• Energy Research
• natural sciences close
• 13. Climate action close
• Applied Energy close

Abstract The field of energy harvesting holds the promise of making our buildings “smart” if effective energy sources can be developed for use in ambient indoor conditions. Photovoltaics (PV), especially in its thin flexible form for easy integration, become a prime candidate for the aim, if tailored for low-density artificial light. We designed a test system which enabled us to measure the performance of PV devices under compact fluorescent lamp (CFL) and light-emitting diode (LED) illumination at different illuminance levels and compared polycrystalline and amorphous silicon cells with our own flexible dye solar cells (DSCs). Whereas poly-Si cells, with 15% outdoor efficiency, delivered at 200 lux under CFL only 2.8 μW/cm2 power density (and an efficiency of 4.4%), a-Si specifically designed for indoors, gave 5.9 μW/cm2 and 9.2% efficiency under the same CFL conditions (and 7.5% efficiency under LED). However, we show that the customization of flexible DSCs, by simply formulating ad-hoc less-concentrated, more transparent electrolytes, enabled these devices to outperform all others, providing average power densities of 8.0 μW/cm2 and 12.4% efficiencies under 200 lux CFL (more than quadruple compared to those measured at 1 sun), and 6.6 μW/cm2 and 10% efficiency under 200 lux LED illumination.

Abstract Algae have been considered as a promising biodiesel feedstock. One of the major factors affecting large-scale algae technology application is poor wintering cultivation performance. In this study, an integrated approach is investigated combining freshwater microalgae Chlorella zofingiensis wintering cultivation in pilot-scale photobioreactors with artificial wastewater treatment. Mixotrophic culture with the addition of acetic acid (pH-regulation group) and autotrophic culture (control group) were designed, and the characteristics of algal growth, lipid and biodiesel production, and nitrogen and phosphate removal were examined. The results showed that, by using acetic acid three times per day to regulate pH at between 6.8 and 7.2, the total nitrogen (TN) and total phosphate (TP) removal could be increased from 45.2% to 73.5% and from 92.2% to 100%, respectively. Higher biomass productivity of 66.94 mg L−1 day−1 with specific growth rate of 0.260 day−1 was achieved in the pH-regulation group. The lipid content was much higher when using acetic acid to regulate pH, and the relative lipid productivity reached 37.48 mg L−1 day−1. The biodiesel yield in the pH-regulated group was 19.44% of dry weight, with 16–18 carbons as the most abundant composition for fatty acid methyl esters. The findings of the study prove that pH adjustment using acetic acid is efficient in cultivating C. zofingiensis in wastewater in winter for biodiesel production and nutrient reduction.

Abstract The intervention on the existing building envelope thermal insulation is the main and effective solution in order to achieve a significant reduction of the building stock energy needs. The infrared technique is the methodology of the energy diagnosis aimed to identify qualitatively the principal causes of energy losses: the presence of thermal bridges. Those weak parts of the building envelope in terms of heat transfer result not easy to treat with an energy efficiency intervention, while they are gaining importance in the buildings total energy dispersion, as the level of insulation of opaque and transparent materials is continuously increasing. It is generally possible to evaluate the energy dispersions through these zones with a deep knowledge of the materials and the geometry using a numerical method. Besides, authors proposed in the past a methodology to assess the flux passing through thermal bridges with an infrared image correctly framed. The analysis of surface temperatures of the undisturbed wall and of the zone with thermal bridge, allows to define the Incidence Factor of the thermal Bridge (Itb). This parameter is strongly affected by the thermographic image accuracy, therefore, this paper deals with the development and validation of an innovative mathematical algorithm to enhance the image resolution and the consequent accuracy of the energy losses assessment. An experimental campaign in a controlled environment (hot box apparatus) has been conducted on three typologies of thermal bridge, firstly performing the thermographic survey and then applying the enhancement algorithm to the infrared images in order to compare the Itb and the linear thermal transmittance ψ values. Results showed that the proposed methodology could bring to an accuracy improvement up to 2% of the total buildings envelope energy losses evaluated by quantitative infrared thermography. Moreover, the proposed algorithm allows the implementation of a further process applicable to the images, in order to extract the physical boundaries of the hidden materials causing the thermal bridge, so revealing itself as a useful tool to identify exactly the suitable points of intervention for the thermal bridge correction. The application of the imaging process on the quantitative infrared thermography is an innovative approach that makes more accurate the evaluation of the actual heat loss of highly insulating buildings and reaching a higher detail on the detection and treating of thermal bridges.

Abstract The Department of Energy “Co-Optimization of Fuels and Engines” initiative aims to simultaneously develop novel high-performance fuels with advanced engine designs to reduce petroleum consumption. To achieve commercialization, advanced engines running on alternative fuels still must meet emissions regulations. Warm three-way catalysts (TWC) are very effective at meeting the stringent emissions regulations on pollutants such as nitrogen oxides (NOx), non-methane organic gases (NMOG) and carbon monoxide (CO) from gasoline-fueled spark-ignition (SI) engines operating under stoichiometric conditions; thus, most SI engine emissions occur during cold-start, when the TWC has not yet achieved light-off. In the current study, the light-off behavior of novel high-performance fuel candidates has been investigated on a hydrothermally-aged commercial TWC using a synthetic engine-exhaust flow reactor system according to industry guidelines. Over 30 potential fuel components were examined in this study, including alkanes, alkenes, alcohols, ketones, esters, aromatic ethers, and non-oxygenated aromatic hydrocarbons. Short-chain acyclic oxygenates, including alcohols, ketones, and esters, tended to light off at relatively low temperatures, while alkenes, aromatics, and cyclic oxygenates tended to light off at relatively high temperatures. The light-off behavior of alkanes and alkenes depended strongly on their size and structure. In terms of the influence on CO light-off on the TWC, the fuels fell into two distinct categories: (i) non-inhibiting species including C2-C3 alcohols, alkanes, acyclic ketones, and esters; and (ii) inhibiting species including alkenes, aromatic hydrocarbons, cyclic oxygenates, and C4 alcohols.

Abstract Nowadays, many countries adopt an active agenda to mitigate the impact of greenhouse gas emissions by moving towards less polluting energy generation technologies. The environmental costs, directly or indirectly generated to achieve such a challenging objective, remain however largely underexplored. Until now, research has focused either on pure economic approaches such as Computable General Equilibrium (CGE) and partial equilibrium (PE) models, or on (physical) energy supply scenarios. These latter could be used to evaluate the environmental impacts of various energy saving or cleaner technologies via Life Cycle Assessment (LCA) methodology. These modelling efforts have, however, been pursued in isolation, without exploring the possible complementarities and synergies. In this study, we have undertaken a practical combination of these approaches into a common framework: on the one hand, by coupling a CGE with a PE model, and, on the other hand, by linking the outcomes from the coupling with a hybrid input–output−process based life cycle inventory. The methodological framework aimed at assessing the environmental consequences of two energy policy scenarios in Luxembourg between 2010 and 2025. The study highlights the potential of coupling CGE and PE models but also the related methodological difficulties (e.g. small number of available technologies in Luxembourg, intrinsic limitations of the two approaches, etc.). The assessment shows both environmental synergies and trade-offs due to the implementation of energy policies. For example, despite the changes in technologies towards the reduction of greenhouse gas emissions, only marginal improvements are observed in the climate change mitigation scenario as compared to the Business-As-Usual. The energy related production and imports are indeed expected to increase over time and represent a large contribution to the country’s impacts. Interestingly, side effects on other impacts than climate change or fossil resource depletion (e.g. ionising radiation and water depletion) may also occur mainly due to the use of nuclear energy in neighbouring countries.

Abstract Predicting the distribution and resource of gas hydrates and understanding gas hydrate forming mechanisms are critical for assessing natural gas hydrate exploration potential, as well as exploiting hydrates. This study aims to provide a portable solution for evaluating resource of natural gas hydrate and quantifying contribution of methane sources via numerical simulations constrained by site-specific data. To numerically describe the complex process of biogenic methane production, an integrated simulation package, TOUGH + Hydrate + React (TOUGH + HR), was developed by coupling reactive transport, biodegradation and deposition of organic matter with behavior of hydrate-bearing system. Based on observed data from site SH2 in the South China Sea, a growing one-dimensional column model was constructed, and simulated via the developed TOUGH + HR tool. The results showed that when considering biogenic methane was the only source for hydrate, simulated maximum saturation of hydrate reached ~ 0.19, which is much lower than the observed value (~0.46), suggesting that the in-situ biogenic methane is not enough to form the high-saturation hydrate. When the upward flux of methane (considered as thermogenic methane) increased to 1.00 × 10−11 k g · m - 2 · s - 1 , both simulated saturation and distribution of hydrates matched the observed data well, including the profile of remained total organic carbon (TOC), the location of interface between dissolved methane and sulfate (SMI), and the derived chlorinity. Simulation results suggest that the ratio of biogenic methane to thermogenic methane forming hydrates was about 1:3. Predicted amount of methane hydrate using the column model was 3258.33 kg, very close to the estimated based on field observation (3112.82 kg).

Abstract This study focuses on improving the efficiency of the microwave (MW) pretreatment of waste activated sludge (WAS) through deflocculation mediated by sodium tripolyphosphate (STPP), a cationic binding agent. Deflocculated sludge was subjected to MW pretreatment to assess its impact on biomass disintegration. At the optimised energy for MW pretreatment (14,000 kJ/kg TS), the chemical oxygen demand (COD) solubilisation was 28% and 21% and the reduction in suspended solids (SS) was 38% and 26%, respectively, for deflocculated (treated with a cationic binding agent followed by microwaves) and flocculated (treated by microwaves alone) sludge samples. The formation of volatile fatty acids in the deflocculated sludge medium (840 mg/L) was comparatively higher than that in the flocculated sludge (420 mg/L) and the control (62 mg/L). This study indicates that deflocculated sludge is more amenable to hydrolysis. The results of a test of biochemical methane potential also confirmed the greater amenability of deflocculated sludge for anaerobic degradation.

Waste biomass is generated during the conservation management of semi-natural habitats, and represents an unused resource and potential bioenergy feedstock that does not compete with food production. Thermogravimetric analysis was used to characterise a representative range of biomass generated during conservation management in Wales. Of the biomass types assessed, those dominated by rush (Juncus effuses) and bracken (Pteridium aquilinum) exhibited the highest and lowest volatile compositions respectively and were selected for bench scale conversion via fast pyrolysis. Each biomass type was ensiled and a sub-sample of silage was washed and pressed. Demineralization of conservation biomass through washing and pressing was associated with higher oil yields following fast pyrolysis. The oil yields were within the published range established for the dedicated energy crops miscanthus and willow. In order to examine the potential a multiple output energy system was developed with gross power production estimates following valorisation of the press fluid, char and oil. If used in multi fuel industrial burners the char and oil alone would displace 3.9 × 105 tonnes per year of No. 2 light oil using Welsh biomass from conservation management. Bioenergy and product development using these feedstocks could simultaneously support biodiversity management and displace fossil fuels, thereby reducing GHG emissions. Gross power generation predictions show good potential.