analysis is carried out assuming that both the unsteady potential incompressible flow and the plate can be described with 2D models, i.e., a lumped vortex panel method and a nonlinear Euler-Bernoulli beam model, respectively, without losing the essential features of the fluid-structure interaction. Asymmetry of post-critical behavior (limit-cycle oscillations) and sensitivity of the results to the main flag parameters (distance from the ground, mass ratio and damping) are also considered, including also the energy distribution over the identified proper orthogonal modes. The investigated reduction of the flutter velocity in ground effect has been also confirmed with experimental tests relative to a polypropylene flag with and without the rigid panel mimicking the presence of the ground.

Clean combustion technologies, based on reactant dilution, have shown very peculiar and innovative characteristics. Reduction of light and noise emission and uniformity of temperature and composition distribution inside the combustion chamber, related to an extension of the reaction zone, make these processes very promising in several technological fields. Analysis of combustion in very diluted conditions is needed for a general understanding of these processes, which remain unknown from many aspects. The study is also useful for the identification of practical constraints which define the most suitable reactor configurations and working parameters for process reliability. The present work deals with a theoretical analysis of methane oxidation in diluted conditions using one of the detailed kinetic schemes available in the literature. A well-stirred reactor (WSR) configuration has been considered as a first attempt of process schematization. This choice is consistent with the experimental characterization of the flameless combustion processes. The influence of residence time, C/O ratio, and inlet temperature on the steady state was studied for an oxygen molar fraction (0.05), chosen as representative of flameless combustion processes. It has been pointed out that only rich conditions (C/O ? 0.25) are possible for WSR creation, because they allow partial methane conversion. Three kinetic regimes, related to different temperature ranges, have been identified on the basis of product distribution analysis. Both the oxidation and pyrolitic regimes, occurring respectively in low- and high-temperature ranges, are the most interesting working conditions for diluted combustion. The former, leading to CO and H2O as main reaction products, is suitable for reburning technology. The latter, which corresponds to large production of CO and H2, has been shown to be a reasonable explanation of flameless combustion. Advantages and potentials of this innovative process are analyzed, taking into account the kinetic pathway followed in the different working conditions.