• Energy Research
• engineering and technology close
• CN close
• UA close
• English close

Building materials have played a more and more important role in saving building energy since the central government of China set higher standards and requirements for new-constructed and retrofit buildings after 2005. Glazing units, especially energy-saving units including LOW-E coated glazing units and PVB laminated glass, are utilized nation-wide. This paper employs energy simulation to analyze the energy-saving effects of different glazing units in residential buildings in the city of Guangzhou, as an example of hot-humid climate in China. It appeals that the PVB laminated glass can refuse 44 % solar radiation to enter rooms and reduce 40 % of the shading coefficient comparing to clear glass. Meanwhile, in the aspects of operation and design of the HVAC system, 28 % of cooling load, 21 % of installed capacity and 8.6 % of full-load operation time can be saved.

Building materials have played a more and more important role in saving building energy since the central government of China set higher standards and requirements for new-constructed and retrofit buildings after 2005. Glazing units, especially energy-saving units including LOW-E coated glazing units and PVB laminated glass, are utilized nation-wide. This paper employs energy simulation to analyze the energy-saving effects of different glazing units in residential buildings in the city of Guangzhou, as an example of hot-humid climate in China. It appeals that the PVB laminated glass can refuse 44 % solar radiation to enter rooms and reduce 40 % of the shading coefficient comparing to clear glass. Meanwhile, in the aspects of operation and design of the HVAC system, 28 % of cooling load, 21 % of installed capacity and 8.6 % of full-load operation time can be saved.

The pitch control system has a profound impact on the development of wind energy, and yet a delay or non-minimum phase can weaken its performance. Thus, there is a strong incentive to enhance pitch control technology in order to counteract the negative effects of unidentified delays and non-minimum phase characteristics. To reduce the complexity of the parameter-tuning process and improve the performance of the system, in this paper, we propose a novel control method for wind turbine pitch angle with time delays. Specifically, the proposed control method is state-space PIDD2, which is based on internal model control (IMC) and the open-loop system step response. Then, considering the tracking, disturbance rejection and measurement noise, the proposed controller is verified through simulations. The simulation results demonstrate that the state-space PIDD2 (SS-PIDD2) can provide a trade-off between robustness, time domain performance and measurement noise attenuation and effectively improve pitch control performance in contrast to series PID and PI control methods.

The pitch control system has a profound impact on the development of wind energy, and yet a delay or non-minimum phase can weaken its performance. Thus, there is a strong incentive to enhance pitch control technology in order to counteract the negative effects of unidentified delays and non-minimum phase characteristics. To reduce the complexity of the parameter-tuning process and improve the performance of the system, in this paper, we propose a novel control method for wind turbine pitch angle with time delays. Specifically, the proposed control method is state-space PIDD2, which is based on internal model control (IMC) and the open-loop system step response. Then, considering the tracking, disturbance rejection and measurement noise, the proposed controller is verified through simulations. The simulation results demonstrate that the state-space PIDD2 (SS-PIDD2) can provide a trade-off between robustness, time domain performance and measurement noise attenuation and effectively improve pitch control performance in contrast to series PID and PI control methods.

With the development of SoC technology in recent years, the ultra-low power WiFi System on SoC Chip has emerged. As a result, WiFi-based Wireless Sensor Networks come into use, especially used in Automatic Meter Reading. While because the nodes of Wireless Sensor Networks have limited energy supply, smaller storage capability and slower calculation ability, the current WiFi technology cannot be directly applied to WiFi-based Wireless Sensor Networks. The protocols should be upgraded and the security algorithms should be improved to meet the new requests. Firstly, this article describes the network architecture of WiFi-based WSN for AMR system and discusses the reason for using this analogous Mesh architecture. Secondly, the new Hardware architecture of WiFi-based WSN node is designed to realize the AMR system and verify the research work. The node can collect the data of power meter by WiFi and can be powered by a Lithium Battery. Thirdly, on the basis of study work of WiFi original routing protocol HWMP, a new method on improving the energy saving ability of HWMP to adapt the new features of WiFi-based WSN is proposed. And the simulation work on the new routing protocol E-HWMP has been done with NS2 and the simulation results show that the life cycle of the network has been extended to some degree.

With the development of SoC technology in recent years, the ultra-low power WiFi System on SoC Chip has emerged. As a result, WiFi-based Wireless Sensor Networks come into use, especially used in Automatic Meter Reading. While because the nodes of Wireless Sensor Networks have limited energy supply, smaller storage capability and slower calculation ability, the current WiFi technology cannot be directly applied to WiFi-based Wireless Sensor Networks. The protocols should be upgraded and the security algorithms should be improved to meet the new requests. Firstly, this article describes the network architecture of WiFi-based WSN for AMR system and discusses the reason for using this analogous Mesh architecture. Secondly, the new Hardware architecture of WiFi-based WSN node is designed to realize the AMR system and verify the research work. The node can collect the data of power meter by WiFi and can be powered by a Lithium Battery. Thirdly, on the basis of study work of WiFi original routing protocol HWMP, a new method on improving the energy saving ability of HWMP to adapt the new features of WiFi-based WSN is proposed. And the simulation work on the new routing protocol E-HWMP has been done with NS2 and the simulation results show that the life cycle of the network has been extended to some degree.

Comparative analysis of three stabilization mechanisms of unstable states of physical systems is presented in this review. These mechanisms are: the quantum Zeno effect, the stabilization of unstable states in an external fast oscillating field (at the example of Kapitza pendulum), and the algorithm called as the principle of whirligig. The common features of these mechanisms, as well as the differences between them, are defined in the paper. In particular, it is shown that the stabilization of quantum systems is possible without involvement of such a notion as the collapse of the wave function. For stabilization there is enough to have such a stabilizing radiation flow when the Rabi frequency of transitions does exceed some frequency. This particular frequency is a magnitude inverse-ly proportional to the lifetime of the state under stabilization. It is shown that stabilization of unstable states by impact of rapidly oscillating forces occurs by non-self-consistent exposure, i.e. the dynamics of stabilizing field is independent of the dynamics of the stabilized state. Stabilization with the principle of whirligig does occur by self-consistent forces, and thus, in many cases stabilization by the use of the principle of whirligig can be more effective.

Comparative analysis of three stabilization mechanisms of unstable states of physical systems is presented in this review. These mechanisms are: the quantum Zeno effect, the stabilization of unstable states in an external fast oscillating field (at the example of Kapitza pendulum), and the algorithm called as the principle of whirligig. The common features of these mechanisms, as well as the differences between them, are defined in the paper. In particular, it is shown that the stabilization of quantum systems is possible without involvement of such a notion as the collapse of the wave function. For stabilization there is enough to have such a stabilizing radiation flow when the Rabi frequency of transitions does exceed some frequency. This particular frequency is a magnitude inverse-ly proportional to the lifetime of the state under stabilization. It is shown that stabilization of unstable states by impact of rapidly oscillating forces occurs by non-self-consistent exposure, i.e. the dynamics of stabilizing field is independent of the dynamics of the stabilized state. Stabilization with the principle of whirligig does occur by self-consistent forces, and thus, in many cases stabilization by the use of the principle of whirligig can be more effective.

With the introduction of distributed generators (DG), the traditional distribution system characterized by radical network becomes a multi-source one. Therefore the accuracy of the equivalent model of distributed generators directly affects the precision of fault location. To solve this problem, this paper proposed a fault location method based on complex correlation Thevenin equivalent and strong tracking filter (STF) in distribution network with DG. Strong tracking filter (STF) can be used for real-time extraction of fundamental wave phase and amplitude of single phase voltage and current, and fast track the power parameters mutation. The method of complex correlation Thevenin equivalent takes into account the randomness of measurement data, DG impedance and load to overcome measurement error caused by the uncertainty of the data, so that the construction of the DG impedance model is more accurate. Simulation results show that the method of fault location proposed in this paper has advantages of high accuracy and strong robustness.

With the introduction of distributed generators (DG), the traditional distribution system characterized by radical network becomes a multi-source one. Therefore the accuracy of the equivalent model of distributed generators directly affects the precision of fault location. To solve this problem, this paper proposed a fault location method based on complex correlation Thevenin equivalent and strong tracking filter (STF) in distribution network with DG. Strong tracking filter (STF) can be used for real-time extraction of fundamental wave phase and amplitude of single phase voltage and current, and fast track the power parameters mutation. The method of complex correlation Thevenin equivalent takes into account the randomness of measurement data, DG impedance and load to overcome measurement error caused by the uncertainty of the data, so that the construction of the DG impedance model is more accurate. Simulation results show that the method of fault location proposed in this paper has advantages of high accuracy and strong robustness.