• Energy Research
• Closed Access close
• Restricted close
• US close
• IT close
• Applied Energy close

Abstract Microorganisms used in syngas fermentation require nutrients to grow and convert syngas (CO, H2 and CO2) into various products. Many of the essential nutrients can be provided by biochar. Poultry litter biochar (PLBC) contains minerals and trace metals and has a high pH buffering capacity, making it suitable as a nutrient supplement. The effects of PLBC loadings from 1 to 20 g L−1 on syngas fermentation were determined in 250 ml bottle assays. Results showed that 10 and 20 g L−1 PLBC significantly increased ethanol production compared to standard yeast extract (YE) medium. Fermentations in a 3L continuous stirred tank reactor (CSTR) with 10 g L−1 PLBC with and without 4-morpholineethanesulfonic acid (MES) showed 64% and 36% more ethanol production, respectively, than standard medium. The acetic acid accumulated at the beginning of fermentation was completely converted to ethanol in all media tested in the CSTR. These results demonstrate the feasibility of using PLBC medium without costly MES in the CSTR to enhance ethanol production from syngas for potential use at commercial scale.

Abstract This paper presents a novel multi-time-stage input–output-based modeling framework for simulating the dynamics of bioenergy supply chains. One of the key assumptions used in the model is that the production level at the next time-stage of each segment of the energy supply chain adjusts to the output surplus or deficit relative to targets at the current time period. Furthermore, unlike conventional input–output models, the technology matrix in this approach need not be square, and thus can include coefficients denoting flows of environmental goods, such as natural resources or pollutants. Introducing a feedback control term enables the system to regulate the dynamics, thus extending the model further. This is an important feature since the uncontrolled dynamic model exhibits oscillatory or unstable behavior under some conditions; in principle, the control term allows such undesirable characteristics to be suppressed. Numerical simulations of a simple, two-sector case study are given to illustrate dynamic behavior under different scenarios. Although the case study uses only a hypothetical system, preliminary comparisons are made between the simulation results and some broad trends seen in real bioenergy systems. Finally, some of the main policy implications of the model are discussed based on the general dynamic characteristics seen in the case study. In particular, insights from control theory can be used to develop policy interventions to impart desirable dynamic characteristics to nascent or emerging biofuel supply chains. These interventions can be used to guide the growth of bioenergy supplies along final demand trajectories with minimal fluctuation and no instability.

Abstract Economically harvesting energy from a microbial fuel cell (MFC), increasing its electrical power production, and developing its role as a practical energy supply, needs a low-cost and high-performance design of the MFC compartments. According to this strategy, a novel monolithic membrane electrode assembly (MEA) was fabricated and evaluated as an air–cathode in a single-chamber MFC (SCMFC). The MEA was made of bacterial cellulose (BC), conductive multi-walled carbon nanotubes (CNT), and nano-zycosil (NZ). BC, as a nano-celluloses with oxygen barrier property, can maintain anaerobic conditions for the anode compartment. Binder-less CNT coating on BC avoids costly binders such as poly-tetra fluoro ethylene (PTFE) and Nafion and decreases the MEA charge transfer resistance. NZ, as a very cheap modifier, not only prevents the anolyte leakage but also provides more MEA’s active sites for the oxygen reduction reaction (ORR). The electrochemical performance of the MEA was compared to a PTFE- based gas diffusion electrode (GDE) in the SCMFC. The MEA cell provided a pulse power density of 1790 mW/m2, roughly twice as high as the pulse power density of GDE (920 mW/m2). SCMFC’s internal resistance decreased from 1.84 KΩ (with GDE) to 0.8 KΩ (with MEA). Also, the cell’s columbic efficiency increased from 4.2% (with GDE) to11.7% (with MEA). Additionally, the capacitance of the MEA (65 mF) was much higher than the value for GDE (0.73 mF). Thus, the MEA compared to the GDE showed higher performance in the SCMFC for electricity generation and wastewater treatment at a lower cost.

Abstract In Concentrated Solar Power Plants, steam turbines controlled with standard Proportional Integrative Derivative (PID) methods may suffer from performance downgrading in power generation when the steam conditions deviate from nominal ones. An enhancement of standard steam turbine controller can be the key to achieve optimal performance also in non-nominal steam conditions. This paper presents the improvement of the PID control concept by exploiting Fuzzy Logic, an artificial intelligence technique that allows taking into account the human experience and knowledge on the system behavior. A real Concentrated Solar Power Plant has been modeled focusing on generated power control loop, its stability and performance analysis, knowledge useful to design a Fuzzy Inference System. A fuzzy logic controller is proposed to continuously adapt the PID parameters, to improve the steam turbine governor action. Its performance is compared to the classical PID tuned according to three different approaches. The fuzzy logic PID controller extends the simplicity of PID and adapts the control action to actual operating condition by providing the system with a sort of “decision-making skill”. The possibility to design implementable algorithms on a Programmable Logic Controller, which have stringent computational speed and memory requirements, has been explicitly taken into account in the developed work, through the minimization of the controller complexity with a reduced number of fuzzy sets and fuzzy rules within the fuzzy inference system.

Abstract Wind power technology is one of the cleanest electricity generation technologies that are expected to have a substantial share in the future electricity mix. Nonetheless, the expected increase in the market share of wind technology has led to an increasing concern of the availability, production capacity and geographical concentration of the metals required for the technology, especially the rear earth elements (REE) neodymium (Nd) and the far less abundant dysprosium (Dy), and the impacts associated with their production. Moreover, Nd and Dy are coproduced with other rare earth metals mainly from iron, titanium, zirconium, and thorium deposits. Consequently, an increase in the demand for Nd and Dy in wind power technology and in their traditional applications may lead to an increase in the production of the host metals and other companion REE, with possible implications on their supply and demand. In this regard, we have used a dynamic material flow and stock model to study the impacts of the increasing demand for Nd and Dy on the supply and demand of the host metals and other companion REE. In one scenario, when the supply of Dy is covered by all current and expected producing deposits, the increase in the demand for Dy leads to an oversupply of 255 Gg of total REE and an oversupply of the coproduced REE Nd, La, Ce and Y. In the second and third scenarios, however, when the supply of Dy is covered by critical REE rich deposits or Dy rich deposits, the increase in Dy demand results in an oversupply of Ce and Y only, while the demand for Nd and La exceeds their supply. In the case of an oversupply of REEs, the environmental impacts associated with the REEs production should be allocated to Dy and consequently to the technologies that utilize the metal. The results also show that very large quantities of thorium will be co-produced as a result of the demand for Dy. The thorium would need to be carefully disposed of, or significant thorium applications would need to be found.

Abstract Radiation energy transfer is modeled as the enthalpy flux of photons across the boundary of a thermodynamic system. It is proved that this energy transfer process can be treated as heat transfer. Compression work must be applied to the system to push the photons out. The energy transfer rate and maximum conversion efficiency computed from the model are identical to those determined from the Stefan–Boltzmann law and the Carnot efficiency for blackbody radiation.

Abstract As interest in the distributed generation of solar power system in a building facade continues to increase, its technical performance (i.e. the amount of electricity generation) should be carefully investigated before its implementation. In this regard, this study aimed to develop the nine-node-based finite element model for estimating the technical performance of the distributed generation of solar power system in a building facade (FEM9-node), focusing on the improvement of the prediction performance. The developed model (FEM9-node) was proven to be superior to the four-node-based model (FEM4-node), which was developed in the previous study, in terms of both prediction accuracy and standard deviation. In other words, the prediction accuracy (3.55%) and standard deviation (2.93%) of the developed model (FEM9-node) was determined to be superior to those of the previous model (FEM4-node) (i.e. 4.54% and 4.39%, respectively). The practical application was carried out to enable a decision maker (e.g. construction manager, facility manager) to understand how the developed model works in a clear way. It is expected that the developed model (FEM9-node) can be used in the early design phase in an easy way within a short time. In addition, it could be extended to any other countries in a global environment.

Abstract Based on the periodic solution of the heat conduction equation, an analysis has been developed to study the thermal performance of a simple domestic solar water-heating system consisting of a thermal-trap solar-energy collector, connected to a water tank. To study the effects of typical parameters such as the thickness of the trap material and the presence/absence of the glass cover on the thermal performance, numerical calculations have been performed to correspond to the daily variations of the ambient temperature and solar intensity on a typical cold winter day in New Delhi.

Abstract Microalgae have reported to be one of the most promising feedstock for biofuel production. However, microalgal cultivation for biofuel production is a costly process due to the large amounts of water, inorganic nutrients (mainly N and phosphate (P)), and CO2 needed. In this study, we evaluated whether the nutrient-rich ash and flue gas generated in biomass power plants could serve as a nutrient source for Chlorella sp. C2 cultivation to produce biolipids in a cost-efficient manner. When ash was incorporated in the culture medium and photosynthesis was enhanced by CO2 from flue gas, Chlorella cultures produced a lipid productivity of 99.11 mg L−1 d−1 and a biomass productivity of 0.31 g L−1 d−1, which are 39% and 35% more than the control cultures grown in BG11 medium. Additionally, the cultures reduced the nitrogen oxide (NOx) present in the flue gas and sequestered CO2, with a maximum ash denutrition rate of 13.33 g L−1 d−1, a NOx reduction (DeNOx) efficiency of ∼ 100%, and a CO2 sequestration rate of 0.46 g L−1 d−1. The residual medium was almost nutrient-free and suitable for recycling for continuous microalgal cultivation or farmland watering, or safely disposed off. Based on these results, we propose a technical strategy for biomass power plants in which the industrial wastes released during power generation nourish the microorganisms used to produce biofuel. Implementation of this strategy would enable carbon negative bioenergy production and impart significant environmental benefits.