• Energy Research
• 7. Clean energy close
• 8. Economic growth close
• 1. No poverty close
• BE close
• UA close
• Energies close

Wave Energy Converters (WECs) need to be deployed in large numbers in an array layout in order to have a significant power production. Each WEC has an impact on the incoming wave field, by diffracting, reflecting and radiating waves. Simulating the wave transformations within and around a WEC array is complex; it is difficult, or in some cases impossible, to simulate both these near-field and far-field wake effects using a single numerical model, in a time- and cost-efficient way in terms of computational time and effort. Within this research, a generic coupling methodology is developed to model both near-field and far-field wake effects caused by floating (e.g., WECs, platforms) or fixed offshore structures. The methodology is based on the coupling of a wave-structure interaction solver (Nemoh) and a wave propagation model. In this paper, this methodology is applied to two wave propagation models (OceanWave3D and MILDwave), which are compared to each other in a wide spectrum of tests. Additionally, the Nemoh-OceanWave3D model is validated by comparing it to experimental wave basin data. The methodology proves to be a reliable instrument to model wake effects of WEC arrays; results demonstrate a high degree of agreement between the numerical simulations with relative errors lower than 5 % and to a lesser extent for the experimental data, where errors range from 4 % to 17 % .

With the development of distributed energy resources, the low voltage distribution network (LVDN) is supposed to be the integrator of small distributed energy sources. This makes the users in LVDNs multifarious, which leads to more complex modeling. Additionally, data acquisition could be tricky due to rising privacy concerns. These impose severe demands on control schemes in LVDNs that the classical centralized control might not be able to fulfill. To tackle this, a model-free control approach with distributed decision-making architecture is proposed in this paper. Employing statistical methods and game theory, individual users in LVDNs achieve local optimum autonomously. Comparing to conventional approaches applied in LVDNs, the proposed approach is able to achieve active control with less communication burden and computational resources. The paper proves the convergence to the Nash Equilibrium (NE) and uses player compatible relations to form the specific equilibrium. A variant of the log-linear trial and error learning process is applied in a novel “suggest-convince” mechanism to implement the proposed approach. In the case study, a 103 nodes test network based on a real Belgian semiurban LVDN is illustrated. The proposed approach is validated and analyzed with practical load profiles on the 103 nodes network. In addition to that, centralized control is implemented as a benchmark to show the performance of the proposed approach by comparing it with the classical optimization result. The results demonstrate that the proposed approach is able to achieve player compatible equilibrium in an expected way, resulting in a good approximation to the local optimum.

A circular economy emerged as an alternative transition model, which is considered to be a solution to massive environmental degradation. The transition from a linear economy to a circular economy requires companies to be actively involved in more sustainable practices. For such a transition, companies must rethink, innovate on business models, and encourage sustainability-oriented innovation to deliver customer value, while simultaneously considering environmental and social aspects. On the other hand, the role of the circular economy in energy conservation and infrastructure has not been mapped out in the current literature. This systematic literature review seeks to map out the main interrelated topics of the circular economy and sustainability-oriented innovation, describing internal and external factors that need to be considered in the transition to a clean energy future. Key lines of research are identified, and suggestions for future research and for how to facilitate the movement towards a circular economy are provided. This study contributes to an enhancement of the literature by identifying priority areas regarding the circular economy and sustainability-oriented innovation to encourage future research that contributes to sustainability and environmental preservation.

A huge concern regarding global warming, as well as the depletion of natural fuel resources, has led to a wide search for alternative energy sources. Due to their high reliability and long operation time, thermoelectric generators are of significant interest for waste heat recovery and power generation. The main disadvantage of TEGs is the low efficiency of thermoelectric commercial modules. In this work, a unique design for a multilayer TE unicouple is suggested for an operating temperature range of 50–600 °C. Two types of thermoelectric materials were selected: «low temperature» n-and p-type TE materials (for the operating temperature range of 50–300 °C) based on Bi2Te3 compounds and «middle temperature» (for the operating temperature range of 300–600 °C) n- and p-type TE materials based on the PbTe compound. The hot extrusion technology was applied to fabricate n- and p-type low-temperature TE materials. A unique design of multilayer TEG was experienced to achieve an efficiency of up to 15%. This allows for the possibility of extracting this amount of electrical power from the heat generated for domestic and water heating.

This study assesses the bioenergy generation potential of crop residues in Ukraine for the year 2030. Projections of agricultural development are made based on the Global Biosphere Management Model (GLOBIOM) and verified against available Agricultural Member State Modeling (AGMEMOD) results in regard to the six main crops cultivated in Ukraine (wheat, barley, corn, sunflower, rape and soya). Two agricultural development scenarios are assessed (traditional and innovative), facilitating the projection of future crop production volumes and yields for the selected crops. To improve precision in defining agro-environmental limitations (the share of crop residues necessary to be kept on the fields to maintain soil fertility for the continuous cultivation of crops), yield-dependent residue-to-product ratios (RPRs) were applied and the levels of available soil nutrients for regions of Ukraine (in regard to nitrogen, phosphorus, potassium and humus) were estimated. The results reveal the economically feasible future bioenergy generation potential of crop residues in Ukraine, equaling 3.6 Mtoe in the traditional agricultural development scenario and 10.7 Mtoe in the innovative development scenario. The projections show that, within the latter scenario, wheat, corn and barley combined are expected to provide up to 81.3% of the bioenergy generation potential of crop residues.

This study aims to improve the design of scour protection around offshore wind turbine monopiles, as well as future-proofing them against the impacts of climate change. A series of large-scale experiments have been performed in the context of the European HYDRALAB-PLUS PROTEUS (Protection of offshore wind turbine monopiles against scouring) project in the Fast Flow Facility in HR Wallingford. These experiments make use of state of the art optical and acoustic measurement techniques to assess the damage of scour protections under the combined action of waves and currents. These novel PROTEUS tests focus on the study of the grading of the scour protection material as a stabilizing parameter, which has never been done under the combined action of waves and currents at a large scale. Scale effects are reduced and, thus, design risks are minimized. Moreover, the generated data will support the development of future scour protection designs and the validation of numerical models used by researchers worldwide. The testing program objectives are: (i) to compare the performance of single-layer wide-graded material used against scouring with current design practices; (ii) to verify the stability of the scour protection designs under extreme flow conditions; (iii) to provide a benchmark dataset for scour protection stability at large scale; and (iv) to investigate the scale effects on scour protection stability.

The transition to a more environmentally friendly energy matrix by reducing fossil fuel usage has become one of the most important goals to control climate change. Variable renewable energy sources (VRES) are a central low-carbon alternative. Nevertheless, their variability and low predictability can negatively affect the operation of power systems. On this issue, energy-system-modeling tools have played a fundamental role. When exploring the behavior of the power system against different levels of VRES penetration through them, it is possible to determine certain operational and planning strategies to balance the variations, reduce the operational uncertainty, and increase the supply reliability. In many developing countries, the lack of such proper tools accounting for these effects hinders the deployment potential of VRES. This paper presents a particular energy system model focused on the case of Bolivia. The model manages a database gathered with the relevant parameters of the Bolivian power system currently in operation and those in a portfolio scheduled until 2025. From this database, what-if scenarios are constructed allowing us to expose the Bolivian power system to a set of alternatives regarding VRES penetration and Hydro storage for that same year. The scope is to quantify the VRES integration potential and therefore the capacity of the country to leapfrog to a cleaner and more cost-effective energy system. To that aim, the unit-commitment and dispatch optimization problem are tackled through a Mixed Integer Linear Program (MILP) that solves the cost objective function within its constraints through the branch-and-cut method for each scenario. The results are evaluated and compared in terms of energy balancing, transmission grid capability, curtailment, thermal generation displacement, hydro storage contribution, and energy generation cost. In the results, it was found that the proposed system can reduce the average electricity cost down to 0.22 EUR/MWh and also reduce up to 2.22 × 106 t (96%) of the CO2 emissions by 2025 with very high penetration of VRES but at the expense of significant amount of curtailment. This is achieved by increasing the VRES installed capacity to 10,142 MW. As a consequence, up to 7.07 TWh (97%) of thermal generation is displaced with up to 8.84 TWh (75%) of load covered by VRES.

The growth in the number of cars and the increasing demand for fuels require scientific work to develop alternative fuels. The energy crisis, which is becoming more and more evident, is not unimportant. The manuscript presents an analysis of the possibility of using agricultural biofuels to power a diesel engine. The analysis was carried out in relation to the operation of the engine on conventional fuels. The D-241 engine under investigation is mainly used for agricultural tractors. During the tests carried out, the load characteristics of the diesel engine under investigation were determined as a function of fuel type and speed. The concentrations of CO, HC and NOx were analysed. Laboratory tests of the engine were carried out with a wide range of external loads to evaluate measurement errors for the measurement method. Experiments with the engine under investigation have shown that the hourly and specific biofuel consumption of diesel engines increases by an average of 11–16%. CO and NOx concentrations were found to be lower with increasing load compared to conventional diesel engines, while NOx concentrations are slightly increased. In all cases investigated, a decrease in exhaust development was observed.