• Energy Research
• 2021-2025close
• nano-technology close
• 7. Clean energy close
• 1. No poverty close

A complete surveillance strategy for wind turbines requires both the condition monitoring (CM) of their mechanical components and the structural health monitoring (SHM) of their load-bearing structural elements (foundations, tower, and blades). Therefore, it spans both the civil and mechanical engineering fields. Several traditional and advanced non-destructive techniques (NDTs) have been proposed for both areas of application throughout the last years. These include visual inspection (VI), acoustic emissions (AEs), ultrasonic testing (UT), infrared thermography (IRT), radiographic testing (RT), electromagnetic testing (ET), oil monitoring, and many other methods. These NDTs can be performed by human personnel, robots, or unmanned aerial vehicles (UAVs); they can also be applied both for isolated wind turbines or systematically for whole onshore or offshore wind farms. These non-destructive approaches have been extensively reviewed here; more than 300 scientific articles, technical reports, and other documents are included in this review, encompassing all the main aspects of these survey strategies. Particular attention was dedicated to the latest developments in the last two decades (2000–2021). Highly influential research works, which received major attention from the scientific community, are highlighted and commented upon. Furthermore, for each strategy, a selection of relevant applications is reported by way of example, including newer and less developed strategies as well.

Abstract Energy harvesting in natural environment has attracted a great deal of attention to generate stable and continuous electrical energy. In this work, we proposed an advanced pyroelectric energy harvesting system by using form-stable phase change material (PCM) composites. The PCM composite connected pyro-electrode generated electrical polarization due to the change of external environment. Polyethylene glycol (PEG) and 1-tetradecanol (1-TD) composites with different phase transition field induced the temperature difference during light-on/-off process. Poly(vinylidene difluoride) (PVDF) was utilized for pyroelectric energy harvesting. The PVDF based pyro-electrode was applied changing the conditions of solar light irradiation and heat air flow. The PCM composites controlled the temperature fluctuation effectively and generated stable output electrical voltage and current. Numerical simulation was carried out to provided in-depth insight into the underlying physics of the system. We envisage that the developed thermal energy harvesting system can pave a way towards high-throughput and sustainable energy harvesting.

Energy harvesting is a useful technique for various kinds of self-powered electronic devices and systems as well as Internet of Things technology. This study presents a two-degrees-of-freedom (2DOF) electromagnetic energy harvester that can use environment vibration and provide energy for small electronic devices. The proposed harvester consists of a cylindrical tube with two moving magnets suspended by a magnetic spring mechanism and a stationary coil. In order to verify the theoretical model, a prototype electromagnetic harvester was constructed and tested. The influence of key parameters, including excitation acceleration, response to a harmonic frequency sweep, and electromechanical coupling on the generated characteristics of the harvester, was investigated. The experimental and theoretical results showed that the proposed electromagnetic energy harvester was able to increase the resonance bandwidth (60–1200 rad/s) and output power (0.2 W). However, due to strong nonlinearity, an unstable region occurred near the main first resonance, which resulted from the Neimark–Sacker bifurcation.

Abstract The photoelectrocatalysis (PEC) technique was applied in CO2 reduction using different proportions of Cu, Pd, and Pt supported on graphene nanoribbons (GNR) and deposited on the surfaces of TiO2 nanotubes. Altogether, nine combinations of TiO2-NT/GNR-metal were assembled, although only three of them efficiently promoted the generation of methanol and ethanol in high quantities. Comparison with the photocatalysis, photolysis, and electrocatalysis techniques showed the extremely high efficiency of PEC, which enabled production of methanol and ethanol at levels around 19.2-fold and 44.4-fold higher, respectively, than photocatalysis, the second most efficient technique. The presence of metallic nanoparticles in the system facilitated CO2 reduction due to the trapping of the photogenerated electrons, prolonging their lifetime, lowering the reaction energy barrier for CO2 reduction, and provided active intermediates. Therefore, the assembly of these materials containing low amounts of metals is highly promising, since it can assist in alleviating environmental problems caused by CO2 emissions, while at the same time enabling the energetically efficient generation of compounds of commercial value.

Abstract In the last decade, there has been a growing trend towards flexible body wave energy converters (WECs) enabled by rubber-like elastomeric composite membrane structures that can simplify all aspects of WEC design. Currently, there are few literature studies detailing the implementations of membranes into WEC design. This paper aims to overcome this by reviewing the developments, material selection and modelling procedures for novel membrane based wave energy converters (mWECs), providing the reader with a comprehensive overview of the current state of the technology. In the first half of this paper, all of the possible WEC implementation areas are reviewed which include the primary mover, power take-off (PTO) and other sub-assembly systems. For the primary mover, the review has identified three main working surface approaches using membranes, these are: air-filled cells, water filled tubes and tethered carpets; which aim to reduce peak loads for enhanced reliability and survivability. In other areas, the PTO of WECs can benefit from using soft dielectric elastomer generators (DEGs) which offer a simpler designs compared with conventional mechanical turbomachinery. These have been implemented into the membrane working surface as well as replacing the PTO in existing WEC architectures. In the second half of the paper, a discussion is made on the material selection requirements with a few possible compositions presented. Following this, the potential modelling procedures for these devices is detailed. The device numerical models have altered existing procedures to take into account the non-linearities caused by the membrane interface and membrane PTO damping.

AbstractAlloy anodes composed of microsized particles receive increasing attention recently, which outperform the nanostructured counterparts in both the manufacturing cost and volumetric energy density. However, the pulverization of particles and fracture of solid electrolyte interphase (SEI) during cycling brings about fast capacity degradation. Herein, it is shown how normally considered fragile SEI can become highly elastic through electrolyte chemistry regulation. Compared to the SEI constructed in classic carbonate electrolyte, the atomic force microscopy tests reveal that the one built in ether‐based electrolyte doubles the maximum elastic strain to accommodate the repeated swelling‐contracting. Such an SEI effectively encapsulates the microsized Sb anodes to prevent the capacity loss from particle isolation. Coupled with an intercalation‐assisted alloying reaction mechanism, a sustained capacity of ≈573 mAh g−1 after 180 cycles at 0.1 A g−1 with outstanding initial Coulombic efficiency is obtained, which is among the highest values achieved in K‐ion batteries. This study emphasizes the significance of building robust SEI, which offers the opportunity to enable stable microsized alloy anodes.

Meeting our current energy demands requires a reliable and efficient renewable energy source that will bring balance between power generation and energy consumption. Organic photovoltaic cells (OPVs), perovskite solar cells and dye-sensitized solar cells (DSSCs) are among the next-generation technologies that are progressing as potential sustainable renewable energy sources. Since the discoveries of highly conductive organic charge-transfer compounds in the 1950s, organic semiconductors have captured attention. Organic photovoltaic solar cells possess key characteristics ideal for emerging next-generation technologies such as being nontoxic, abundant, an inexpensive nanomaterial with ease of production, including production under ambient conditions. In this review article, we discuss recent methods developed towards improving the stability and average efficiency of nanostructured materials in OPVs aimed at sustainable agriculture and improve land-use efficiency. A comprehensive overview on developing cost-effective and user-friendly organic solar cells to contribute towards improved environmental stability is provided. We also summarize recent advances in the synthetic methods used to produce nanostructured active absorber layers of OPVs with improved efficiencies to supply the energy required towards ending poverty and protecting the planet.

Funding Information: This work was supported Southeast University (SEU) project 3203002003A1 and National Natural Science Foundation of China (NSFC) under the grant 51772080 and 11604088 . Jiangsu Provincial Innovation and Entrepreneurship Talent program Project No. JSSCRC2021491 . Industry-University-Research Cooperation Project of Jiangsu Province in China , Grant No. BY2021057 . Dr. Asghar thanks the Hubei Talent 100 program and Academy of Finland ( 13329016 , 13322738 ) for their financial support. Publisher Copyright: © 2022 The Authors Electrolytes with high-proton conduction and low activation energy are attractive for reducing the high operating temperature of solid-oxide fuel cells to less than <600 °C. In this work, we have fabricated semiconducting electrolyte SrFeTiO3-δ (SFT) material exhibiting high ionic conduction and exceptionally high protonic conduction at low operating temperature but with low electronic conduction to evade the short-circuiting issue. The prepared fuel cell device exhibited high open-circuit voltage (OCV) and a high-power output of 534 mW/cm2, of which 474 mW/cm2 could be for sure be related to the protonic part. The current study suggests that usage of semiconductor SrFeTiO3-δ facilitates a high concentration of oxygen vacancies on the surface of SFT, which mainly benefits proton conduction. Moreover, lower grain boundary resistance leads to obtain higher performance. Also, the Schottky junction phenomena are proposed to inhibit the e-conduction and excel the ions transportation. The high performance and ionic conductivity suggest that SFT could be a promising electrolyte for protonic ceramic fuel cells. Peer reviewed