• Energy Research
• 13. Climate action close
• 15. Life on land close
• 2. Zero hunger close
• US close
• CA close
• IT close

Abstract For 118 million residential housing units in the U.S., there is currently a gap between the potential energy savings that can be achieved through the use of existing energy efficiency technologies, and the actual level of energy savings realized, particularly for the 37% of housing units that are considered residential rental properties. Additional quantifiable benefits are needed beyond energy savings to help further motivate residential property owners to invest in energy efficiency upgrades. This research focuses on assessing the adoption of energy efficient upgrades in U.S. residential housing and the impact on rental prices. Ten U.S. cities are chosen for analysis; these cities vary in size across multiple climate zones, and represent a diverse set of housing market conditions. Data was collected for over 159,000 rental property listings, their characteristics, and their energy efficiency measures listed in rental housing postings across each city. Following an extensive data quality control process, over thirty different types energy efficient features were identified. The level of adoption was determined for each city, ranging from 5.3% to 21.6%. Efficient lighting and appliances were among the most common, with many features doubling as energy efficient and other desirable aesthetic or comfort improvements. Then using propensity score matching and conditional mean comparison methods, the relative impact on rent charged in each city was calculated, which ranged from a 6% to 14.1% increase in rent for properties with energy efficient features, demonstrating a positive economic impact of these features, particularly for property owners. This was further subdivided into five types of energy efficiency upgrade and three housing types. Single family homes generally demanded higher premiums with energy efficient features, however there was not a consistent pattern across the types of efficient upgrades. The results of this work demonstrate that investment in energy efficient technologies has quantifiable benefits for rental property owners in the U.S. beyond just energy savings. This methodology and results can also be used in other cities and by property owners, utility companies, or others, ultimately encouraging further investment and positive economic impact in residential energy efficiency and in turn improving energy and resource conservation in the building sector.

We present the first calculations to follow the evolution of all stable isotopes (and their abundant radioactive progenitors) in a finely zoned stellar model computed from the onset of central hydrogen burning through explosion as a Type II supernova. The calculations were performed for a 15 solar mass Pop I star using the most recently available set of experimental and theoretical nuclear data, revised opacity tables, and taking into account mass loss due to stellar winds. We find the approximately solar production of proton-rich isotopes above a mass number of A=120 due to the gamma-process. We also find a weak s-process, which along with the gamma-process and explosive helium and carbon burning, produces nearly solar abundances of almost all nuclei from A=60 to 85. A few modifications of the abundances of heavy nuclei above mass 90 by the s-process are also noted and discussed. New weak rates lead to significant alteration of the properties of the presupernova core. 10 pages, 4 figures, Nuclear Astrophysics X Workshop proceedings

Yeast volatiles double starvation survival in Drosophila .

Abstract Large-scale cultivation of microalgal biomass in open systems can benefit from the low cost of using natural sunlight, as opposed to artificial light, but may encounter problems with photoinhibition, high evaporation rates, potential contamination and high energy demand. Wavelength selective luminescent solar concentrator (LSC) panels can solve some of these problems when incorporated into low-cost sheltered structures for algal biomass production that concurrently produce their own electricity by harnessing select portions of solar energy, not used for algal growth. The LSC panels in this study contained a fluorescent dye, Lumogen Red 305, which transmits blue and red wavelengths used for photosynthesis with high efficiency, while absorbing the green wavelengths and re-emitting them as red wavelengths. The fluorescently generated red wavelengths are either transmitted to boost algal growth, or waveguided and captured by photovoltaic cells to be converted into electricity. We found that different strains of microalgae (currently used commercially) grew equally well under the altered spectral conditions created by the luminescent panels, compared to growth under the full solar spectrum. Thus this technology presents a new approach wherein algae can be grown under protected, controlled conditions, while the cost of operations is offset by the structure's internal electrical production, without any loss to algal growth rate or achievable biomass density.

Summary Monitoring of microbial corrosion is always difficult because of the sessile nature of bacteria and the lack of meaningful correlation between routine bacteria counts and bacterial activity. This problem is further aggravated in a large oilfield water system because of size and sampling difficulties. This paper discusses some monitoring techniques currently used in the oil industry, their limitations, and possible areas for improvement. These improved techniques are in use or will be implemented in the Aramco systems. Introduction Microbial corrosion has caused some failures in seawater injection systems. Whether or not microbial corrosion represents a major corrosion mechanism in the oilfield water system is a controversial question. However, it has certainly become a major concern in recent years. There are two approaches in dealing with microbial corrosion problems in a large oilfield water system. One approach is to start treating the system with bactericide in conjunction with regular scraping when the system is commissioned. The other is to treat the system only when an impending microbial-related problem is clearly defined. in either case, monitoring of microbial corrosion is essential. The first approach is more or less a precautionary measure. The treatment and selection of bactericides is usually based on past experience and laboratory evaluation tests. While the treatment is being implemented, a reliable monitoring program could assess the effectiveness of the current program of microbial corrosion control. In the second case, monitoring of microbial corrosion is even more important. it would provide timely information toward implementation of a treatment program before the system could get out of control. The industry's awareness of microbial corrosion has been indicated by the number of papers published in recent years on this subject. These articles cover a wide spectrum of interest from fundamental corrosion mechanisms to case studies, detection methods, control measures, etc. Although it is not clear to what extent microorganisms are responsible for the observed field corrosion failures, the general consensus still favors early establishment of a routine microbial corrosion monitoring program. The best approach seems to he the establishment of solid baseline data for the system after which any significant future deviation can be interpreted as a sign of a potential problem. The following sections describe the current methods used for routine monitoring, specifically for Aramco's large oilfield water systems. The limitations of these methods, the difficulties encountered, and some suggested studies for modification and improvement are discussed also. Current Monitoring Methods The methods currently used by Aramco can be categorized as (l) cell counts in water, (2) metal surface examination, (3) scraping solids analysis, (4) water quality analysis, and (5) evaluation of current bactericide treatment. Cell Counts in Water. These are used to detect bacterial organisms and their concentrations. it is recognized that confirmation of free-flowing bacteria in the water does not automatically mean trouble. However, if bacteria counts demonstrate a definite increase across the system, or over a period of time, the odds are that bacteria are active and working on the metal somewhere in the system. Cell counts routinely monitored include sulfate-reducing bacteria (SRB), general aerobic bacteria (OAB), iron bacteria, and others. SRB are widely recognized to he primarily responsible for bacteria-induced corrosion in an anaerobic environment. Depending on the nature of the sample to be tested and the types of problems encountered (or expected) in the field, one or several different enumeration techniques are employed. For field work, the method generally used by Aramco is culturing of samples in liquid growth media specifically designed for detecting a certain group of organisms. These laboratory media are prepared using the appropriate field water as a base, with addition of general growth nutrients for the organisms. The use of field water to prepare the media provides a water composition similar to that in which the bacteria originated. The media are supplemented with other ingredients to create an environment conducive to growth of certain bacteria (e.g., certain reducing agents have to he added into the SRB media). The media then are dispensed into serum vials at exactly 9 mL [9 cm3] each and sealed with rubber stoppers and aluminum seals. JPT P. 1171

An experimental study on the flow and heat transfer in open vertical enclosures, representing elevator shafts, warehouses, and atriums, due to a building fire is carried out, using a scale model. Smoke and hot gases are injected into the enclosure at a lower opening and the resulting downstream flow and temperature fields are studied. The inlet temperature and flow rate of the hot gases are varied over wide ranges to simulate the flow due to fire in multi-leveled buildings with vertical open shafts or atriums under natural ventilation. The conditions at the outlet, which is located on the same wall as the inlet, are also monitored to determine the effects of entrainment into the flow and heat transfer to the walls. Typical values of the operating conditions have been investigated, ranging from high buoyancy levels, for which the flow stays close to the vertical wall of the enclosure, to much lower levels, at which the flow enters the enclosure with a significant flow velocity and spreads outward very quickly. With increasing temperature at the inlet, the buoyancy effect is larger, resulting in higher velocities and shorter time to reach the top. The measured temperature at the outlet depends on heat transfer to the walls as well as on the flow velocity. Detailed measurements of the velocity and temperature fields have also been taken. It is found that a wall plume is generated which conveys the hot fluid rapidly along the vertical wall containing the inlet and the outlet. A recirculating flow arises away from this wall and this flow affects the heat transfer and flow in the wall plume. This feature, in turn, affects the entrainment into the flow, decay of the temperature level and the evolution of mean flow. Therefore, horizontally uniform conditions cannot be assumed here, as employed in several studies of tall enclosures. The wall plume has to be modeled in this case, considering the entrainment into the boundary layer flow and the effect of the recirculating flow.

Abstract This work, framed in the IEA SHC Task 51 “Solar Energy in Urban Planning”, presents an illustrative perspective of solar energy in urban planning through the analysis of 34 international case studies conducted in 10 countries. The aim here is to examine challenges, barriers and opportunities for active solar systems and passive solar strategies by taking into consideration interrelated technical and non-technical aspects in ongoing and completed projects. It focuses on exposing potential pitfalls and illustrating lessons learned in case studies divided into three categories: (i) existing urban areas, (ii) new urban areas, and (iii) solar landscapes. The analysis has yielded insights into the solar energy strategy adoption, the evaluation of solar energy production, solar irradiation and daylighting, and the architectural quality, sensitivity and visibility of the solar systems for urban planning. The outcomes have implications to stimulate successful practices in implementing solar strategies in urban planning and facilitating their replicability worldwide by avoiding common mistakes.

Abstract This paper aims to present a feasibility study of the innovative plant for methanol synthesis from carbon dioxide-sequestered by fossil fuel power plant and hydrogen, which is produced by water electrolyzer employing the over-production on the electrical grid. The thermo-economic analysis is performed in the framework of the MefCO2 H2020 EU project and it is referred to the German economic scenario, properly taking into account the real market costs and cost functions for different components of the plant. Three different plant capacities for methanol production (4000 10,000 and 50,000 ton/year) have been investigated, assuming an average cost for electrical energy to feed electrolysers and analyzing the influence of the most significant parameters (oxygen selling option, methanol selling price and electrolysers’ capital cost) on the profitability of the plant. The analysis has been performed in W-ECoMP, software for the thermo-economic analysis and plant optimization developed by the University of Genoa.