• Energy Research
• Open Source close
• Embargo close
• 7. Clean energy close
• 15. Life on land close
• 12. Responsible consumption close
• US close

The lifetime and reliability of power transformers are primarily dependent on the hot-spot temperature in the windings, as temperature is the most important factor determining the insulation degradation rate. Key to removing the heat from the transformer is the radiator which must be carefully designed to keep the temperatures within limits under all operating conditions whilst minimizing the transformer size, weight and cost. This paper compares the analytical method used to predict the radiator performance with computational fluid dynamics (CFD) models in terms of heat dissipation. It is found that the analytical method and CFD models give similar results in the air natural (AN) cooling modes, whereas the analytical method overestimates the heat dissipation in the air forced (AF) cooling modes. Moreover, the thermal conduction effect in the radiator wall is investigated under different operating conditions and for different radiator sizes using the CFD models. The simulation results indicate that the radiator wall contributes to 6%-10% of the total heat dissipation under some circumstances and therefore should not be simply ignored in radiator models.

Revolutionary catalyst protection by single layer graphene capping, tremendous catalyst lifetime longevity and activity enhancement towards oxygen reduction reaction.

National net zero emission targets could, if fully implemented, reduce best estimates of projected global average temperature increase to 2.0–2.4 °C by 2100, bringing the Paris Agreement temperature goal within reach. A total of 131 countries are discussing, have announced or have adopted net zero targets, covering 72% of global emissions. These targets could substantially lower projected warming as compared to currently implemented policies (2.9–3.2 °C) or pledges submitted to the Paris Agreement (2.4–2.9 °C). Current pledges for emissions cuts are insufficient to meet the Paris Agreement temperature goal. The wave of net zero targets being discussed and adopted could make the Paris goal possible if further countries follow suit.

Moisture availability is a strong determinant of decomposition rates in forests worldwide. Climate models suggest that many terrestrial ecosystems are at risk from future droughts, suggesting moisture limiting conditions will develop across a range of forests worldwide. The impacts of increasing drought conditions on forest carbon (C) fluxes due to shifts in organic matter decay rates may be poorly characterised due to limited experimental research. To appraise this question, we conducted a meta-analysis of forest drought experiment studies worldwide, examining spatial limits, knowledge gaps and potential biases. To identify limits to experimental knowledge, we projected the global distribution of forest drought experiments against spatially modelled estimates of (i) future precipitation change, (ii) ecosystem total above-ground C and (iii) soil C storage. Our assessment, involving 115 individual experimental study locations, found a mismatch between the distribution of forest drought experiments and regions with higher levels of future drought risk and C storage, such as Central America, Amazonia, the Atlantic Forest of Brazil, equatorial Africa and Indonesia. Decomposition rate responses in litter and soil were also relatively under-studied, with only 30 experiments specifically examining the potential experimental impacts of drought on C fluxes from soil or litter. We propose new approaches for engaging experimentally with forest drought research, utilising standardised protocols to appraise the impacts of drought on the C cycle, while targeting the most vulnerable and relevant forests.

Abstract This work focuses on the efforts being made by King County, Washington to respond to the challenges of global climate change, concentrating on both mitigation and adaptation. King County is a leader in the United States in the development and implementation of meaningful climate change efforts in local government. The county, in conjunction with ICLEI, recently produced a workbook on Preparing for Climate Change at the Local, Regional, and State levels. While the vast majority of local governments in the United States have only taken limited steps to respond to global warming, King County stands out as aggressively looking to move in a new direction. The King County Climate Plan is based on the conviction that climate change is both a problem and an opportunity for communities to improve environmental quality through mitigation of greenhouse gases and simultaneously build resilience to adapt to global climate change. Its exceptional combination of responsibilities in planning and opportunities makes this an invaluable experience to other local governments throughout the world. The work to be presented is a case study that examines the underlying issues and challenges faced by this jurisdiction in adopting its climate change plan; the development and adoption of the plan; issues associated with monitoring and sustaining these efforts; and the broader challenges of building more resilient and adaptive communities. The case study will focus both on procedural issues, as well as, on the types of mitigation and adaptive responses. One aspect of the paper will examine King County's efforts to link climate change efforts/policy/plans to other critical community concerns (e.g., issues of equity and race), and to the economic opportunities that have become critical motivators to successfully as moving forward the county attempts to establish itself as a global leader in meeting the challenges of global climate change.

Studying the thermal performance of Double Skin Facades (DSFs) with vertical layers has dominated the literature,however, there is still a lack of in-depth research on the performance of DSFs with atypical geometries suchas folded cases which can be applied to Building Integrated Photovoltaic (BIPV) systems to improve their performance.To this end, the study evaluates the influence of the fold geometry on heat transfer, flow structure, andairflow rate in the Folded DSF cavities under a hot climate in Iran using an efficient method titled “patching”; themethod integrates Soltrace3 with a 2D steady-state CFD model by ANSYS-Fluent. The results show that the foldposition and its depth can alter the DSFs performance significantly; the higher the fold depth the more distortionof the flow field inside the cavity; from a practical perspective, the fold position in the upper part of the cavity issuitable for BIPVs application since it can capture 250% higher amount of solar radiation compared to a conventionalvertical-layer DSF as the Base Case; the net heat gain through outer layer could improve with increaseof fold depth and reach at least 33% higher than the Base Case, meanwhile, the total electricity generationpotential of folded cases could be up to 169% higher than the Base Case; thus, the study proved that if thearchitectural design is of interest, it is highly recommended to consider folded DSFs as a design option.

Gas-based power plants have attracted more attention in providing electrical energy worldwide because of their lower costs and air pollution. In addition, the use of multi-carrier energy systems has several advantages, such as sustainability benefits and improving performance in supplying the energy demand. This study aims to optimize the total operation cost of multi-carrier energy systems considering the uncertain parameters. The storage technology and consumption side assist the operator in achieving lower costs based on conceptions of demand response programs. Therefore, this study presents a comprehensive mathematical model for the coordinated operation of integrated multi-carrier energy systems while the operational constraints of both gas and power networks are considered. Furthermore, this paper utilizes a new uncertainty modeling method based on Hong's two-point estimate method for addressing the uncertainties of load consumption and wind generation. The proposed model is applied to a gas and power multi-carrier energy system through four case studies. The results affirm the high performance of the presented method and investigate the influence of demand response programs in both sides of energy carriers.