• Energy Research
• chemical sciences close

Facile sol–gel synthesis of Mo:BiVO4 thin films with optimized morphology results in reduced surface recombination and enhanced hole transfer efficiency.

It is now recognized that analytical chemistry must also be a target for green principles, in particular chromatographic methods which typically use relatively large volumes of hazardous organic solvents. More generally, high performance liquid chromatography (HPLC) is employed routinely for quality control of complex mixtures in various industries. Acetonitrile and methanol are the most commonly used organic solvents in HPLC, but they generate an impact on the environment and can have a negative effect on the health of analysts. Ethanol offers an exciting alternative as a less toxic, biodegradable solvent for HPLC. In this work we demonstrate that replacement of acetonitrile with ethanol as the organic modifier for HPLC can be achieved without significantly compromising analytical performance. This general approach is demonstrated through the specific example analysis of a complex plant extract. A benchmark method employing acetonitrile for the analysis of Bidens pilosa extract was statistically optimized using the Green Chromatographic Fingerprinting Response (GCFR) which includes factors relating to separation performance and environmental parameters. Methods employing ethanol at 30 and 80°C were developed and compared with the reference method regarding their performance of separation (GCFR) as well as by a new metric, Comprehensive Metric to Compare Liquid Chromatography Methods (CM). The fingerprint with ethanol at 80°C was similar to or better than that with MeCN according to GCFR and CM. This demonstrates that temperature may be used to replace harmful solvents with greener ones in HPLC, including for solvents with significantly different physiochemical properties and without loss in separation performance. This work offers a general approach for the chromatographic analysis of complex samples without compromising green analytical chemistry principles.

Fullerene-based materials are widely used as acceptor and electron transport layer materials in organic and planar perovskite solar cells. Modeling of electronic properties such as band alignment and charge transport for these applications is typically done using optimized geometries. Here, we estimate the effects of nuclear motions on band structure, and electron and hole transport in two prototypical fullerenes, C60 and C70. We model the dynamics in solid fullerenes using Density Functional Tight Binding and we use the Density Functional Theory based Projection of Monomer Orbitals on Dimer Orbitals (DIPRO) approach to estimate the effects on the charge transfer integral in the Marcus approximation. We show that room-temperature molecular dynamics cause a shift and spread of frontier orbital energies on the order of 0.1 eV, which leads to an increase by more than a factor of two in the Marcus exponent, and can cause a decrease by up to orders of magnitude in the overlap integral, leading, in most cases, to an overall decrease in the charge transport rate.

Abstract The new multicomponent Co-based catalysts with additives of group 8 metal and rare earth elements and supported on alumina have been tested in the dry and steam conversion of a model biogas. The processes were carried out in a flow quartz reactor under the following conditions: atmospheric pressure, a gas hourly space velocity of 1000 h−1 and temperatures of 300–800°C. The catalysts were characterised using electron microscopy, BET and X-ray analysis. The methane is almost completely converted in the dry reforming of biogas at T≤800°C. Synthesis gas with a ratio of H2/CO>1.0 is a main product of biogas reforming over the multicomponent catalysts studied. Adding steam in a feed composition increases both the methane conversion and the hydrogen yield at lower temperatures. Almost complete methane conversion occurs at T<750°C in the steam reforming of biogas. The catalysts are highly effective and exhibit stable activity throughout 100 h of continuous testing.

Free energy of micelle formation has been evaluated for spherical sodium dodecyl sulfate (SDS) in water by a thermodynamic integration method combined with a series of large-scale molecular dynamics calculations following the chemical species model. In particular, free energy change Δμn+10 with respect to the addition of one surfactant molecule to the spherical micelle of size n was obtained as a function of n. The free energy profile showed a minimum followed by a maximum, which corresponds to a peak in the size distribution. The calculated peak size n=57 near its critical micelle concentration is in good agreement with the experimental averaged aggregation number n=55–75 of the SDS micelle. The distribution showed a rather sharp peak, indicating that the size is almost a monodisperse one. The size is likely to be insensitive to the total concentration of the surfactant.

Owing to their high luminous efficiency and tunable emission in both red light and far-red light regions, Mn4+ ion-activated phosphors have appealed significant interest in photoelectric and energy conversion devices such as white light emitting diode (W-LED), plant cultivation LED, and temperature thermometer. Up to now, Mn4+ has been widely introduced into the lattices of various inorganic hosts for brightly red-emitting phosphors. However, how to correlate the structure-activity relationship between host framework, luminescence property, and photoelectric device is urgently demanded. In this review, we thoroughly summarize the recent advances of Mn4+ doped phosphors. Meanwhile, several strategies like co-doping and defect passivation for improving Mn4+ emission are also discussed. Most importantly, the relationship between the protocols for tailoring the structures of Mn4+ doped phosphors, increased luminescence performance, and the targeted devices with efficient photoelectric and energy conversion efficiency is deeply correlated. Finally, the challenges and perspectives of Mn4+ doped phosphors for practical applications are anticipated. We cordially anticipate that this review can deliver a deep comprehension of not only Mn4+ luminescence mechanism but also the crystal structure tailoring strategy of phosphors, so as to spur innovative thoughts in designing advanced phosphors and deepening the applications.

Bromine and chlorine are almost ubiquitous in waste of electrical and electronic equipment (WEEE) and the knowledge of their content in the plastic fraction is an essential step for proper end of life management. The aim of this study is to compare the following analytical methods: energy dispersive X-ray fluorescence spectroscopy (ED-XRF), ion chromatography (IC), ion-selective electrodes (ISEs), and elemental analysis for the quantitative determination of chlorine and bromine in four real samples taken from different WEEE treatment plants, identifying the best analytical technique for waste management workers. Home-made plastic standard materials with known concentrations of chlorine or bromine have been used for calibration of ED-XRF and to test the techniques before the sample analysis. Results showed that IC and ISEs, based upon dissolution of the products of the sample combustion, have not always achieved a quantitative absorption of the analytes in the basic solutions and that bromine could be underestimated since several oxidation states occur after combustion. Elemental analysis designed for chlorine determination is subjected to strong interference from bromine and required frequent regeneration and recalibration of the measurement cell. The most reliable method seemed to be the non-destructive ED-XRF. Calibration with home-made standards, having a similar plastic matrix of the samples, enabled us to carry out quantitative determinations, which have been revealed to be satisfactorily accurate and precise. In all the analyzed samples a total concentration of chlorine and/or bromine between 0.6 and 4 w/w% was detected, compromising the feasibility of a mechanical recycling and suggesting the exploration of an alternative route for managing these plastic wastes.

The use of hydrogen gas as a means of decoupling supply from demand is crucial for the transition to carbon-neutral energy sources and a greener, more distributed energy landscape. This work shows how simple commercially available titanium nitride coatings can be used to extend the lifetime of 316 grade stainless-steel electrodes for use as the cathode in an alkaline electrolysis cell. The material was subjected to accelerated ageing, with the specific aim of assessing the coating’s suitability for use with intermittent renewable energy sources. Over 2000 cycles lasting 5.5 days, an electrolytic cell featuring the coating outperformed a control cell by 250 mV, and a reduction of overpotential at the cathode of 400 mV was observed. This work also confirms that the coating is solely suitable for cathodic use and presents an analysis of the surface changes that occur if it is used anodically.