• Energy Research
• Closed Access close
• Restricted close
• US close
• GB close
• AU close

The paper describes formation and spreading of dense shelf waters in the Adriatic Sea (North Adriatic Dense Water, NAdDW) during the winter of 2012 as a consequence of an intense and long cold air outbreak of northeasterly Bora winds. As a result, during February 2012 northern Adriatic Sea water temperature dropped to about 6 degrees C and density exceeded 1030 kg/m(3), most likely the maximum value since 1929. NAdDW dynamics has been investigated by means of a 3-D ocean-wave coupled model running on a high resolution and eddy-permitting grid. The numerical experiments have relied on the Coupled-Ocean-Atmosphere-Wave-Sediment-Transport (COAWST) system forced one-way with atmospheric forcings provided by the model COSMO-17. A suite of observational data has been used to characterize the Bora event and evaluate numerical model performance. At sub-basin scales, the newly formed waters flowing southerly have produced a water renewal of the northern Adriatic, as more than 50% of water volumes have left the basin. Dense waters volume transports, evaluated through different Adriatic cross-sections, have been modulated by tides (damped for the densest water masses) and reached about 1 Sv. The contribution of wave-induced forcings has been quantified and examined, indicating that these represent a major driving mechanism during NAdDW production and spreading phases. This work provides evidence that NAdDW is spread accordingly with two different mechanisms: at early stages of its formation, the wind-driven ocean circulation pushes newly formed waters to leave the northern basin with relatively high speeds (about 0.30 m/s). Later on, remaining NAdDW leaks slowly out (0.09 m/s as average) from the production site. Residence times of dense waters in the north, middle, and south Adriatic Sea are also documented. (C) 2014 Elsevier Ltd. All rights reserved.

omega-Conotoxin and ethanol produce similar actions on in vitro calcium channel functions. The present study was designed to determine their possible behavioral interaction. omega-Conotoxin injected ICV at either 0.1 microgram or 0.3 microgram, produced an increase in spontaneous and evoked tremor activity in male Sprague-Dawley rats. The tremor was present at 30 min and continued at least 4 h after injection. At 4 h post ICV injection, animals were given an IP injection of ethanol (3 g/kg body weight). Although no blood alcohol differences were observed between groups, rats injected with omega-conotoxin showed a concentration-dependent increase in sleep times: Saline controls slept for an average of 84.7 +/- 16.7 min, 0.1 and 0.3 microgram conotoxin treated animals slept for 121.3 +/- 16.2 and 211.1 +/- 30.7 min, respectively. These results extend the class of calcium channel blockers capable of producing a behavioral interaction with ethanol.

Abstract A recent field survey provided eight typical soffits used in the residential houses within the typhoon-prone coastal region of southeastern China. Their aerodynamic effects in alleviating rooftop extreme wind pressures were evaluated via wind tunnel testing on a series of 1/20 gable roof house models. Local pressures, area-averaged pressures and uplift forces acting on roofs were examined. Results showed that in contrast to the model without soffits, the presence of these gutters or eaves gives a rise to a significant reduction of negative peak wind pressures at edges and corners near them. However, they hardly impact wind loads on the other roof surface. Some minor simple architectural elements attached to eaves, such as cantilevered spoiler and semicircular gutter, were observed to facilitate the reduction of extreme wind pressure at edges and corners. Additionally, the reduction rate of spatially averaged wind pressures with area was found to be dependent on the size of tributary area, rather than the shape of tributary area.

Abstract Bioenergy crops are one of the renewable energy options available to decarbonise the energy sector in Scotland and help to achieve the overall planned target of 80% reduction in greenhouse gas (GHG) emissions by 2050. A process-based model for poplar and willow developed for simulating the effect of different environmental and management options on growth and biomass yield was used to estimate the GHG abatement potential (GHG-AP) under different crop management options in Scotland. The model results of annual wood yield did not show a strong relation with any of the environmental factors except that of initial soil organic carbon (SOC) content. Increasing plant density and decreasing harvest frequency increased GHG-AP. Application of N-fertilizers at a rate of 50–100 kg N ha−1 resulted in the buildup of carbon in soils with less than 180 Mg C ha−1. However, in soils with greater SOC contents, annual emissions resulting from N fertilizer application were greater than the carbon saving through marginal increases in wood yield and SOC changes. The best management scenario in terms of economic and environmental objectives depends on identifying an optimum plant density based on the site specific conditions with a fertilizer application of 20–100 kg ha−1 y−1 and a five year harvest interval. Even under the best economic scenarios, SRC willow and poplar have a GHG-AP ranging from 9.9 to 11.6 and 8.8–10.0 Mg CO2 eq. ha−1 y−1, respectively. Under the best environmental scenarios this range increases to 10.5- 13.2 and 9–11.1 Mg CO2 eq. ha−1 y−1 for willow and poplar, respectively.

The extent of absorption and the intravascular itinerary of plasma-scalpel operating gas have been investigated by monitoring the intravascular and exhaled argon partial pressures during canine hepatic surgery. The blood-gas analysis was performed continuously, using a mass spectrometer to measure dissolved argon, and, periodically, using a gas chromatograph to quantify all argon ingested, including emboli. To quantify the amount of argon lost through the pulmonary circulation, monitoring took place in the right atrium and the aorta. Experimental results show that the amount of argon absorbed at the incision site and transported through the bloodstream may increase the dissolved argon concentration in the right atrium by as much as 150%. The results also indicate that argon may be present as emboli in the bloodstream, but that argon storage in the tissues is insignificant. The argon concentration in the aorta does not noticeably increase; hence the excess argon is exhaled within one circulation through the pulmonary circuit. These observations were substantiated by the use of an ultrasonic Doppler flowmeter to check for the presence of gas emboli at various locations.

Abstract In arid areas, dry cooling technology is a preferable alternate of wet cooling mainly owing to the scarcity of abundant water supply. However, the supercritical CO2 power cycle still offers considerable thermal performance even at higher ambient temperature using dry cooling. The novelty of this work is the exhaustive designing of dry cooler for supercritical CO2 cycles (recompression and partial cooling) in concentrating solar power application. Prior to the design of tower, a preliminary analysis is conducted in achieving the optimum main compressor inlet temperature (33 °C-recompression and 40 °C-partial cooling) at which the cycle delivers the maximal efficiency. The comparison is performed at same higher and lower pressure and for the partial cooling, the intermediate pressure is optimized. At relatively higher compressor inlet temperatures (above 50 °C), the partial cooling achieves higher efficiency while at lower temperatures (30–49 °C), the recompression shows superior performance. An iterative nodal method is used for the air-cooled finned tube heat exchanger units that takes account of the dramatic variation in thermodynamic properties of CO2 with the bulk temperature. Kroger’s detailed methodology of designing dry cooler is adapted with the implementation of nodal approach for CO2 property variation. A dry cooling tower with 52.45 m height is essential for the recompression cycle, whereas the partial cooling requires two towers of the height of 35.4 m and 38.7 m. A thermal assessment is carried out on the dry cooler under various cycle fluid inlet temperatures and ambient temperatures. During hot and humid ambient conditions, lower compressor inlet temperatures (up to 53.1 °C) are obtained with the recompression cycle compared to partial cooling (up to 64.5 °C). In extreme climate condition of 50 °C air temperature, the recompression cycle provides superior thermal efficiency (46.5% against 45.5%). For future commercialization of dry cooled sCO2 power plant, the recompression cycle is preferred due to its superior performance and lower capital cost for cooling tower design and solar field. The work demonstrates the impact of dry cooling tower design strategy in the context of cycle thermal assessment under various working condition.

Abstract Comprehensive information about the concentrations, distribution, and modes of occurrence of elements in coal are important from the environmental and economic point of view. Although a great number of previous studies have investigated the geology of coalbed methane in the Qinshui Basin, only a few studies focused on the inorganic constituents in coal. More specifically, the mode of occurrences of valuable element Li in the No. 3 Coal is still unclear, although Li was found enriched. In this study, we present mineral characteristics, as well as multi-element data on the Permian No. 3 Coal from the Sucun and Gaohe Mines, Changzhi City, southern Qinshui Basin. The studied coals are characterized by low- to medium-ash yield (Ad = 5.72%- 28.18%, 12.34% on average), low volatile matter yield (Vdaf = 8.49–15.17%, 10.96% on average), suggesting a low volatile bituminous coal to semi-anthracite. NH4-illite and kaolinite are the main minerals in the coals detected by XRD, and trace amount of minerals calcite, dolomite, quartz, pyrite and diaspore can also be found. The major elements of the studied No. 3 coals are dominated by SiO2 and Al2O3, ranging 2.49–16.45 wt% and 2.13–12.9 wt% (on a whole-coal basis), respectively. Li is enriched in the No. 3 coals (5

Abstract Fouling is one of the most significant problems for internally enhanced tubes installed in the shell and tube condensers. Due to the lack of long-term test data, current fouling models are developed based on accelerated particulate fouling tests that have the low precision and hence are inapplicable for predicting combined fouling in most practical cooling tower systems. In addition, the constant values of fouling resistance (factor) recommended by the Air-Conditioning, Heating, and Refrigeration Institute (AHRI) are extremely limited under different operating conditions. To overcome these challenges, this research developed and validated two fouling prediction models based on experimental long-term tests. One of the models was in the form of a ratio of asymptotic fouling resistance of the enhanced tube to that of the plain tube ( R f ∗ / R f , p ∗ ), and the other one was in the form of the asymptotic fouling resistance of the directly enhanced tube ( R f ∗ ). Both models considered water quality, water velocity, and the tube geometries as the variables with the acceptable accuracy for prediction. 1) For the water quality, the parameter of valid concentration ( C com ) of cooling water was defined in this study, which reflected the potential amount of valid components to form the fouling. 2) For the water velocity, its impacts on the two critical parameters of the fouling process: sticking probability ( P ) and deposit bond strength ( ξ ) were investigated using experimental studies. Test results showed that in enhanced tubes with the increased water velocity the sticking probability ( P ) decreased continuously while the deposit bond strength (ξ) initially increased, and then, decreased. 3) For the tube geometries, by taking the parameters of tube geometries as variables the multi-variable correlations of the sticking probability ( P ) and deposit bond strength ( ξ ) were developed. From the results the generalized fouling prediction model as a ratio of asymptotic fouling resistance ( R f ∗ / R f , p ∗ ) was recommended for the application in HVAC&R industry due to its suitability and accuracy in practical project applications.

There is a growing market for food producers to supply their goods direct to customers, which has largely been brought about by the growing popularity of web-based ordering. However, the geographical distance between supplier and consumer can be large and this presents problems if temperature-sensitive foods are to be transported. Here we describe a numerical model for the thermal experience of foodstuff packaged in expanded polystyrene boxes in the presence of a gel refrigerant. The model is validated by comparing predicted temperatures with those measured in the laboratory, and the model is then used to investigate the effect that the quantity and placement of gel refrigerant and the ambient temperature have on the period for which maximum food temperature can be maintained below 5°C and 8°C. Results indicate that it is possible to maintain chilled food below these temperatures for up to 24 h, though this period is dependent upon ambient temperature, the manner in which the refrigerant is wrapped around the food and the position of a food item inside the box.