• Energy Research
• Restricted close
• Open Source close
• Embargo close
• NL close
• US close

Abstract Thermal energy storage (TES) will improve the efficiency and output of solar power plants. TES based on thermochemical cycles is an interesting option as thermochemical cycles can provide high energy storage densities and allow longer heat storage time. The use of multivalent solid oxide reduction–oxidation (REDOX) reactions for thermochemical heat storage is a promising option. Several concepts are feasible for coupling solar energy to the redox reaction. Among those a directly irradiated rotary kiln is one of the most interesting because it is able to provide high mass flow rates and high amounts of active material. A solar-heated rotary kiln was set-up and operated in the solar furnace of DLR for thermal reduction and oxidation of cobalt oxide. The redox material was fed into the reactor batch wise and reduced on-sun at temperatures of about 900 °C and re-oxidized off-sun in the same rotary kiln. Both steps were carried out in an air atmosphere. Thirty cycles were performed with one batch showing no evident degradation of the material. The results confirm that the rotary kiln is a feasible reactor set-up for the solar reduction of metal oxides and, hence, for thermochemical energy storage.

The potential for global forest cover The restoration of forested land at a global scale could help capture atmospheric carbon and mitigate climate change. Bastin et al. used direct measurements of forest cover to generate a model of forest restoration potential across the globe (see the Perspective by Chazdon and Brancalion). Their spatially explicit maps show how much additional tree cover could exist outside of existing forests and agricultural and urban land. Ecosystems could support an additional 0.9 billion hectares of continuous forest. This would represent a greater than 25% increase in forested area, including more than 200 gigatonnes of additional carbon at maturity.Such a change has the potential to store an equivalent of 25% of the current atmospheric carbon pool. Science , this issue p. 76 ; see also p. 24

Artículos en revistas Numerical models of transmission-constrained electricity markets are used to inform regulatory decisions. How robust are their results? Three research groups used the same data set for the northwest Europe power market as input for their models. Under competitive conditions, the results coincide, but in the Cournot case, the predicted prices differed significantly. The Cournot equilibria are highly sensitive to assumptions about market design (whether timing of generation and transmission decisions is sequential or integrated) and expectations of generators regarding how their decisions affect transmission prices and fringe generation. These sensitivities are qualitatively similar to those predicted by a simple two-node model. info:eu-repo/semantics/publishedVersion

Abstract Both steady-state AC and DC power flow models are commonly used for techno-economic studies of power systems. The DC-based approach limits the computational burden by assuming small-angle approximation, ignoring power losses, reactive power flows, and voltage variations. It, therefore, matters to understand if this approach affects system vulnerability, reliability, and contingency assessments. To this aim, we use the time-sequential Monte Carlo simulation and an N-k′-1 scenario for reliability and contingency analyses, respectively. Further, we introduce a new index for vulnerability assessment. The IEEE reliability test system (RTS) and the modified RTS are modeled. The results show that the DC model underestimates the reliability indices by about 20% and more than 90% in a stressed network. We also show a small error of 5%, owing to the assumptions of the DC model, which can lead to inaccurate simulations concerning the cascading failures. Finally, the sources of the inaccuracy in the DC-based model are investigated. The results prove that AC power flow model should be privileged for the line capacity-based assessments.

Domestic heating represents the most dominant energy function in Dutch households nowadays. Using district heat from CHP (combined heat and power) by means of a NGCC (natural gas-fired combined cycle) plants is generally acknowledged as an effective option to reduce primary energy consumption for heating. However, methods to calculate energy savings from CHP differ widely. This paper compares a number of different methods, including the method from the EU CHP Directive, to estimate primary energy savings in comparison with the typically used domestic gas-fired condensing boiler. Real hourly CHP plant performance data is used. An estimation of the CO2 mitigation cost of delivering district heat to Dutch dwellings is made. We find that supplying dwellings with district heat from an NGCC-CHP saves energy, regardless of the calculation method and for a rather wide range of reference efficiencies. CO2 mitigation costs are acceptable from a social perspective (at discount rates up to 4%, excluding fuel taxes) and negative from a private perspective (at discount rates up to 10%, including fuel taxes).

Objective: BeweegKuur (Exercise Therapy) is a Dutch lifestyle programme in which participants are referred by a general practitioner (GP) to a lifestyle advisor. To support participants, regional and local alliances are established. The present study explored the successes and challenges associated with collaboration processes in local BeweegKuur alliances. Design: A qualitative explorative study. Setting: The Netherlands Institute for Sports and Physical Activity (NISB) initiated the Building BeweegKuur Alliances project to support local alliances. The BeweegKuur intervention is implemented by over 30 regional and about 150 local alliances throughout the Netherlands. Method: 12 in-depth interviews were held with coordinators of the alliances, and four focus groups were held with regional and local alliance partners. Results: Collaboration within the alliances is perceived as successful in integrating prevention and care. Challenges include the participation of sectors such as the local municipality and the sports sector, and the transition of BeweegKuur participants to local sports facilities. Conclusion: This study identifies three general conditions for successful coordinated action: (a) flexible protocols and management that allow for contextual adaptations; (b) making successes and challenges visible using facilitating methods and tools; and (c) time and funding to overcome differences of culture between different sectors, and to build trust.

AbstractAlthough canopy height has long been a focus of interest in ecology, it has remained difficult to study at large spatial scales. Recently, satellite‐borne LiDAR equipment produced the first systematic high resolution maps of vegetation height worldwide. Here we show that this new resource reveals three marked modes in tropical canopy height ~40, ~12, and ~2 m corresponding to forest, savanna, and treeless landscapes. The distribution of these modes is consistent with the often hypothesized forest‐savanna bistability and suggests that both states can be stable in areas with a mean annual precipitation between ~1,500 and ~2,000 mm. Although the canopy height states correspond largely to the much discussed tree cover states, there are differences, too. For instance, there are places with savanna‐like sparse tree cover that have a forest‐like high canopy, suggesting that rather than true savanna, those are thinned relicts of forest. This illustrates how complementary sets of remotely sensed indicators may provide increasingly sophisticated ways to study ecological phenomena at a global scale.