• Energy Research
• US close
• GB close
• AU close
• AT close
• Energies close

This research investigates the relationships among renewable energy consumption, economic growth, and financial development in five sub-Saharan African nations utilizing panel data from 2000 to 2020. Econometric methods are used to ascertain the existence or absence of cross-sectional dependence and the short-run and long-run connections between the following factors: Pesaran cross-sectional dependence (CD) and cross-sectionally augmented IPS (CIPS) unit root tests, pooled mean group (PMG), and dynamic ordinary least squares (DOLS) estimations. The presence of cross-sectional dependence is found and represented with the CIPS unit root test. No significant short-run relationship is found between the variables of the study, yet a significant long-run relationship is present among them. A positive relationship exists between CO2 emissions and financial development, while financial development and renewable energy consumption are found to have negative relationships with CO2 emissions. The study also supports the scale effect of the environmental Kuznets curve hypothesis. Additionally, no causality is found among the variables, and impulse response and variance decomposition estimation are carried out to recommend future effects. Policy implications of findings are discussed, with accompanying suggestions.

Fire hazard during ship transportation of certain modern solid fuels is identified. A particular mechanism which may lead to catastrophic ship fire is discussed. A mathematical model predicting time to such fully developed fire (flashover time) I s proposed. An analytical solution is obtained for the developed model. An important part of this solution is a closed form analytical description of the smoke filling dynamics in a closed compartment. It is demonstrated that flashover time depends on a number of parameters. The relative importance of these parameters is discussed. Particular significance is attributed to fuel soot propensity (fuel soot yield) which is an intrinsic fuel property. This parameter controls the intensity of radiative heat exchange in the compartment, and its influence on flashover time is of paramount importance. It is suggested that fuels are ranked with respect to this parameter in order to describe their relative fire hazards. This ranking should be implemented into the regulatory framework governing fuel transportation by ships.

One direction in optimizing wind farm production is reducing wake interactions from upstream turbines. This can be done by optimizing turbine layout as well as optimizing turbine yaw and pitch angles. In particular, wake steering by optimizing yaw angles of wind turbines in farms has received significant attention in recent years. One of the challenges in yaw optimization is developing fast optimization algorithms which can find good solutions in real-time. In this work, we developed a random search algorithm to optimize yaw angles. Optimization was performed on a layout of 39 turbines in a 2 km by 2 km domain. Algorithm specific parameters were tuned for highest solution quality and lowest computational cost. Testing showed that this algorithm can find near-optimal (<1% of best known solutions) solutions consistently over multiple runs, and that quality solutions can be found under 200 iterations. Empirical results show that as wind farm density increases, the potential for yaw optimization increases significantly, and that quality solutions are likely to be plentiful and not unique.

This paper provides an overview of islanding fault detection in microgrids. Islanding fault is a condition in which the microgrid gets disconnected from the microgrid unintentionally due to any fault in the utility grid. This paper surveys the extensive literature concerning the development of islanding fault detection techniques which can be classified into remote and local techniques, where the local techniques can be further classified as passive, active, and hybrid. Various detection methods in each class are studied, and advantages and disadvantages of each method are discussed. A comprehensive list of references is used to conduct this survey, and opportunities and directions for future research are highlighted.

Matrix acidizing is a highly successful, effective, and relatively inexpensive approach to enhancing well productivity in carbonate formations. Accordingly, there has been little motivation to address the ways to optimize the acid stimulation process better. Acid-in-oil emulsions that form during this process cause one of the most challenging problems that negatively impact the performance and deliverability, especially when these emulsions are highly stable over extended periods. Such stable emulsions can plug the flow path of oil causing high resistance to flow and potentially reducing well productivity. De-emulsifiers are some of the most widely used acid additives targeting the reduction of emulsion stability. However, there is doubt in the research community on whether there is enough shear mixing that can cause the formation of emulsions inside the rock matrix. Besides, the effectiveness of de-emulsifiers in eliminating such emulsions in the pore space has not been investigated. In the current oil price market, there is a need to be more vigilant regarding the cost of well stimulation and the added value from the various additives. While laboratory work on matrix acidizing in carbonate formations is abundant, the work on oil-saturated samples is rare, and therefore, the effect of emulsions on the acidizing process has not been widely documented. In this work, we present a stacked study of bottle tests and core flooding tests designed to investigate the de-emulsifiers’ role in the rock matrix. The results reveal that (1) emulsion-risk in the pore space is real, and (2) the addition of de-emulsifiers to the acid allows for efficient backflow of oil, revealing an improvement in the performance of the acidizing treatment.

Different strategies are reported in the literature for energy saving in Closed Plant Production Systems (CPPS). However, not reliable evidences about energy consumption with the use of pulsed LED light technique in lighting system available in Plant Factory and Vertical Farm. In this work, three key points to determine the effects of pulsed LED light versus continuous LED light are presented: (1) A mathematical model and its practical application for stabilizing the energy equivalence using LED light in continuous and pulsed mode in different light treatments. (2) The quantum efficiency of the photosystem II was used to determine positive and/or negative effects of the light operating mode (continuous or pulsed) on chili pepper plants (Capsicum annuum var. Serrano). (3) Evaluation of energy consumption with both operation modes using ten recipes from the literature to grow plants applied in Closed Plant Production Systems, different Photosynthetic Photon Flux Density at 50, 110, and 180 µmol m−2 s−1, Frequencies at 100, 500, and 1000 Hz, and Duty Cycles of 40, 50, 60, 70, 80, and 90%. The results show no significant statistical differences between the operation modes (continuous and pulsed LED light). For each light recipe analyzed, a pulsed frequency and a duty cycle were obtained, achieving significant energy savings in every light intensity. The results can be useful guide for real-life applications in CPPS.

Under the “new normal”, China is facing more severe carbon emissions reduction targets. This paper estimates the carbon emission data of various provinces in China from 2008 to 2014, constructs a revised gravity model, and analyzes the network structure and effects of carbon emissions in various provinces by using social network analysis (SNA) and quadratic assignment procedure (QAP) analysis methods. The conclusions show that there are obvious spatial correlations between China’s provinces and regions in terms of carbon emissions: Tianjin, Shanghai, Zhejiang, Jiangsu and Guangdong are in the center of the carbon emission network, and play the role of “bridges”. Carbon emissions can be divided into four blocks: “bidirectional spillover block”, “net beneficial block”, “net spillover block” and “broker block”. The differences in the energy consumption, economic level and geographical location of the provinces have a significant impact on the spatial correlation relationship of carbon emissions. Finally, the improvement of the robustness of the overall network structure and the promotion of individual network centrality can significantly reduce the intensity of carbon emissions.

Partial discharge (PD) ultrasonic detection is an early sign of the insolation defects of power transformers. The early diagnosis of PD requires the high sensitivity and reliability of ultrasonic sensing systems. For this purpose, a reformative PD ultrasonic sensing system based on phase-shifted FBG (PS-FBG) was demonstrated. By using PS-FBG as the ultrasonic sensing unit, the ultrasonic sensing system improved the response to the ultrasonic signal and overcame the electromagnetic noise. To compensate for the influence of temperature change on the ultrasonic sensing system, an automatic wavelength scanning demodulating method was carried out. The wavelength spanning strategy was optimized based on the principle of cross-correlation, in order to quicken the spanning. A PD detection test in the transformer oil was conducted, and the result shows that PS-FBG was 17.5 times more sensitive than PZT. Because of the better ultrasonic response, the proposed system was able to achieve the early diagnosis of insolation faults in a power transformer.

DC to AC inverters are the well-known and improved in various kinds photovoltaic (PV) and gird tied systems. However, these inverters are require interfacing transformers to be synchronized with the grid-connected system. Therefore, the system is bulky and not economy. The transformerless inverter (TLI) topologies and its grid interface techniques are increasingly engrossed for the benefit of high efficiency, reliability, and low cost. The main concern in the TL inverters is common mode voltage (CMV), which causes the switching-frequency leakage current, grid interface concerns and exaggerates the EMI problems. The single-phase inverter two-level topologies are well developed with additional switches and components for eliminating the CMV. Multilevel inverters (MLIs) based grid connected transformerless inverter topology is being researched to avail additional benefits from MLI, even through that are trust topologies presented in the literature. With the above aim, this paper has proposed three -phase three-level T type NP-MLI (TNP-MLI) topology with transformerless PV grid connected proficiency. The CM leakage current should handle over mitigating CMV through removing unwanted switching events in the inverter pulse width modulation (PWM). This paper is proposes PV connected T type NP-MLI interface with three-phase grid connected system with the help of improved space vector modulation (SVM) technique to mitigate the CM leakage current to overcome the above said requests on the PV tied TL grid connected system. This proposed the SVM technique to mitigate the CM leakage current by selecting only mediums, and zero vectors with suitable current control method in order to maintain the inverter current and grid interface requirements. The proposed PV tied TNP-MLI offering higher efficiency, lower breakdown voltage on the devices, smaller THD of output voltage, good reliability, and long life span. The paper also investigated the CM leakage currents envisage and behavior for the three-phase MLI through the inverter switching function, which is not discussed before. The proposed SVM on TL-TNP-MLI offers the reliable PV grid interface with very low switching-frequency leakage current (200mA) for all the PV and inverter operation conditions. The feasibility and effectiveness of the TLI and its control strategy is confirmed through the MATLAB/Simulink simulation model directly as compared with 2kW roof top PV plant connected TL-TNP-MLI experimentation, showing good accordance with theoretical investigation. The simulation and experimental results are demonstrated and presented in the good stability of steady state and dynamics performances. The proposed inverter reduces the cost of grid interface transformer, harmonics filter, and CMV suppressions choke.