• Energy Research
• other engineering and technologies close
• 13. Climate action close
• 12. Responsible consumption close
• 2. Zero hunger close

Abstract A biomass oil/diesel blend was prepared using an emulsion method and combusted in a diesel engine. An injector was then removed and the morphology, composition, and structure of the carbonaceous deposits on the pintle-type nozzle were characterized using a combination of HRTEM, SEM/EDAX, Raman and XRD. Results showed that the carbon deposition of the emulsified fuel with high crystallinity was greater than that of diesel. The agglomerated particulate diameters of the deposited carbon from diesel and emulsified fuel were approximately 10–30 μm and 50 μm, respectively. The carbon deposition mechanism from the emulsified fuel was attributed to the high oxygen content of the groups leading to increased polymerization and subsequent condensation on the nozzle surfaces that was then carbonised.

Abstract A biomass oil/diesel blend was prepared using an emulsion method and combusted in a diesel engine. An injector was then removed and the morphology, composition, and structure of the carbonaceous deposits on the pintle-type nozzle were characterized using a combination of HRTEM, SEM/EDAX, Raman and XRD. Results showed that the carbon deposition of the emulsified fuel with high crystallinity was greater than that of diesel. The agglomerated particulate diameters of the deposited carbon from diesel and emulsified fuel were approximately 10–30 μm and 50 μm, respectively. The carbon deposition mechanism from the emulsified fuel was attributed to the high oxygen content of the groups leading to increased polymerization and subsequent condensation on the nozzle surfaces that was then carbonised.

Vegetable oil and animal fat derived fatty acid methyl esters are commonly known as biodiesel and provide an environment friendly and renewable substitute for the conventional diesel fuel. The present work demonstrates an easy preparation of potassium ion impregnated calcium oxide in nano crystalline form (supported by powder X-ray diffraction and transmission electron microscopic studies) and its application as a solid catalyst for the transesterification of waste cottonseed oil with methanol. The catalyst prepared by impregnating 3.5 wt% of potassium in CaO support was found to show the best catalytic activity among the prepared catalysts. The same catalyst was found to be effective for the complete transesterification of less expensive feedstock, waste cotton seed oil, even in the presence of 10.26 wt% moisture and 4.35 wt% free fatty acid contents. The selected catalyst has also been reused successfully for three catalytic cycles. Few physicochemical properties of the prepared biodiesel sample have been studied and found to be within the acceptable limits of EN 14214 standards.

Vegetable oil and animal fat derived fatty acid methyl esters are commonly known as biodiesel and provide an environment friendly and renewable substitute for the conventional diesel fuel. The present work demonstrates an easy preparation of potassium ion impregnated calcium oxide in nano crystalline form (supported by powder X-ray diffraction and transmission electron microscopic studies) and its application as a solid catalyst for the transesterification of waste cottonseed oil with methanol. The catalyst prepared by impregnating 3.5 wt% of potassium in CaO support was found to show the best catalytic activity among the prepared catalysts. The same catalyst was found to be effective for the complete transesterification of less expensive feedstock, waste cotton seed oil, even in the presence of 10.26 wt% moisture and 4.35 wt% free fatty acid contents. The selected catalyst has also been reused successfully for three catalytic cycles. Few physicochemical properties of the prepared biodiesel sample have been studied and found to be within the acceptable limits of EN 14214 standards.

Sustainability of agro-food supply chains has recently become the subject of greater interest from consumers, firms, governmental organizations and academia as the environment continues to deteriorate. One of the most critical factors influencing the sustainability of an agro-food supply chain is its network design. A particularly challenging aspect in this context is the broad range of influencing indicators associated with the Triple Bottom Line (TBL) of sustainability that need to be considered. However, many of these indicators could not be fully integrated or measured by single-step optimization problems. This paper presents a critical literature review of operational research methods for the design of sustainable supply chains. A novel two-stage hybrid solution methodology is proposed. In the first stage, a partner selection is performed using a hybrid multi criteria decision making based on Analytic Hierarchy Process (AHP) method and the Ordered Weighted Averaging (OWA) aggregation method. The result obtained in the first stage is used in the second stage to develop a multi-objective mathematical model to optimize the design of the supply chain network. This approach allows the simultaneous consideration of all three dimensions of sustainability including carbon footprint, water footprint, number of jobs created and the total cost of the supply chain design. The proposed approach generates a Pareto frontier to aid users in making decisions. Numerical experiments are completed utilizing data from an agro-food company to demonstrate the efficiency and effectiveness of the proposed solution methodology. The analyzes of the numerical results provide important organizational, practical and policy insights on (1) the impact of financial and environmental sustainability on supply chain network design (2) the tradeoff analysis between environmental emission, water footprint, societal implications and associated cost for making informed decision on supply chain investment.

Sustainability of agro-food supply chains has recently become the subject of greater interest from consumers, firms, governmental organizations and academia as the environment continues to deteriorate. One of the most critical factors influencing the sustainability of an agro-food supply chain is its network design. A particularly challenging aspect in this context is the broad range of influencing indicators associated with the Triple Bottom Line (TBL) of sustainability that need to be considered. However, many of these indicators could not be fully integrated or measured by single-step optimization problems. This paper presents a critical literature review of operational research methods for the design of sustainable supply chains. A novel two-stage hybrid solution methodology is proposed. In the first stage, a partner selection is performed using a hybrid multi criteria decision making based on Analytic Hierarchy Process (AHP) method and the Ordered Weighted Averaging (OWA) aggregation method. The result obtained in the first stage is used in the second stage to develop a multi-objective mathematical model to optimize the design of the supply chain network. This approach allows the simultaneous consideration of all three dimensions of sustainability including carbon footprint, water footprint, number of jobs created and the total cost of the supply chain design. The proposed approach generates a Pareto frontier to aid users in making decisions. Numerical experiments are completed utilizing data from an agro-food company to demonstrate the efficiency and effectiveness of the proposed solution methodology. The analyzes of the numerical results provide important organizational, practical and policy insights on (1) the impact of financial and environmental sustainability on supply chain network design (2) the tradeoff analysis between environmental emission, water footprint, societal implications and associated cost for making informed decision on supply chain investment.

Abstract Date biomass is a carbon-rich renewable resource that can be considered a potential carbon-rich substrate for energy generation over anaerobic digestion (AD). However, due to its complex nature, appropriate pretreatment is necessary to achieve a higher methane yield. Hence, the current study was envisioned to evaluate the influence of three different pretreatment strategies, namely acid, alkali, and hydrothermal pretreatment on biochemical methane potential (BMP) of seven diverse sorts of Algerian date biomass, namely Pedicels, Fibrilium, Petiole, Fruit bunch, Spath, Palm, and its mixture. Among all the pretreatment conditions, alkaline pretreatment highly influenced the lignin composition of date biomass and showed higher BMP. Among all sorts of biomass, higher BMP was detected through Palm as 295.9 mL CH4/g-TS, whereas the lowest BMP values were recorded with Petiole as 226.74 mL CH4/g-TS. Among all the experimental variations, ammonium pretreated Palm biomass documented the highest substrate conversion efficiency (63.80%), which correlates well with the observed higher BMP values. Nevertheless, there was a very marginal improvement in BMP detected in the case of other pretreatment strategies compared to alkaline pretreatment. This might be due to the efficacy of the applied pretreatment method on delignification of date biomass.

Abstract Date biomass is a carbon-rich renewable resource that can be considered a potential carbon-rich substrate for energy generation over anaerobic digestion (AD). However, due to its complex nature, appropriate pretreatment is necessary to achieve a higher methane yield. Hence, the current study was envisioned to evaluate the influence of three different pretreatment strategies, namely acid, alkali, and hydrothermal pretreatment on biochemical methane potential (BMP) of seven diverse sorts of Algerian date biomass, namely Pedicels, Fibrilium, Petiole, Fruit bunch, Spath, Palm, and its mixture. Among all the pretreatment conditions, alkaline pretreatment highly influenced the lignin composition of date biomass and showed higher BMP. Among all sorts of biomass, higher BMP was detected through Palm as 295.9 mL CH4/g-TS, whereas the lowest BMP values were recorded with Petiole as 226.74 mL CH4/g-TS. Among all the experimental variations, ammonium pretreated Palm biomass documented the highest substrate conversion efficiency (63.80%), which correlates well with the observed higher BMP values. Nevertheless, there was a very marginal improvement in BMP detected in the case of other pretreatment strategies compared to alkaline pretreatment. This might be due to the efficacy of the applied pretreatment method on delignification of date biomass.