• Energy Research
• 2016-2025close
• mechanical engineering close
• 13. Climate action close

Deployment of photovoltaic (PV) systems has recently been encouraged for large-scale and small-scale businesses in order to meet the global green energy targets. However, one of the most significant hurdles that limits the spread of PV applications is the dust accumulated on the PV panels’ surfaces, especially in desert regions. Numerous studies sought the use of cameras, sensors, power datasets, and other detection elements to detect the dust on PV panels; however, these methods pose more maintenance, accuracy, and economic challenges. Therefore, this paper proposes an intelligent system to detect the dust level on the PV panels to optimally operate the attached dust cleaning units (DCUs). Unlike previous strategies, this study utilizes the expanded knowledge and collected data for solar irradiation and PV-generated power, along with the forecasted ambient temperature. An expert artificial intelligence (AI) computational system, adopted with the MATLAB platform, is utilized for a high level of data prediction and processing. The AI was used in this study in order to estimate the unprovided information, emulate the provided measurements, and accommodate more input/output data. The feasibility of the proposed system is investigated using actual field data during all possible weather conditions.

The use of natural gas as an energy source is increasing significantly due to its low greenhouse gas emissions. However, the common methods of natural gas storage and transportation, such as liquefied or compressed natural gas, are limited in their applications because they require extreme conditions. Gas hydrate technology can be a promising alternative to conventional approaches, as artificially synthesized hydrates provide an economical, environmentally friendly, and safe medium to store energy. Nevertheless, the low rate of hydrate formation is a critical problem that hinders the industrial application of this technology. Therefore, chemical promoters are being developed to accelerate the kinetics of gas hydrate formation. In this paper, the effect of new sodium sulfosuccinate compounds, synthesized based on glycerol and pentaerythritol, on methane hydrate formation was studied. Experiments under dynamic conditions using high-pressure autoclaves demonstrated that the conversion of water-to-hydrate forms increased from 62 ± 5% in pure water to 86 ± 4% for the best promoter at concentration 500 ppm. In addition, the rate of hydrate formation increases 2–4 times for different concentrations. Moreover, none of the synthesized reagents formed foam, compared to sodium dodecyl sulfate, in which the foam rate was 3.7 ± 0.2. The obtained reagents showed good promotional properties and did not form foam, which makes them promising promoters for gas hydrate technology.

Purpose. In modern conditions of energy consumption growth and a rapid increase in energy prices the actual problem is the development and implementation of energy efficiency programs and resource-saving conversion in to a source to provide the needs of industry and municipal power. The paper aims to solve the urgent problem of energy saving and efficient use of fuel-energy ones and heat supply system optimization on the basis of Uman National University of Horticulture (UNUH). Methodology. The work investigated the process of heating and hot water supply in the course of 2007-2015 years. Implementation of current problems of energy saving is grounded on the scientific-practical and efficient assurance of fuel and energy usage. At the same time energy-saving technologies are viewed as a priority direction of the energy sector development, reduction of man-induced impact on the environment and as a way of improving the competitiveness of the national economy. Findings. Statistical data acquisition and analyzing of gas flow and outside air temperature for nine years was carried out. On the basis of this analysis, the problem was identified and specific targets for its solutions were set. Originality. Scientific novelty lies in solving the problem of energy saving and efficient use of fuel resources in Ukraine through the use of a systematic approach, the methodology development of efficient use of different fuels and optimization of local heating operation, applying contemporary automation and control systems. Firstly it was in detail analyzed and conducted the comprehensive assessment of various factors influence on energy conservation. It takes into account the human factor, professionalism and responsibility of the operators of boilers and their superiors, as well as the relevant control services. Practical value. For UNUH campus hybrid use of solid fuel and gas boilers was carried out. Decentralization of the university heating system has been conducted through the restoration of 350 individual heating systems in residential buildings, remote departments and campus dormitories. The conclusions propose the list of activities upon the real economy of fuel and energy resources, and measures to overcome the economic and political crisis in the country.

The global climate protection policy aimed at achieving a zero greenhouse gas emissions target has led to the fast incorporation of large-scale photovoltaics into the power network. The conventional AC grid was not modeled to be incorporated with large-scale non-synchronous inverter-based energy resources (IBR). Incorporating inertia-free IBR into the grid leads to technical issues such as the degradation of system strength and inertia, therefore affecting the safety and reliability of the electrical power system. This research introduced a new solution to incorporate a flywheel in the rotor of a synchronous machine to improve the dynamic inertia control during a system disruption and to maintain the constancy of the system. The objective of this work is to enhance large-scale photovoltaic systems in such a way that they can avoid failures during a fault. A model of transient constancy with two synchronous generators and a LSPV is established in PowerWorld modeling software. A line-to-ground and three-phase fault are simulated in a system with up to 50% IBR penetration. The outcomes showed that the power network was able to ride through faults (RTFs) and that the stability of frequency and voltage are enhanced because of a flywheel that improved grid inertia and strength.

Approximately 40% of the overall energy consumption of society is consumed by buildings. Most building energy usage is due to poor envelope performance. In regions with cold winters, the corners of structures typically have the lowest interior surface temperature. In corners, condensation, frost, and mold are common. This has a substantial effect on building energy usage and residents’ comfort. In this study, the heat loss of corner envelopes is evaluated, and a suitable insulation construction of wall corners is constructed to increase the surface temperature of the envelope interior. Computational Fluid Dynamics simulation has been used to examine the heat transmission in a corner of an ultra-low energy building in this study. By comparing the indoor surface temperature to the soil temperature beneath the building, the insulation construction of wall corners has been tuned. The study results indicate that the planned insulation construction of wall corners can enhance the internal surface temperature in the corner and the soil temperature under the structure by approximately 8.5 °C, thereby decreasing the indoor–outdoor temperature differential and the heat transfer at ground level. In extremely cold places, the insulation horizontal extension belt installation can help prevent the earth beneath the building from freezing throughout the winter.

Tidal turbine blades are subject to harsh loading and environmental conditions, including large thrust and torsional loadings, relative to wind turbine blades, due to the high density of seawater, among other factors. The complex combination of these loadings, as well as water ingress and associated composite laminate saturation, have significant implications for blade design, affecting overall device design, stability, scalability, energy production and cost-effectiveness. This study investigates the effect of seawater ingress on composite material properties, and the associated design and life expectancy of tidal turbine blades in operating conditions. The fatigue properties of dry and water-saturated glass fibre reinforced laminates are experimentally evaluated and incorporated into tidal blade design. The fatigue lives of pitch- and stall-regulated tidal turbine blades are found to be altered by seawater immersion. Water saturation is shown to reduce blade life about 3 years for stall-regulated blades and by about 1-2 years for pitch-regulated blades. The effect of water ingress can be compensated by increased laminate thickness. The tidal turbine blade design methodology presented here can be used for evaluation of blade life expectancy and tidal device energy production. (C) 2018 Elsevier Ltd. All rights reserved.

The article presents an innovative method of analyzing energy companies’ strategies, which aims to identify the strategic orientation of the entities subject to the research and, thus, to initially define the directions of strategic changes in the analyzed sector. The aim of the research, the results of which were used in this publication, was to identify the features of energy sector companies’ strategies in the European Union in the period of sector transformation caused by the new climate policy. The analysis area is the energy sector, i.e., the sector whose fundamental strategic goal is energy production. The research used a critical analysis of the subject literature and desk research method with the use of the researchers’ own analytical equipment, developed for the needs of this analysis. It was assumed in the conducted research that the primary source of information in the empirical study, the information subject to subsequent analysis, was the analysis of official documents (strategies, financial reports, etc.) posted on the websites of the surveyed corporations. The research results indicate the dominance of the resource-based approach in implementing strategic postulates of the surveyed companies. Nevertheless, the operational activity focuses on the implementation of innovative solutions towards decarbonization and climate neutrality.

Climate change, clean energy transition, the energy security quest, and international relations have triggered the revival of renewable energy as a solution to these problems. Nowadays, there is an energy transition where renewable energies bring geopolitical changes in a world where fossil fuels are becoming less relevant. This article aims to assess how the transition influences Spain’s energy relations with other countries regarding electricity and its sources, in alignment with the European Green Deal. In order to do so, its current energy situation, the renewable energies development and its energy import-export relations are examined. The results show that despite progress in green regionalization through more electric interconnection, little difference is to be found in traditional relations with fossil fuel countries exporters, but more are the contractions in Spanish energy economic policy, as here is explained.

Renewable energy provides an effective solution to the problem existing between energy and environmental protection. Tidal energy has great potential as a form of renewable energy. Tidal current generation (TCG) technology is the earliest renewable energy power generation technology. The advancement of science and technology has led to TCG rapidly developing since its emergence in the last century. This paper investigates the development of TCG in recent years based on the key components of TCG systems, both in terms of tidal energy harvesting research and power generation unit research. A summary of tidal energy harvesting is presented, investigating the main tidal energy harvesting units currently available. In addition, research on generators and generator control is summarized. Lastly, a comparison between horizontal and vertical axis turbines is carried out, and predictions are made about the future trends in TCG development. The purpose of this review is to summarize the research status and research methods of key components in tidal energy power generation technology and to provide insight into the research of tidal energy-related technologies.

This paper proposes a new method to determine optimal energy storage sizing in photovoltaic and wind hybrid power generation systems.These generations are placed in a scheme of three blocks to forecast, measure, and dispatch/control and distribute power flows in whole system to meet requirements of the demandside management program in Viet Nam.Data about electric load power, power of solar irradiance, ambient temperature, wind speed and other weather conditions must be forecasted in a high accuracy.An algorithm to determine the optimal sizing is designed basing on forecasting data, constraints, the relation of quantities in whole system and the capability to charge/discharge energy of energy storage.The optimal sizing in this research helps to rearrange load diagrams that compensate deficient energy completely in stages having high and medium price levels.It can be applied at each bus to reduce cost for buying electricity from electric power system.The new proposal is illustrated by simulation results in a case study carried out by MATLAB 2017a. This paper proposes a new method to determine optimal energy storage sizing in photovoltaic and wind hybrid power generation systems.These generations are placed in a scheme of three blocks to forecast, measure, and dispatch/control and distribute power flows in whole system to meet requirements of the demandside management program in Viet Nam.Data about electric load power, power of solar irradiance, ambient temperature, wind speed and other weather conditions must be forecasted in a high accuracy.An algorithm to determine the optimal sizing is designed basing on forecasting data, constraints, the relation of quantities in whole system and the capability to charge/discharge energy of energy storage.The optimal sizing in this research helps to rearrange load diagrams that compensate deficient energy completely in stages having high and medium price levels.It can be applied at bus each to reduce cost for buying electricity from electric power system.The new proposal is illustrated by simulation results in a case study carried out by MATLAB 2017a. This paper proposes a new method to determine optimal energy storage sizing in photovoltaic and wind hybrid power generation systems.These generations are placed in a scheme of three blocks to forecast, measure, and dispatch/control and distribuute power flows in whole system to meet requirements of the demandside management program in Viet Nam.Data about electric load power, power of solar irradiance, ambient temperature, wind speed and other weather conditions must be forecasted in a high accuracy.An algorithm to determine the optimal sizing is designed basing on forecasting data, constraints, the relation of quantities in whole system and the capability to charge/discharge energy of energy storage.The optimal sizing in this research helps to rearrange loadams that complement complete complete in complete having having hight staving energy power.The electric beaching in viet price in viet Nam. This paper proposes a new method to determine optimal energy storage sizing in photovoltaic and wind hybrid power generation systems.These generations are placed in a scheme of three blocks to forecast, measure, and dispatch/control and distribute power flows in whole system to meet requirements of the demandside management program in Viet Nam.Data about electric load power, power of solar irradiance, ambient temperature, wind speed and other weather conditions must be forecasted in a high accuracy.An algorithm to determine the optimal sizing is designed basing on forecasting data, constraints, the relation of quantities in whole system and the capability to charge energy of energy of energy storage.The optimum sizing thisearch helps to rearrange loadagrams that thatate de enerficity completelytely stages in having high high medium meels levelite levelite. تقترح هذه الورقة طريقة جديدة لتحديد الحجم الأمثل لتخزين الطاقة في أنظمة توليد الطاقة الكهروضوئية والرياح الهجينة. يتم وضع هذه الأجيال في مخطط من ثلاث كتل للتنبؤ وقياس وإرسال/التحكم وتوزيع تدفقات الطاقة في النظام بأكمله لتلبية متطلبات برنامج إدارة الطلب في فيتنام. يجب التنبؤ بالبيانات حول طاقة الحمل الكهربائي، وقوة الإشعاع الشمسي، ودرجة الحرارة المحيطة، وسرعة الرياح وغيرها من الظروف الجوية بدقة عالية. تم تصميم خوارزمية لتحديد الحجم الأمثل بناءً على بيانات التنبؤ والقيود وعلاقة الكميات في النظام بأكمله والقدرة على شحن/تفريغ طاقة تخزين الطاقة. يساعد الحجم الأمثل في هذا البحث على إعادة ترتيب مخططات الحمل التي تعوض الطاقة الناقصة تمامًا على مراحل ذات مستويات سعرية عالية ومتوسطة. يمكن تطبيقها في كل حافلة لتقليل تكلفة شراء الكهرباء من نظام الطاقة الكهربائية. يتم توضيح الاقتراح الجديد من خلال نتائج المحاكاة في دراسة حالة أجرتها MATLAB 2017a.