• Energy Research
• 7. Clean energy close
• 12. Responsible consumption close
• US close
• Bioresource Technology close

In this study, levulinic acid (LA) was produced from rice straw biomass in co-solvent biphasic reactor system consisting of hydrochloric acid and dichloromethane organic solvent. The modified protocol achieved a 15% wt LA yield through the synergistic effect of acid and acidic products (auto-catalysis) and the designed system allowed facile recovery of LA to the organic phase. Further purification of the resulting extractant was achieved through traditional column chromatography, which yielded a high purity LA product while recovering ∼85% wt. Upon charcoal treatment of the resultant fraction generated an industrial grade target molecule of ∼99% purity with ∼95% wt recovery. The system allows the solvent to be easily recovered, in excess of 90%, which was shown to be able to be recycled up to 5 runs without significant loss of final product concentrations. Overall, this system points to a method to significantly reduce manufacturing cost during large-scale LA preparation.

Ethanol is an attractive alternative fuel because it is a renewable bio-based resource and it is oxygenated, thereby providing the potential to reduce particulate emissions in compression-ignition engines. In this review the properties and specifications of ethanol blended with diesel fuel are discussed. Special emphasis is placed on the factors critical to the potential commercial use of these blends. These factors include blend properties such as stability, viscosity and lubricity, safety and materials compatibility. The effect of the fuel on engine performance, durability and emissions is also considered. The formulation of additives to correct certain key properties and maintain blend stability is suggested as a critical factor in ensuring fuel compatibility with engines. However, maintaining vehicle safety with these blends may entail fuel tank modifications. Further work is required in specifying acceptable fuel characteristics, confirming the long-term effects on engine durability, and ensuring safety in handling and storing ethanol-diesel blends.

The relationship between anode microbial characteristics and electrochemical parameters in microbial fuel cells (MFCs) was analyzed by time-course sampling of parallel single-bottle MFCs operated under identical conditions. While voltage stabilized within 4days, anode biofilms continued growing during the six-week operation. Viable cell density increased asymptotically, but membrane-compromised cells accumulated steadily from only 9% of total cells on day 3 to 52% at 6weeks. Electrochemical performance followed the viable cell trend, with a positive correlation for power density and an inverse correlation for anode charge transfer resistance. The biofilm architecture shifted from rod-shaped, dispersed cells to more filamentous structures, with the continuous detection of Geobacter sulfurreducens-like 16S rRNA fragments throughout operation and the emergence of a community member related to a known phenazine-producing Pseudomonas species. A drop in cathode open circuit potential between weeks two and three suggested that uncontrolled biofilm growth on the cathode deleteriously affects system performance.

To improve the lignocellulose conversion for ABE in high solids fermentation, this study explored the feasibility of cycling the process through the cellulolytic or/and solventogenic phases via intermittent flushing of the fermentation media. Five different flushing strategies (varying medium ingredients, inoculum supplement and cycling through phases) were investigated. Flushing regularly throughout the cellulolytic phase is necessary because re-incubation at 65 °C significantly improved glucose availability by at least 6-fold. The solvents accumulation was increased by 4-fold using corn stover (3-fold using miscanthus) over that produced by flushing only through the solventogenic phase. In addition, cycling process was simplified by re-incubating the flushed cellulolytic phase with no re-inoculation because the initial inoculum of Clostridiumthermocellum remained viable throughout sequential co-culture. This study served as the first proof of the cycling flush system applied in co-cultural SSC and the knowledge gained can be used to design a farm-scale flushing system.

In this work, corn stover subjected to ammonia fiber expansion (AFEX™)1 pretreatment or alkaline pre-extraction followed by hydrogen peroxide post-treatment (AHP pretreatment) were compared for their enzymatic hydrolysis yields over a range of solids loadings, enzymes loadings, and enzyme combinations. Process techno-economic models were compared for cellulosic ethanol production for a biorefinery that handles 2000tons per day of corn stover employing a centralized biorefinery approach with AHP or a de-centralized AFEX pretreatment followed by biomass densification feeding a centralized biorefinery. A techno-economic analysis (TEA) of these scenarios shows that the AFEX process resulted in the highest capital investment but also has the lowest minimum ethanol selling price (MESP) at $2.09/gal, primarily due to good energy integration and an efficient ammonia recovery system. The economics of AHP could be made more competitive if oxidant loadings were reduced and the alkali and sugar losses were also decreased.

The use of biological and thermochemical conversion (TCC) technologies in livestock waste-to-bioenergy treatments can provide livestock operators with multiple value-added, renewable energy products. These products can meet heating and power needs or serve as transportation fuels. The primary objective of this work is to present established and emerging energy conversion opportunities that can transform the treatment of livestock waste from a liability to a profit center. While biological production of methanol and hydrogen are in early research stages, anaerobic digestion is an established method of generating between 0.1 to 1.3m3m(-3)d(-1) of methane-rich biogas. The TCC processes of pyrolysis, direct liquefaction, and gasification can convert waste into gaseous fuels, combustible oils, and charcoal. Integration of biological and thermal-based conversion technologies in a farm-scale hybrid design by combining an algal CO2-fixation treatment requiring less than 27,000m2 of treatment area with the energy recovery component of wet gasification can drastically reduce CO2 emissions and efficiently recycle nutrients. These designs have the potential to make future large scale confined animal feeding operations sustainable and environmentally benign while generating on-farm renewable energy.

Two freshwater and two marine microalgae species were grown under nitrogen replete and deplete conditions evaluating the impact on total biomass yield and biomolecular fractions (i.e. starch, protein, and lipid). A life cycle assessment was performed to evaluate varying species/growth conditions considering each biomass fraction and final product substitution based on energy consumption, greenhouse gas emissions (GHG), and eutrophication potential. Lipid for biodiesel was assumed as the primary product. Protein and carbohydrate fractions were processed as co-products. Composition of the non-lipid fraction presented significant trade-offs among biogas production, animal feed substitution, nutrient recycling, and carbon sequestration. Maximizing total lipid productivity rather than lipid content yielded the least GHG emissions. A marine, N-deplete case with relatively low lipid productivity but effective nutrient recycling had the lowest eutrophication impacts. Tailoring algal species/growth conditions to optimize the mix of biomolecular fractions matched to desired products and co-products can enable a sustainable integrated microalgal biorefinery.

Pretreatment technologies that can not only reduce the recalcitrance of woody biomass but also achieve a high benefit-cost ratio are desirable for bioenergy production from woody biomass. In this study, an integrated process was proposed and conducted by pretreating woodchips via Shiitake cultivation for improved methane yield during solid-state anaerobic digestion (SS-AD), and simultaneously producing mushrooms as a high-value co-product. Shiitake cultivation using woodchips as the main substrate ingredient obtained mushroom yields comparable to those using a commercial substrate. Enzymatic digestibility and cumulative methane yields (133-160 L kg(-1)VS during 62 days of SS-AD) of pretreated substrates (spent mushroom substrate) were at least 1.5 times as high as those of untreated woodchips. Compared to a sole SS-AD process, the integrated Shiitake cultivation/SS-AD process increased methane production and solid waste reduction per kilogram of woodchips by about 1.5 and 8 times, respectively.