• Energy Research
• Restricted close
• DE close
• EU close
• CH close
• US close
• BE close
• English close

This scenario set of consistent national and global low-carbon development pathways, developed as part of the CD-LINKS project, takes current national policies and the Nationally Determined Contributions (NDCs) as an entry point for short-term climate action, then transitioning to the long-term temperature goals of 1.5 and 2°C as defined by the Paris Agreement. The scenarios explore the complex interplay between climate action and development, while simultaneously taking both global and national perspectives and thereby informing the design of complementary climate-development policies. The CD-LINKS consortium brought together national and global integrated assessment modeling teams from Europe, China, India, Brazil, Russia, Japan and the USA as well as domain experts in the areas of human development, climate adaptation, economics, energy geopolitics, atmospheric chemistry, human health, land use, agriculture, and water. The data is available for download at the CD-LINKS Scenario Explorer. The license permits use of the scenario ensemble for scientific research and science communication, but restricts redistribution of substantial parts of the data. Please refer to the FAQ and legal code for more information.

Globalization has changed the way global society addresses common and global problems.

Dielectric elastomers are highly promising as functional materials for the rapidly developing field of flexible actuator and generator technology. They offer a unique combination of low densities and large reversible deformations of up to more than 100% in area, and consequently have great potential for many new types of application. However, implementation has been impeded by the lack of specialized materials. The elastomers that have so far been investigated suffer from a number of disadvantages, including the need for very high activation voltages and limited service lifetimes. This thesis describes an investigation of the use of elastomeric composites as dielectric elastomers with the aim of optimizing and improving their performance in actuators. The influence of materials properties on actuation was first analyzed on the basis of a simple physical model and materials properties derived from standard test methods. The implications for the actuation performance of three conventional dielectric elastomers were then considered in detail. A preliminary conclusion was that the actuation performance could be improved if the permittivity of the elastomers were to be increased by modification with ceramic or conductive fillers. However, actuation performance was shown to depend not only on the permittivity, but also on the elastic modulus, the electrical breakdown strength, and strain hardening. Thus, although significant increases in permittivity were achieved by this approach, actuation performance was compromised by an increase in modulus in the case of the ceramic fillers, and a dramatic drop in electrical breakdown strength, in the case of the conducting fillers. A more promising approach was therefore suggested to be the use of an organic conducting filler encapsulated in an insulating matrix. It was demonstrated that it is indeed possible to increase the permittivity of a given elastomer while maintaining a high electrical breakdown strength. Different processing routes were investigated in order to control the dispersion of the filler and tailor performance. The optimum filler concentration, i.e. that providing the best compromise between permittivity and stiffness, was determined to be approximately 16 vol%, resulting in an improvement by a factor of 2 in actuation strain for a given applied voltage over that obtained with the unmodified matrix. Higher filler concentrations were also argued to have considerable potential for use in generators, given that the observed increased permittivity was also associated with high electrical breakdown strengths and increased strains at break. A threefold increase in converted energy per working cycle was predicted for a composite containing 25.5 vol% fillers based on a simplified model for a dielectric elastomer generator. Whilst these results are extremely encouraging, it is concluded that the composite approach has, in general, only limited potential as a means of obtaining further increases in actuation performance. The major difficulty remains that the use of a relatively rigid second phase to increase dielectric performance will inevitably also increase the elastic modulus beyond a certain filler concentration. As argued in the final part of the thesis, the way forward may therefore ultimately depend on the development of new types of synthetic elastomeric matrix materials that combine intrinsic improvements in electrical response with reduced moduli.

Distributed power generation and cogeneration of heat and power is an attractive way toward a more rational conversion of fossil and bio fuels. Solid oxide fuel cell (SOFC) – gas turbine (GT) hybrid systems are emerging as the most promising candidates enabling the achievement of a cleaner and more efficient conversion of a large variety of resources across a broad power range covering from small to medium scale applications. This thesis introduces an innovative concept of SOFC-GT hybrid system that allows reaching efficiencies higher than the state of the art while enabling the carbon dioxide separation and avoiding fuel cell pressurisation technical issues. Several hybrid system design alternatives based on this concept are analysed through a thermodynamic optimisation approach combining process modelling, advanced process integration techniques and multi-objective optimisation. A number of optimal hybrid system configurations are determined for different design targets. The results consistently demonstrate the higher energy conversion performance and flexibility enabled with respect to the state of the art. The innovative concept analysis is extended to two applications for which SOFC-GT hybrid cycles are expected to provide the most significant impact toward sustainability: the small scale distributed generation and the conversion of renewable resources. A simplified version of the new hybrid system layout is especially developed for small scale distributed generation, typical of residential building applications (5-10 kWel). Experimental data are used to prove the technical feasibility of the system and to assess the performance potentially achievable with currently feasible technologies. The results of the analysis underline that energy conversion efficiencies higher than traditional centralised power generation can be achieved even at such a small scale. A systematic process integration and optimisation approach is used to assess the energy conversion performance of the original SOFC-GT hybrid cycle fuelled with hydrothermally gasified wet waste biomass. The analysis highlights the considerable potential of the integrated system that allows for converting wet waste biomass into electricity with First Law efficiency higher than 60% while simultaneously enabling the separation of the biogenic carbon dioxide.

M.J.M. acknowledges funding from FCT through the grant SFRH/BPD/115566/2016. ALTALUZ (Reference PTDC/CTM-ENE/5125/2014). The optical properties of localized surface plasmon resonances (LSPR) sustained by self-assembled silver nanoparticles are of great interest for enhancing light trapping in thin film photovoltaics. First, we report on a systematic investigation of the structural and the optical properties of silver nanostructures fabricated by a solid-state dewetting process on various substrates. Our study allows to identify fabrication conditions in which circular, uniformly spaced nanoparticles are obtainable. The optimized NPs are then integrated into plasmonic back reflector (PBR) structures. Second, we demonstrate a novel procedure, involving a combination of opto-electronic spectroscopic techniques, allowing for the quantification of useful and parasitic absorption in thin photovoltaic absorber deposited on top of the PBR. We achieve a significant broadband useful absorption enhancement of 90% for 0.9 µm thick μc-Si:H film and demonstrate that optical losses due to plasmonic scattering are insignificant below 730 nm. Finally, we present a successful implementation of a plasmonic light trapping scheme in a thin film a-Si:H solar cell. The quantum efficiency spectra of the devices show a pronounced broadband enhancement resulting in remarkably high short circuit current densities (Jsc). preprint published

The constituent countries of the MENA region---defined in this thesis in conformity with the regional definition of the International Energy Agency and encompassing 17 Muslim countries in North Africa, in the Levant, on the Arabian Peninsula, and Iran---have developed very rapidly over the past decade. Two figures best exemplify the region's tremendous transformation: Total population has expanded by more than 20% and its aggregate economic output has more than doubled. As much as this development is desirable, said development trends have also dramatically reshaped the energy policy environment in the MENA region and began causing problems of their own---affecting the region's large oil exporters and its energy importers alike. Having traditionally enjoyed high energy security and handsome resource rents by virtue of their abundant and cheap fossil fuels, new realities in the domestic energy systems demand a new policy focus on domestic energy issues. Energy challenges have emerged which threaten security of supply, fiscal stability, and environmental integrity. The challenges differ in magnitude from country-to-country and reflect the specific national conditions and circumstances. However, given the similarity in the underlying drivers and the governing energy policies, the energy challenges resemble each other across borders. More specifically, ballooning domestic energy demand consumes a rising share of national energy production and thus increasingly imperils the constant flow of the much needed proceeds from oil and gas exports. In the MENA countries with less abundant hydrocarbon resources, domestic demand growth has heightened energy dependence and, to make matters worse, the tighter supply situation in the energy exporting neighbors may eventually also lead to a discontinuation of the preferential supply agreements which they have benefitted from in the past. As a further corollary of demand growth, massive capital-intensive infrastructure investments are necessary to keep pace with the growth on the demand side. The regional tradition to sell energy commodities domestically at prices non-competitive prices or even below cost, however, limits the national energy sectors' own capability of mustering the required capital. Finally, the universally observable heavily fossil fuel-dominated national energy mixes in the region render the study countries vulnerable to supply shocks. The virtually complete reliance on the regionally available hydrocarbons for meeting energy demand is also a principal contributor to environmental degradation and at the core of the large carbon footprint of energy consumption in MENA countries. Given current policies in combination with the emerging demographic and economic trends, these challenges must be expected to become more severe in the years to come. Rising living standards, especially in the region's expanding urban population, are likely to boost per capita energy consumption. The projected, continued demographic and economic growth will further drive commodity demand. And the supply side cannot be counted on to mitigate the challenges under given policies. On the contrary. Although no reliable production projections are available, it stands to reason that production from the region's most prolific oil and gas fields---some of which have been producing for several decades now---will increasingly require the use of costly secondary and tertiary recovery methods and that some will eventually [...]

The BELIEF Project is a Coordination Action funded by the European Commission in the context of the FP6 and FP7 Programmes. It aims to create a platform where e-Infrastructures providers and users can collaborate and exchange knowledge, ensuring that e-Infrastructures are developed and effectively used worldwide, filling the gap separating the e-Infrastructures providers from the users, and thus contribute to the emergence of a competitive knowledge-based economy. To create this synergy among multi-disciplinary communities, BELIEF created a one-stop-shop providing a Portal and a Digital Library with a huge number of e-Infrastructures open access publications. The Digital Library offers uniform access to multimedia documentation providing continuously updated information on e-Infrastructures-related projects, initiatives and events. The contents are harvested from different sources, such as projects web sites, repositories and databases. The DL - implemented on top of the OpenDLib Digital Library Management System - provides services to support the submission, description, searching, browsing, retrieval, access, preservation and visualization of multimedia documents. Although designed to meet the needs of the e-Infrastructures community, the technology adopted by BELIEF can be easily adapted to meet the information and collaborative needs of other scientific communities.

It is recognised that several constraints such as the lack of knowledge and expertise of farmers, land users and policy makers concerning agroforestry systems establishment and management hamper the adoption of agroforestry systems (Camilli et al. 2017). AFINET project acts at EU level in order to direct research results into practice and promote innovative ideas to face challenges and solve practitioners' problems. AFINET proposes an innovative methodology based on the creation of a European Interregional Network, linking different Regional Agroforestry Innovation Networks (RAINs). RAINs represent different climatic, geographical, social and cultural conditions and enclose a balanced representation of the key actors with complementary types of expertise (farmers, policy makers, advisory services, extension services, etc.). The Italian RAIN is focused on the Extra-Virgin Olive Oil (EVOO) value chain, with the main aim to promote agroforestry management of local olive orchards. Olive trees are still managed traditionally, often in marginal sites, with minimal mechanization and relatively low external inputs such as chemical treatments in comparison to other crops. The presence of permanent crops (olive trees) guarantees a partially tree cover reducing hydrogeological risk. Soil management usually keeps natural grassing reducing soil carbon emission and increasing soil fertility (Bateni et al. 2017). Intercropping with cereals and/or fodder legumes and livestock can also be practiced in olive orchards, increasing the complexity of the olive tree multifunctional system. Moreover, olive orchards can be managed as agroforestry systems since they can be intercropped with arable crops (cereals, legumes) and/or combined with livestock (sheep, poultry). The RAIN process, involving local stakeholders, highlighted the main bottlenecks of the EVOO value chain related to communication and dissemination of knowledge, technical and management aspects, market and policy. In order to contrast bottlenecks and exploit opportunities of the olive oil supply chain, the identified innovations are: i) adoption of best practices: testing and experimenting innovative agroforestry systems introducing different crop/animals species and varieties; ii) improve the management of the olive orchards: encouraging and increasing the organic production; iii) valorisation of olive processing residues: identifying and testing innovative products (bio-materials, olive paste as example); iv) arise the awareness among consumers: educating people about the benefits of olive oil consumption, creating networks among stakeholders, improving marketing and commercialization. Creating a Bio-district, defined as a geographical area where farmers, citizens, tourist operators, associations and public authorities enter into an agreement for the sustainable management of local resources, emerged a powerful tool to implement the innovation in the local EVOO value chain.

Although mature technologies at competitive prices are largely available, solar thermal is not yet playing the important role it deserves in the reduction of buildings fossil energy consumption. The generally low architectural quality characterizing existing building integrations of solar thermal systems pinpoints the lack of design as one major reason for the low spread of the technology. As confirmed by the example of photovoltaics, the improvement of the architectural quality of building integrated systems can increase the use of a solar technology even more than price and technique. This thesis investigates the possible ways to enhance the architectural quality of building integrated solar thermal systems, and focuses on integration into façade, where the formal constraints are major and have most impact. The architectural integration problematic is structured into functional, constructive and formal issues, so that integration criteria are given for each architectural category. As the functional and constructive criteria are already recognized by the scientific community, the thesis concentrates on the definition of the formal ones, yet underestimated or misunderstood. The results of a large European survey over architects and engineers perception of building integration quality are presented, showing that for architects formal issues are not a matter of personal taste, but that they relate to professional competences, and consequently can be described. The solar system characteristics having an impact on the formal quality of the integration are identified (formal characteristics), the related integration criteria are assessed, and finally integration guidelines to support architect integration design work are given. The limits imposed by the collectors available in the market are pointed out, showing that the lack of appropriate products is nowadays the main barrier to BIST (Building Integrated Solar Thermal) architectural quality. A methodology for the development of new solar thermal collectors systems responding at the same time to energy production needs and building integration requirements is defined. The importance to ensure, within the design team, the due professional competences in both these fields is stressed. Three progressive levels of system "integrability" are defined in the path leading to the concept of "active envelope systems" and the main role of facade manufacturers is highlighted. The methodology is applied to unglazed and glazed flat plate systems, and new façade system designs are proposed that show the relevance of the proposed approach.

Natural gas is defined as a combustible mixture of hydrocarbons coming from ground deposits and it is mainly used as a source of energy for burners and motors. Its consumption is increasing worldwide, as this represents a cheap and abundant source of energy, while releasing less CO2 emissions than other fossil fuels, in addition to low emissions of particulates. The diversification of the supply sources of gas and the increase of international trading through pipelines and liquefied natural gas (LNG) shipments makes the gas quality vary more than before, which is a rising challenge for the natural gas industry, as currently the vast majority of gas appliances and motors are unable to adapt to changes in gas quality. This will even worsen in the upcoming years with the multiplication of biogas sources and power-to-gas systems that will be added to the pipeline networks. In order to accomodate the appliances to changes in gas quality, compact and low cost natural gas quality transducers have to be developped for the natural gas industry. The present Thesis aimed at investigating the existing methods to determine natural gas quality for combustion, focusing on the determination of the Wobbe Index (WI), which is a key parameter to set up the air-fuel ratio of the combustion in burners and motors, and to qualify a new type of dynamic viscosity transducer developped at Laboratoire de Production Microtechnique (LPM) of EPFL for the determination of the combustion properties. Inference transducers are a new kind of transducers that allow determining the combustion parameters of the gas by relating to fundamental thermo-physical parameters, and not through the determination of the concentration of the gas constituents, as in gas chromatographs and spectrometers. Here, the dynamic viscosity is chosen as the most promising thermo-physical property of a natural gas to relate to the WI and the Higher Heating Value (HHV). The viscometer takes measurements proportional to the resistance to flow of a gas through a capillary under the action of pulses of heat, and it can be therefore be described as a thermal pumping gas viscometer. A mathematical model and a finite element model (FEM) are used to predict the behavior of the system and for thermal optimization, which are combined by a thermal characterization of the system. The miniature heater used to generate the heat pulses inside the viscometer is a key element of the transducer, and after reviewing potential technologies, the design choices are reported and the fabrication process is exposed, followed by a mechanical and thermal characterization. In order to determine and validate the conversion of the WI from the dynamic viscosity, theoretical relations are analyzed and empirical characterizations are done with a test and calibration setup allowing to create given mixes of gases. Finally, the degradation of the transducer to contaminants of natural gas is investigated, and the analysis is focused to the characterization of the corrosion by the sulfur compounds of natural gas. Test vehicles are developed to study the effect of sulfur corrosion on metallic parts, electronic substrates, silicone adhesives and wirebonds materials, and experiments are held with the dedicated test setups developed at LPM of EPFL.