• Energy Research
• 6. Clean water close
• 9. Industry and infrastructure close
• US close
• SA close
• Sustainability close

The growing population and increasing urbanization have led to a surge in domestic wastewater generation, posing significant challenges for effective and sustainable treatment. The present study demonstrates a novel and sustainable approach for the onsite treatment of domestic wastewater using an integrated settler-based biofilm reactor (ISBR) with efficient biogas generation. The ISBR provides an optimized environment for the growth of biofilm, facilitating the removal of organic pollutants and pathogens. Moreover, the ISBR enables the recovery of a valuable resource in the form of biogas, thus enhancing the overall utility of the treatment process. The performance of the ISBR was comprehensively evaluated at laboratory scale through treating the actual domestic wastewater generated from the hostel of Manipal University Jaipur. The ISBR system was operated under an ambient environment at a hydraulic retention time (HRT) of 24 h. The results demonstrated remarkable efficiency in terms of chemical oxygen demand (COD), total suspended solids (TSS), and coliforms removal, with average removal efficiency being more than 90%. According to the COD mass balance analysis, 48.2% of the influent COD was recovered as bioenergy. The chromatogram revealed a high percentage of methane gas in the collected biogas sample. The field emission scanning electron microscope (FESEM) analysis of the accumulated sludge in the ISBR system depicted the morphology of methanogenic bacteria. Both the experimental and theoretical results confirmed the feasibility and sustainability of the ISBR system at the onsite level.

Petroleum oil pollution is a worldwide problem that results from the continuous exploration, production, and consumption of oil and its products. Petroleum hydrocarbons are produced as a result of natural or anthropogenic practices, and their common source is anthropogenic activities, which impose adverse effects on the ecosystem’s nonliving and living components including humans. Phytoremediation of petroleum hydrocarbon-polluted soils is an evolving, low-cost, and effective alternative technology to most traditional remediation methods. The objective of this study is to evaluate the phytoremediation potentiality of Vinca rosea for crude oil-contaminated soil by understanding its properties and involvement in the enhanced degradation of crude oil. The remediation potentiality was determined by evaluating the total petroleum hydrocarbon degradation percentage (TPH%) and changes in the molecular type composition of saturated and aromatic hydrocarbon fractions. TPH% was estimated gravimetrically, and changes in the molecular type composition of saturated and aromatic fractions were measured using gas chromatography and high-performance liquid chromatography, respectively. Sulfur concentration was measured using X-ray fluorescence. Cadmium and lead quantification was measured using Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES). The results revealed that V. rosea enhanced total petroleum hydrocarbon (TPH) degradation and altered the molecular composition of the crude oil. The saturated hydrocarbons increased and the aromatic hydrocarbons decreased. The saturated hydrocarbon fraction in the crude oil showed a wider spectrum of n-paraffin peaks than the oil extracted from unplanted and V. rosea-planted soils. Polyaromatic hydrocarbon degradation was enhanced in the presence of V. rosea, which was reflected in the increase of monoaromatic and diaromatic constituents. This was parallel to the increased sulfur levels in planted soil. The determination of sulfur and heavy metal content in plant organs indicated that V. rosea can extract and accumulate high amounts from polluted soils. The ability of V. rosea to degrade TPH and alter the composition of crude petroleum oil by decreasing the toxicity of polyaromatic hydrocarbons in soil, as well as its capability to absorb and accumulate sulfur and heavy metals, supports the use of plant species for the phytoremediation of crude oil-polluted sites.

Management of natural resources is pivotal for sustained economic growth—the increasing ecological footprints causing biocapacity deficit threaten the resource conversation agenda. The study identified the potential causes and consequences of natural resource depletion in a broad cross-section of 138 countries. Ecological footprints, international migrant stocks, industrial value-added, and population growth influenced natural resource capital across countries. The results show that ecological footprints, industrial value-added, and population growth are the detrimental factors of resource capital. In contrast, continued economic growth is helpful to conserve natural resources for future generations. The rise and fall in the natural resource degradation are evident in the wake of international migrants’ stocks to support an inverted U-shaped relationship between them. The Granger causality inferences confirmed the one-way linkages, running from international migrant stocks, economic growth, and population growth to natural resource degradation. It verifies migrants-led, affluence-led, and population-led resource degradation. Ecological footprints Granger causes industrial value-added across countries. The forecasting estimates suggested that economic growth would likely to influenced greater in magnitude to resource degradation by its innovation shocks of 4.791%, followed by international migrant stocks, population growth, ecological footprints, and industrial value added by their innovation shocks of 4.709%, 1.829%, 1.247%, and 0.700%, respectively. The study concludes that international migrant stocks should manage smartly, causing more resource degradation via a channel of increasing biocapacity deficit across countries.

It is known that organizations can gain a competitive advantage only by managing effectively for today, while simultaneously creating innovation for tomorrow, and sustainability is one of the innovative strategies in major architecture, engineering, and construction (AEC) organizations. Innovation is vital to AEC organizations’ growth, yet most do not have a comprehensive measurement of innovation performance. Similar to the balanced scorecard approach, key indicators should be identified for the measuring of innovation performance to facilitate management. This article presents a study by using a triangulation approach that integrates systematic literature reviews and two-step consultations with experienced senior professionals to compile a set of key indicators for innovation performance measures for the AEC Industry.

Cycles of boom and bust plague mining communities around the globe, and decades after the bust the skeletons of shrunken cities remain. This article evaluates strategies for how former mining communities cope and strive for sustainability in the decades well beyond the bust, using a case study of Calumet, Michigan. In 1910, Calumet was at the center of the mining industry in the Upper Peninsula of Michigan, but in the century since its peak, mining employment steadily declined until the last mine closed in 1968, and the population declined by over 80%. This paper explores challenges, opportunities, and progress toward sustainability associated with arts-related development in this context. Methods are mixed, including observation, interviews, document review, a survey, and secondary data analysis. We follow Flora and Flora’s Community Capitals Framework to analyze progress toward sustainability. Despite key challenges associated with the shrunken city context (degraded tax base, overbuilt and aging infrastructure, diminished human capital, and a rather limited set of volunteers and political actors), we find the shrunken city also offers advantages for arts development, including low rents, less risk of gentrification, access to space, and political incentive. In Calumet, we see evidence of a spiraling up pattern toward social sustainability resulting from arts development; however impacts on environmental and economic sustainability are limited.

Soil conditioners have shown benefits in the reduction of soil erosion. A concomitant application of gypsum and polyacrylamide promotes aggregate stability and reduces the amount of runoff discharge and soil losses. Synthetic gypsum produced from flue gas desulfurization (FGD) at coalfired power plants has the potential to serve as a more sustainable source for the agricultural application of this soil conditioner. Upcycling of FGD gypsum into a pellet of a mixture of ground FGD gypsum and polyacrylamide (PAM) was compared to other types of soil surface application methods. Results confirm that surface application of PAM and FGD gypsum reduced soil erosion. Depending on the type of application method, addition of PAM and FGD gypsum presented different effects on the local hydrological processes and microtopography. Though PAM in solution acts as a physical net on the soil surface, the amount of water needed for its application makes it impractical for agricultural fields. Granular application of PAM and FGD gypsum, as well as pellets (upcycled product) has been shown to have a delayed effect in reducing soil erosion, as these methods required PAM particles to be activated. The upcycled product of FGD gypsum and PAM in the form of pellets demonstrates that the sudden expansion of the pellets due to PAM hydration results in the rapid release of the gypsum grains, providing a better treatment on the soil surface. Moreover, the increased surface area of PAM and gypsum due to the grinding is advantageous for a more rapid activation of the soil conditioners. The upcycled product of FGD gypsum and PAM is a practical application method that could be adapted by farmers to be used at field scale.

One effective method to minimize the increasing cost in the construction industry is by using coal bottom ash waste as a substitute material. The high volume of coal bottom ash waste generated each year and the improper disposal methods have raised a grave pollution concern because of the harmful impact of the waste on the environment and human health. Recycling coal bottom ash is an effective way to reduce the problems associated with its disposal. This paper reviews the current physical and chemical and utilization of coal bottom ash as a substitute material in the construction industry. The main objective of this review is to highlight the potential of recycling bottom ash in the field of civil construction. This review encourages and promotes effective recycling of coal bottom ash and identifies the vast range of coal bottom ash applications in the construction industry.