• Energy Research
• natural sciences close
• University of North Texas close

Reports in the Argonne National Laboratory Nuclear Data and Measurement Series present results of studies in the field of microscopic nuclear data. The primary objective of the series is the dissemination of information in the comprehensive form required for nuclear technology applications. This series is devoted to: (a) measured microscopic nuclear parameters, (b) experimental techniques and facilities employed in measurements, (c) the analysis, correlation and interpretation of nuclear data, and (d) the compilation and evaluation of nuclear data.

The goal of the first hohlraum energetics experiments on the National Ignition Facility (NIF) [G. H. Miller et al, Optical Eng. 43, 2841 (2004)] is to select the hohlraum design for the first ignition experiments. Sub-scale hohlraums heated by 96 of the 192 laser beams on the NIF are used to emulate the laser-plasma interaction behavior of ignition hohlraums. These 'plasma emulator' targets are 70% scale versions of the 1.05 MJ, 300 eV ignition hohlraum and have the same energy-density as the full-scale ignition designs. Radiation-hydrodynamics simulations show that the sub-scale target is a good emulator of plasma conditions inside the ignition hohlraum, reproducing density ne within 10% and temperature Te within 15% along a laser beam path. Linear backscatter gain analysis shows the backscatter risk to be comparable to that of the ignition target. A successful energetics campaign will allow the National Ignition Campaign to focus its efforts on optimizing ignition hohlraums with efficient laser coupling.

This editorial introduces readers and contributors to a new online journal. Through the publication of articles ranging from peer-reviewed research papers and short communications, to editorials and interviews on greenhouse gas emissions science and technology, this journal will disseminate research results and information that address the global crisis of anthropogenic climate change. The scope of the journal includes the full spectrum of research areas from capture and separation of greenhouse gases from flue gases and ambient air, to beneficial utilization, and to sequestration in deep geologic formations and terrestrial (plant and soil) systems, as well as policy and technoeconomic analyses of these approaches.

Ultrafast excited-state structural dynamics of [Cu(I)(dmp)(2)](+) (dmp = 2,9-dimethyl-1,10-phenanthroline) have been studied to identify structural origins of transient spectroscopic changes during the photoinduced metal-to-ligand charge-transfer (MLCT) transition that induces an electronic configuration change from Cu(I) (3d(10)) to Cu(II) (3d(9)). This study has important connections with the flattening of the Franck-Condon state tetrahedral geometry and the ligation of Cu(II)* with the solvent observed in the thermally equilibrated MLCT state by our previous laser-initiated time-resolved X-ray absorption spectroscopy (LITR-XAS) results. To better understand the structural photodynamics of Cu(I) complexes, we have studied both [Cu(I)(dmp)(2)](+) and [Cu(I)(dpp)(2)](+) (dpp = 2,9-diphenyl-1,10-phenanthroline) in solvents with different dielectric constants, viscosities, and thermal diffusivities by transient absorption spectroscopy. The observed spectral dynamics suggest that a solvent-independent inner-sphere relaxation process is occurring despite the large amplitude motions due to the flattening of the tetrahedral coordinated geometry. The singlet fluorescence dynamics of photoexcited [Cu(I)(dmp)(2)](+) were measured in the coordinating solvent acetonitrile, using the fluorescence upconversion method at different emission wavelengths. At the bluest emission wavelengths, a prompt fluorescence lifetime of 77 fs is attributed to the excited-state deactivation processes due to the internal conversion and intersystem crossing at the Franck-Condon state geometry. The differentiation between the prompt fluorescence lifetime with the tetrahedral Franck-Condon geometry and that with the flattened tetrahedral geometry uncovers an unexpected ultrafast flattening process in the MLCT state of [Cu(I)(dmp)(2)](+). These results provide guidance for future X-ray structural studies on ultrafast time scale, as well as for synthesis toward its applications in solar energy conversion.

Alumina aerogels were prepared through the addition of propylene oxide to aqueous or ethanolic solutions of hydrated aluminum salts, AlCl3·6H2O or Al(NO3)3·9H2O, followed by drying with supercritical CO2. This technique affords low-density (60−130 kg/m3), high-surface-area (600−700 m2/g) alumina aerogel monoliths without the use of alkoxide precursors. The dried alumina aerogels were characterized using elemental analysis, high-resolution transmission electron microscopy, powder X-ray diffraction, solid-state NMR, acoustic measurements, and nitrogen adsorption/desorption analysis. Powder X-ray diffraction and TEM analysis indicated that the aerogel prepared from hydrated AlCl3 in water or ethanol possessed microstructures containing highly reticulated networks of pseudoboehmite fibers, 2−5 nm in diameter and of varying lengths, whereas the aerogels prepared from hydrated Al(NO3)3 in ethanol were amorphous with microstructures comprised of interconnected spherical particles with diameters in the 5−15 nm ra...

A superconducting dipole magnet was installed in the Fermilab primary beam line. Targets were inserted in the proton beam upstream of the magnet and measurements made of the energy deposition within the magnet sufficient to cause quenching. The quench levels were 25 mW/g for 1 sec beam spill and 1 mJ/g for a spill of 1 msec or less. In comparison, the energy deposition at the extraction septum was 0.6 mJ/g.

Highly ionized plasmas are being considered as a medium for charge neutralizing heavy ion beams in order to focus beyond the space-charge limit. Calculations suggest that plasma at a density of 1–100 times the ion beam density and at a length ∼0.1–2 m would be suitable for achieving a high level of charge neutralization. An Electron Cyclotron Resonance (ECR) source has been built at the Princeton Plasma Physics Laboratory (PPPL) to support a joint Neutralized Transport Experiment (NTX) at the Lawrence Berkeley National Laboratory (LBNL) to study ion beam neutralization with plasma. The ECR source operates at 13.6 MHz and with solenoid magnetic fields of 1–10 gauss. The goal is to operate the source at pressures ∼10−6 Torr at full ionization. The initial operation of the source has been at pressures of 10−4–10−1 Torr. Electron densities in the range of 108 to 1011 cm−3 have been achieved. Low-pressure operation is important to reduce ion beam ionization. A cusp magnetic field has been installed to improve radial confinement and reduce the field strength on the beam axis. In addition, axial confinement is believed to be important to achieve lower-pressure operation. To further improve breakdown at low pressure, a weak electron source will be placed near the end of the ECR source. This article also describes the wave damping mechanisms. At moderate pressures (> 1 mTorr), the wave damping is collisional, and at low pressures (< 1 mTorr) there is a distinct electron cyclotron resonance.

This study was motivated by recent tests results showing that a 5cm i.d. low-swirl burner (LSB) stabilizes ultra-lean premixed turbulent flames up to 600kW. A parametric study has been performed to determine the optimum ultra-lean LSB configuration, i.e. one that will achieve low NOx and flame stability, for thermal input between 15kW to 150kW. Using Laser Doppler Velocimetry (LDV), non-reacting centerline velocity and rms fluctuation profiles were measured, and were found to show self-similar behavior. This self-similarity may explain why the flame remains stationary relative to the burner exit despite a change in bulk flow velocity from 5 to 90m/s. The recess distance of the swirler affects the shape of the mean and rms velocity profiles. Lean blow-off limits were also determined for various recess distances, and an optimum exit length was found that provides stable operation for ultra-lean flames.

The National Ignition Facility (NIF) is a high energy glass laser system and target chamber that will be used for research in inertial confinement fusion. The 192 beams of the NIF laser system are pumped by over 8600 Xenon flashlamps. The power conditioning system for NIF must deliver nearly 300 MJ of energy to the flashlamps in a cost effective and reliable manner. The present system design has over 200 capacitive energy storage modules that store approximately 1.7 MJ each and deliver that energy through a single switch assembly to 20 parallel sets of two series flashlamps. Although these are many possible system designs, few will meet the aggressive cost goals necessary to make the system affordable. Sandia National Laboratory and Lawrence Livermore National Laboratory are developing the system and component technologies that will be required to build the power conditioning system for the National Ignition Facility. This paper will describe the ongoing development activities for the NIF power conditioning system.© (1997) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.

Lower-cost alternatives to platinum electrocatalysts are being explored for the sustainable production of hydrogen, but often trial-and-error approaches are used for their development. Now, principles are elucidated that suggest pathways to rationally design efficient metal-free electrocatalysts based on doped graphene.