• Energy Research
• other engineering and technologies close
• 6. Clean water close
• US close
• JP close
• DE close
• UA close

This paper presents an analysis of the problem of reorientation of a riser pipe from an initially horizontal configuration during subsurface tow to the vertical position for installation. Front and rear barges support the pipe through cables. The orientation into a vertical configuration is accomplished by paying out the front cable. The pipe is treated as a Bernoulli-Euler beam with significant tension undergoing large angle deflections. A finite element procedure used state transfer matrices and successive linearization and the results show that the stress critical phase occurs when the pipe is going through the 60-deg angle to the horizontal direction.

Abstract Microorganisms used in syngas fermentation require nutrients to grow and convert syngas (CO, H2 and CO2) into various products. Many of the essential nutrients can be provided by biochar. Poultry litter biochar (PLBC) contains minerals and trace metals and has a high pH buffering capacity, making it suitable as a nutrient supplement. The effects of PLBC loadings from 1 to 20 g L−1 on syngas fermentation were determined in 250 ml bottle assays. Results showed that 10 and 20 g L−1 PLBC significantly increased ethanol production compared to standard yeast extract (YE) medium. Fermentations in a 3L continuous stirred tank reactor (CSTR) with 10 g L−1 PLBC with and without 4-morpholineethanesulfonic acid (MES) showed 64% and 36% more ethanol production, respectively, than standard medium. The acetic acid accumulated at the beginning of fermentation was completely converted to ethanol in all media tested in the CSTR. These results demonstrate the feasibility of using PLBC medium without costly MES in the CSTR to enhance ethanol production from syngas for potential use at commercial scale.

Energy is consumed at every stage of the cycle of water production, distribution, end use, and recycled water treatment. Understanding the nexus of energy and water may help to minimize energy and water consumption and reduce environmental emissions. However, the interlinkages between water and energy have not received adequate attention. To address this gap, this paper disaggregates and quantifies the energy consumption of the entire water cycle process in Beijing. The results of this study show that total energy consumption by water production, treatment and distribution, end use, and recycled water reuse amounts to 55.6 billion kWh of electricity in 2015, or about 33% of the total urban energy usage. While water supply amount increased by only 10% from 2005 to 2015, the related energy consumption increased by 215% due to water supply structural change. The Beijing municipal government plans to implement many water saving measures in the area from 2016 to 2020, however, these policies will increase energy consumption by 74 million kWh in Beijing. This study responds to the urgent need for research on the synergies between energy and water. In order to achieve the goal of low-energy water utilization in the future, water and energy should be integrated in planning and management.

This study aims to identify potential hydropower sites and calculate the theoretical potential hydropower capacity based on watershed modelling of the Mindanao River Basin (MRB) in the Philippines for the sustainable development of a previously unstudied region. The Soil and Water Assessment Tool (SWAT) was applied to delineate the watershed of the MRB and simulate the river discharges with inputs from observed precipitation and global gridded precipitation datasets. Observed weather data, such as temperature, humidity, and solar radiation, from four meteorological stations in the Philippines were also used as inputs for SWAT modelling. Simulated discharges were calibrated at three river gauges on the Nituan, Libungan and Pulangi Rivers. However, due to limited river discharge records, model validations were conducted in proxy basins: the calibrated model parameters in river A were used in the watershed modelling of proxy river B. Of the delineated 107 sub-basins in the MRB watershed, only 33 were identified as having potential sites for hydropower development. These potential sub-basins hosted a total of 154 potential sites with an estimated monthly average power capacity of 5,551.35 MW for all 33 sub-basins. The estimated theoretical power capacity of 15,266.22 MW for all sites in the MRB is approximately equivalent to the Philippines’ total available power capacity in 2017 of 15,393 MW. These sites were classified into 16 mini-scale hydropower sites, 114 small-scale hydropower sites and 24 medium-scale hydropower sites based on the simulated river discharges and potential power capacities. Based on these results, hydropower development could be an alternative to strengthen the exploration of renewable energy resources and improve the energy situation in Mindanao; hydropower development could also have mitigation effects on frequent floods in flat, low-lying downstream areas.

AbstractA simple experiment for capillary sealed trap shows that leakage would occur only from the weakest point in the trap. As an extens ion of this concept, the sequestrated and accumulated CO2 in the structural high may happen to leak from the unexpected weak point near the top of sealing layer. On the other hand, if CO2 were sequestrated into the flank of tilted aquifer, CO2 in separate phas e would migrate upward within aquifer with no CO2 leakage into the sealing layer above and leaving some residual amount behind. According to this concept, the best location for sequestration of CO2 could be the flank of the structure rather than the top.

A promising route to transition wastewater treatment facilities (WWTFs) from energy-consuming to net energy-positive is to retrofit existing facilities with process modifications, residual biosolid upcycling, and effluent thermal energy recovery. This study assesses the economics and life cycle environmental impacts of three proposed retrofits of WWTFs that consider thermochemical conversion technologies, namely, hydrothermal liquefaction, slow pyrolysis, and fast pyrolysis, along with advanced bioreactors. The results are in turn compared to the reference design, showing the retrofitting design with hydrothermal liquefaction, and an up-flow anaerobic sludge blanket has the highest net present value (NPV) of $177.36MM over a 20-year plant lifetime despite 15% higher annual production costs than the reference design. According to the ReCiPe method, chlorination is identified as the major contributor for most impact categories in all cases. There are several uncertainties embedded in the techno-economic analysis and life cycle assessment, including the discount rate, capital investment, sewer rate, and prices of main products; among which, the price of biochar presents the widest variation from $50 to $1900/t. Sensitivity analyses reveal that the variation of discount rates causes the most significant changes in NPVs. The impact of the biochar price is more pronounced in the slow pyrolysis-based pathway compared to the fast pyrolysis since biochar is the main product of slow pyrolysis.

Common to the Committee on Statistics of Drilling District 12 area are the recent exploration activities associated with the Central North American rift system or Mid-Continent geophysical anomaly (MGA), a major feature that runs from the Lake Superior area south into Kansas. For the last several years, much preliminary geologic and geophysical work has been undertaken, which usually proceeds a major play. The primary purpose is to test the Cambrian and Precambrian sediments know to have oil seeps in Wisconsin and Michigan. In 1984, Texaco USA drilled the first deep test, which was in Kansas. Although the well was apparently a dry hole, Texaco's findings have not been released. Kansas had a very active year with 7,451 completions, 45 more than those reported in 1983. The success rate of all wells drilled for oil or gas (7,307) was 57.5%, down slightly from 59.3% in 1983. Drilling for oil continued to predominate with 3,783 oil wells and 419 gas wells completed. Total footage was 22,486,535, up 4% from 1983. The average depth of a test drilled for oil or gas was 3,026 ft. In Missouri, the number of wells drilled for oil or gas declined 17% from 1983 levels. Most drilling continued to be in the western part of the state. A deep test in Vernon County penetrated 2,080 ft of Precambrian rocks. In Nebraska, 12 new discoveries were made in the western part of the state. Seven found new oil reserves, and 5 were tight holes; all were classified as new-field wildcats. The average depth was 5,465 ft in the 7 discoveries where the operator reported the total depth. In Mills County, Iowa, 4 wildcats were drilled to the Cambrian with depths from 3,000 to 3,300 ft. All were located approximately 35 mi north of the Tarkio field in northwestern Missouri. It is estimated that 2,000,000 ac are leased in Iowa along the MGA. In Minnesota, 400,000 ac were leased during 1984. The leases were concentrated mainly along the MGA from Duluth to the Iowa border. About 1,000 mi of Vibroseis was run across this feature. In Wisconsin, regional geophysical surveys along the MGA have been run. Companies are now doing more detailed seismic work. Acreage leased from October 1983 to January 1985 was estimated at 214,000 ac. A dry hole was drilled 1,000 ft into quartzite in Barron County.

Abstract The Oil and Gas industry is becoming more adept in reducing its impact on the environment and in showing optimal use of resources. This approach to environmentally friendly drilling offers the two-fold advantage of the reduction of the footprint of drilling operations while realizing savings by reducing waste treatment, hauling and remediation costs. The Harold Vance Department of Petroleum Engineering at Texas A&M University has incorporated an Environmentally Friendly Drilling System (EFD) design into its PE 661 graduate drilling class. The "661 Team Challenge" semester project was assigned to the students to "design a well on paper" using low impact drilling technology. A systems engineering optimization protocol approach was utilized to incorporate a number of current and emerging EFD technologies into a single clean drilling system with no or very limited environmental impact. A web-based decision optimization tool was developed to follow the systems approach technology evaluation procedure and select an optimal system. The resulting well designs were judged as to their suitability for implementation in a protected wetland on the Texas Gulf Coast. Introduction The Harold Vance Department of Petroleum Engineering at Texas A&M University offers a series of five graduate courses designed to introduce Petroleum Engineering to new graduate students with a limited Petroleum Engineering Background. One of these courses is PETE 661 Drilling Engineering where we teach "drilling for non-drillers". Although this course is designed for non-drillers, there are a number of students with considerable experience in drilling who take the course as a refresher or for exposure to an alternate view of Drilling Engineering.

Abstract Bitumen recovery by steam-solvent coinjection involves the coupled thermal/compositional mechanisms for reduction of bitumen viscosity. Reliable design of such processes requires reservoir flow simulation based on a proper phase-behavior model so that the oleic-phase viscosity near the steam-chamber edge can be modeled reliably. However, the effect of bitumen characterization (e.g., the number of pseudo components used) on steam-solvent coinjection simulation has not been studied in detail, and can be realized only after running multiple reservoir simulations, which is time consuming. There are two main objectives in this paper. One is to develop a reliable method for bitumen characterization by improving the fluid characterization method that was recently developed based on perturbation from n-alkanes (PnA). The other is to develop a novel analytical method for assessing the sensitivity of a particular coinjection simulation to bitumen characterization without having to perform reservoir simulations. A simulation case study is given to validate this analytical method. A proper number of pseudo components for bitumen characterization cannot be determined without considering the effect of phase behavior on the oleic-phase viscosity at chamber-edge conditions in steam-solvent coinjection simulation. Results show that the analytical method developed in this research can detect the sensitivity of recovery simulation to bitumen characterization without performing multiple flow simulations using different sets of fluid models. The PnA-based method developed for bitumen characterization gives reliable predictions of phase behavior for bitumen/solvent mixtures with a small amount of experimental data.

Abstract To address the problem of fossil fuel usage at the Missouri University of Science and Technology campus, using of alternative fuels and renewable energy sources can lower energy consumption and hydrogen use. Biogas, produced by anaerobic digestion of wastewater, organic waste, agricultural waste, industrial waste, and animal by-products is a potential source of renewable energy. In this work, we have discussed Hydrogen production and End-Uses from CHHP system for the campus using local resources. Following the resource assessment study, the team selects FuelCell Energy DFC1500™ unit as a molten carbonate fuel cell to study of combined heat, hydrogen and power (CHHP) system based on a molten carbonate fuel cell fed by biogas produced by anaerobic digestion. The CHHP system provides approximately 650 kg/day. The total hydrogen usage 123 kg/day on the university campus including personal transportation applications, backup power applications, portable power applications, and other mobility applications are 56, 16, 29, 17, and 5 respectively. The excess hydrogen could be sold to a gas retailer. In conclusion, the CHHP system will be able to reduce fossil fuel usage, greenhouse gas emissions and hydrogen generated is used to power different applications on the university campus.