• Energy Research
• Open Access close
• Closed Access close
• other engineering and technologies close

The paper presents an experimental study on the formation process of burden surface texture on the blast furnace throat and its influence on the radial distribution of gas flow. The study was performed with the application of blast furnaces equipped with a bell-type charging device using radio-isotope means for the control of burden surface texture (profile) and burden surface level, i.e., gamma locators for burden surface texture. The study was carried out under the conditions of an operating blast furnace in an iron and steel plant using a unique GEOTAPS system for automated control of geometric and temperature parameters of burden material surface on the blast furnace throat. The influence of the surface texture on the gas flow distribution was also investigated. The possibility of a self-stabilization effect for burden surface texture and gas flow in an operating blast furnace under suitable conditions was experimentally proven. As a result of the experimental study performed, four ways of energy-saving technology implementation were determined for the control of blast furnace melting based on the data on the burden surface texture and previously unknown regularities of surface layer formation of burden material on the throat of an operating blast furnace with a bell-type charging device. The main idea of the paper is the development of automated control for the radial distribution of burden material and gas flow using actual or predicted surface texture parameters as important intermediate factors that both describe the process and have a significant simultaneous influence on it.

The Box–Jenkins model is a polynomial model that uses transfer functions to express relationships between input, output, and noise for a given system. In this article, we present a Box–Jenkins linear model for a lithium-ion battery cell for use in electric vehicles. The model parameter identifications are based on automotive drive-cycle measurements. The proposed model prediction performance is evaluated using the goodness-of-fit criteria and the mean squared error between the Box–Jenkins model and the measured battery cell output. A simulation confirmed that the proposed Box–Jenkins model could adequately capture the battery cell dynamics for different automotive drive cycles and reasonably predict the actual battery cell output. The goodness-of-fit value shows that the Box–Jenkins model matches the battery cell data by 86.85% in the identification phase, and 90.83% in the validation phase for the LA-92 driving cycle. This work demonstrates the potential of using a simple and linear model to predict the battery cell behavior based on a complex identification dataset that represents the actual use of the battery cell in an electric vehicle.

Abstract Socio-technical transformations towards low-carbon energy systems are on the way in developed countries. Conversely, developing countries tend to be locked in fossil fuels and foster coal-based energy structures, emphasizing reliable and cost-effective energy provision and sidelining environmental concerns. In this study, we identified and analysed the predominant factors related to coal-based power generation in Bangladesh. We applied a mixed-method approach, initially conducting a systematic literature review and, subsequently, semi-structured expert interviews to identify and validate relevant factors. We then assessed their relative importance using an Analytical Hierarchy Process based on expert judgments. The results of this assessment reveal that socio-economic aspects and environmental issues scored highest, while technological aspects and sector regulations were considered to be less relevant for large-scale coal power implementation. We conclude that future energy policies created in Bangladesh will need to use appropriate legal instruments and address issues such as human displacement and resettlement, low levels of public acceptance, health hazards and environmental pollution. Participative policy frameworks should be deployed in coal plant projects, and active monitoring systems are necessary to reduce the negative consequences associated with increased electrification and energy consumption. To address foreseeable structural challenges, it furthermore will be crucial to explore sustainable alternatives.

Bu çalışma, 1990-2016 döneminde koordineli piyasa ekonomileri için tarımsal katma değerin, orman alanlarının, ekonomik büyümenin ve yenilenebilir ve yenilenemez enerji tüketiminin çevresel kalite üzerindeki etkisini panel Common Corelated Effects (CCE) modelini kullanarak incelemeyi amaçlamaktadır. Panel CCE modelinden elde edilen uzun dönem katsayılara göre orman alanlarının çevre kalitesini arttırdığı, başka bir ifadeyle karbondioksit emisyonunu azalttığı, yenilenemez enerji tüketiminin ve ekonomik büyümenin ise çevre kalitesi üzerinde negatif bir etki oluşturduğu tespit edilmiştir. Ayrıca, incelenen dönemde tarımsal katma değerin ve yenilenebilir enerji tüketiminin çevre kalitesi üzerinde bir etki oluşturmadığı görülmüştür. Son olarak değişkenler arasındaki nedensellik ilişkisi Dumitrescu–Hurlin testi ile araştırılmıştır. Uygulanan nedensellik testi ile tarım ile karbondioksit emisyonları, tarım ile yenilenemez enerji tüketimi, yenilenebilir enerji tüketimi ile yenilenemez enerji tüketimi arasında çift yönlü nedensellik ilişkisi elde edilmiştir.

Abstract The effect of the thermal environment on performance and productivity has been a focus of interest among indoor environmental researchers for nearly a century, but most of that work has been conducted in relative isolation from the cognate disciplines of human performance evaluation. The present review examines thermal environmental effects on cognitive performance research conducted across multiple disciplines. After differentiating performance from productivity, we compare the two dominant conceptual models linking thermal stress to performance; (1) the inverted-U concept and (2) the extended-U relationship. The inverted-U specifies a single optimum temperature (or its corresponding subjective thermal sensation) at which performance is maximised. In contrast, the extended-U model posits a broad central plateau across which there is no discernible thermal effect on cognitive performance. This performance plateau is bounded by regions of progressive performance decrements in more extreme thermal conditions. The contradictions between these opposing conceptual models might derive from various confounding factors at play in their underlying research bases. These include, inter alia, environment-related, task-related, and performer-related factors, as well as their associated two-way and three-way interaction effects. Methodological discrepancies that might also contribute to the divergence of these conceptual models are evaluated, along with the proposed causal mechanisms underlying the two models. The weight of research evidence reviewed in this paper suggests that the extended-U hypothesis fits the relationship between moderate thermal environments and cognitive performance. In contrast to the inverted-U relationship, implemention of the extended-U in indoor climate control implies substantial reductions in building energy demand, since it permits the heating and cooling setpoint deadband to expand across the full width of the thermal comfort zone, or even slightly further during emergencies such as peak demand events on the electricity grid. Use of personal comfort systems can further extend the thermostat setpoint range beyond the comfort zone.

Simulation of air infiltration and ventilation, and heat transfer processes of buildings are combined in a building simulation program called BUS (version 3.2). The program applies and includes an effective sparse matrix solution method for a linear set of equations. A network assumption is adopted for both air flow and thermal simulation. An iterative method, based on the SIMPLE algorithm, is used for airflow simulation, and the lumped capacitance method is selected for thermal simulation. This building simulation program BUS includes mass balance, momentum, and heat balance equations. This makes it possible to lake into consideration the interaction between ventilation and heat transfer processes, obtain more reliable simulation results than previously, and simulate time-dependent processes.

Construction involves the use of significant quantities of raw materials and entails high-energy consumption. For the sake of choosing the most appropriate solution that considers environmental and sustainable concepts, tools such as the integrated value model for sustainable assessment (Modelo Integrado de Valor para una Evaluación Sostenible, MIVES) used in Spain, plays a key role in obtaining the best solution. MIVES is a multi-criteria decision-making method based on the value function concept and the seminars delivered by experts. Such tools, in order to show how they may work, require application to case studies. In this paper, two concrete slabs manufactured with differing reinforcements during the construction of the La Canda Tunnels are compared by means of MIVES. The two concrete slabs were reinforced with a conventional steel-mesh and with polyolefin fibres. This research was focussed on the main aspects affecting the construction. That is to say, the environmental, economic, and social factors were assessed by the method, being of special impact the issues related with maintenance of the structure. The results showed that from the point of view of sustainability, the use of polyolefin fibres provided a significant advantage, mainly due to the lower maintenance required.

The operation of gas generators brings relatively high thermo-mechanical loads on the gas generator structure. The objective of this article is to determine the operating conditions, in terms of mechanical loads at extremely high temperatures in very limited and narrow space, of a multifunctional bulkhead for application on specific kinds of gas generators with back-to-back rotor concept. The paper contains numerical analysis and experimental investigation for determining the loads and behavior of the structure. Numerical analysis indicates that there is significant influence of the Tesla turbine effect on flow parameters. Also, uneven pressure distribution and significant thermal loads are identified. With experimental investigation and subsequent exploitation tests, it was concluded that the presented methodology identifies the operating conditions, truthfully simulates the bulkhead stress state and deformations and that the presented design solution satisfied all demands. Regarding results obtained by these numerical simulations, the innovative design solution for the multifunctional bulkhead was proposed.