• Energy Research
• 12. Responsible consumption close
• US close
• IT close
• BE close

Coupling between the UEDGE (edge fluid model), GINGRED (grid generation) and CAKE (equilibrium reconstruction) codes opens the door for automated interpretative scrape-off-layer (SOL) analysis over entire discharges, providing information that is essential in efforts to couple the SOL to core transport codes. In this work, we utilize new developments in the autoUEDGE code (Izacard et al. 2018) to investigate the behavior of the DIII-D SOL during the temporal evolution of an edge-localized mode (ELM) cycle. Modeled temperature and density profiles in UEDGE are automatically matched to experimental measurements by iteratively and self-consistently adjusting transport coefficient profiles in the plasma edge. This analysis is completed over multiple ELM cycles of a well-diagnosed discharge with long (∼100ms) inter-ELM periods. Directly after the ELM crash, a short period of high-density, low-temperature conditions is observed in Langmuir probe measurements at the outer divertor. This regime is associated with enhanced Dαemission and incident particle flux, suggesting that the divertor enters a period of high recycling after an ELM crash. After about ∼25ms, divertor conditions return to their pre-ELM conditions and remain there for several tens of milliseconds. Using the autoUEDGE code, the SOL is modeled as a function of ELM cycle using upstream profiles as input. The 2D modeling successfully reproduces both divertor Thomson scattering measurements and the experimentally observed divertor dynamics. Though the recycling is kept fixed throughout the modeling, changes in particle fluxes are consistent with local experimental recycling changes induced by ELMs. Agreement between modeling and observation suggests a strong link between upstream profiles and the high-recycling divertor conditions directly following large type-I ELMs.

The incorporation of cover crops into the maize (Zea mays L.)-soybean [Glycine max (L.) Merr.] rotation in the U.S. upper Midwest may improve sustainability. Long, cold winters in the region make identifying successful cover crop species and management practices a challenge. Two experiments were conducted in Minnesota, USA from fall 2016 through spring 2019 to examine the effect of cover crops interseeded at four- to six-leaf collar (early-interseeded) and dent to physiological maturity (late-interseeded) on biomass and grain yield of maize. Annual ryegrass (Lolium multiflorum L.) and cereal rye (Secale cereale L.) were evaluated as monocultures and in mixtures with crimson clover (Trifolium incarnatum L.) and forage radish (Raphanus sativus L.). Differences in canopy cover and biomass of late-interseeded cover crops were observed at the southernmost location in 2018. Additional accumulated growing-degree days in fall 2018 did not translate into increased cover crop canopy coverage of late-interseeded cover crops. Differences in cover crop canopy cover and biomass of early-interseeded cover crops were observed by fall frost at all locations in 2017 and at the northernmost location in 2018. Cover crop canopy cover and biomass at termination before planting maize, soil moisture at maize planting as well as maize aboveground biomass and yield were not affected by spring cereal rye regrowth of cover crops late-interseeded the previous year. Similarly, early-interseeded cover crops did not affect maize aboveground biomass or yield. We attribute these results to limited cover crop growth. This highlights the potential of a variety of cover crop strategies interseeded into maize in the U.S. upper Midwest; however, efforts to fine-tuning cover crop management and weather conditions are needed to benefit from such practice.

Abstract This literature review was built upon recently published articles on Life Cycle Assessments (LCAs) of agricultural biogas plants, to: enhance understanding of the relevant literature in the field and the related question by readers worldwide. It was designed to highlight methodological issues and impact indicators, which best represent this research field; consequently, they should be considered in performing environmental assessments of agro-biogas derived energy systems. The literature review highlighted the wide variability of environmental results due to the ways the feedstock mixtures were produced, managed, and supplied; and due to the regions in which the anaerobic digesters were located and operated. Differences were found to be related to the aim and function of the study and to the methodological approach used, especially for the development of the environmental impact assessments. Other differences resulted from the ways the energy produced was utilised, whether it was used as an input to the natural gas national grid, and/or if it was used within the production system. The authors of this review concluded that, although much progress has been made, many unsolved challenges and methodological choices must be addressed to further improve the robustness of LCA in relation to AD and to related approaches.

<abstract> <p>Fish is a key component of Nigeria's protein supply, making up about 40% of the nation's protein intake and considerably aiding in the achievement of the second Sustainable Development Goal of feeding the expanding population. Despite its importance, Nigeria's fish production and supply cannot keep up with demand. While total fish output has increased from 1,073,059 tonnes in 2014 to 1,169,000 tonnes in 2018 and is expected to reach 1,275,000 tonnes by 2030, there is a great supply gap. Fish production not only affects food security but also the national economy and employment. Notwithstanding, the fisheries sub-sector suffers several difficulties, such as poor management, a deficient fisheries policy, overfishing, diminishing catch, and a lack of technical know-how among fish growers and fishermen. Thus, exploring untapped aquaculture potential and managing small-scale fisheries effectively are necessary to close the gap between the demand for and supply of fish. The fish output situation can be improved by enforcing fisheries policy and regulations, increasing investments in ethical fisheries and aquaculture, and providing sufficient training for fish farmers and fisherfolk. To reduce waste associated with the limited number of fish now produced, post-harvest losses must also be addressed. By solving these issues and putting in place the necessary actions, Nigeria can increase its fish production, strengthen its food security, and accomplish the sustainable development goals in its evolving blue economy.</p> </abstract>

From the comparison of regulations and/or standards for the organic, conventional and/or integrated citrus production method and a voluntary certification, it emerges that farms certified with voluntary non-regulated certification systems, such as the IFA FV GLOBALG.A.P, are obliged to take into account the highest number of aspects, reported in a more complete register, than the organic ones. Moreover, this is also supported by a continuous-time planned process of revision and updating of the applicable versions of the standard. The environmental impact of the food production, the safety aspects of food products, as well as the health, ethics, and safety aspects of workers, are largely considered and inspected in the GLOBALG.A.P., while the organic system, despite the IFOAM suggestions and indications, is only considered partially. This means that, from a practical point of view, the organic product can be considered “clean and safe”, but not more environmentally friendly than the GLOBALG.A.P. products.

This study evaluated the efficacy of enzyme induced calcite precipitation (EICP) in restricting the mobility of heavy metals in soils. EICP is an environmentally friendly method that has wide ranging applications in the sustainable development of civil infrastructure. The study examined the desorption of three heavy metals from treated and untreated soils using ethylene diamine tetra-acetic acid (EDTA) and citric acid (C6H8O7) extractants under harsh conditions. Two natural soils spiked with cadmium (Cd), nickel (Ni), and lead (Pb) were studied in this research. The soils were treated with three types of enzyme solutions (ESs) to achieve EICP. A combination of urea of one molarity (M), 0.67 M calcium chloride, and urease enzyme (3 g/L) was mixed in deionized (DI) water to prepare enzyme solution 1 (ES1); non-fat milk powder (4 g/L) was added to ES1 to prepare enzyme solution 2 (ES2); and 0.37 M urea, 0.25 M calcium chloride, 0.85 g/L urease enzyme, and 4 g/L non-fat milk powder were mixed in DI water to prepare enzyme solution 3 (ES3). Ni, Cd, and Pb were added with load ratios of 50 and 100 mg/kg to both untreated and treated soils to study the effect of EICP on desorption rates of the heavy metals from soil. Desorption studies were performed after a curing period of 40 days. The curing period started after the soil samples were spiked with heavy metals. Soils treated with ESs were spiked with heavy metals after a curing period of 21 days and then further cured for 40 days. The amount of CaCO3 precipitated in the soil by the ESs was quantified using a gravimetric acid digestion test, which related the desorption of heavy metals to the amount of precipitated CaCO3. The order of desorption was as follows: Cd > Ni > Pb. It was observed that the average maximum removal efficiency of the untreated soil samples (irrespective of the load ratio and contaminants) was approximately 48% when extracted by EDTA and 46% when extracted by citric acid. The soil samples treated with ES2 exhibited average maximum removal efficiencies of 19% and 10% when extracted by EDTA and citric acid, respectively. It was observed that ES2 precipitated a maximum amount of calcium carbonate (CaCO3) when compared to ES1 and ES3 and retained the maximum amount of heavy metals in the soil by forming a CaCO3 shield on the heavy metals, thus decreasing their mobility. An approximate improvement of 30% in the retention of heavy metal ions was observed in soils treated with ESs when compared to untreated soil samples. Therefore, the study suggests that ESs can be an effective alternative in the remediation of soils contaminated with heavy metal ions.

Coastal communities in the Coral Triangle are increasingly threatened by climate change. Sea-level rise (SLR) will result in biophysical and socioeconomic impacts that could increase the loss of livelihoods, cultural heritage and infrastructure. Effective adaptation requires a holistic approach that incorporates scientific knowledge together with local and traditional knowledge. Community-based adaptation built on local knowledge is of great value for environmental management, particularly when scientific data are lacking. This article reports a case study that integrated traditional and scientific knowledge using participatory three-dimensional modeling (P3DM) in BoeBoe village, Solomon Islands. P3DM is a process by which members of the local community build a physical terrain model and overlay it with the location of important resources such as protected areas or harvesting sites. Additionally, SLR inundation scenarios based on surveyed elevations were incorporated into a geographic information system (GIS), allowing for a real-time integration of science with local knowledge. Despite discrepancies in scales and accuracy, information from both the P3DM and GIS were complementary. The process, itself, provided a forum for discussion between many members of the village who would normally not be involved and highlighted the importance of community engagement when building capacity for adaptation to climate change.

Abstract Against the background of an increasing global demand for bio-energy, the need for sustainability standards and a certification system ensuring sustainable production and trade has grown rapidly. Nevertheless, there is currently no specific forum for discussions on how to deal with biomass trade at the multilateral level. Distortions in agricultural and energy trade regimes, the myriad of standards and the lack of a clear biomass classification in the multilateral trade regime suggest that bio-energy products may not deliver sustainable development gains for all trading partners. This paper analyses then the global impact of bio-energy policies on biomass production and trade, paying particular attention to sustainable development in the bio-energy sector. It examines how a possible reduction and elimination of trade barriers as well as a phasing out of trade distorting support measures would contribute to the development of a global sustainable bio-energy market.