• Energy Research
• other engineering and technologies close
• 7. Clean energy close
• 13. Climate action close
• 11. Sustainability close
• 2. Zero hunger close

Abstract The central role of occupants for achieving energy savings in residential buildings is increasingly recognised. Simulation programmes able to take into account occupant behaviour are considered to be powerful tools for bridging the gap between the predicted and the actual energy consumption for new buildings. Nevertheless, the majority of residential buildings that will constitute the housing stock in 2050 have already been built today, therefore occupant behaviour and building simulation tools need to be fully exploited for supporting the renovation of existing housing stock. The aim of this paper is to explore the role of occupant behaviour modelling in supporting decision-makers dealing with the design of renovation strategies for residential buildings. An Italian multi-family public housing building is assumed as case study to estimate the influence of three dimensions linked with occupant behaviour – management of the thermostat, management of the heating system, variation of building characteristics – on energy heating consumption. The results show that, while the occupant behaviour influences the heating loads up to 1/3 in case of high level of building retrofit, the less the building is renovated, the higher is the behavioural impact in absolute terms of energy reduction. Therefore, in order to be effective, renovation strategies are required to design appropriate informative instruments at an early stage to support behaviour changes towards responsible energy consumption.

The main objective of this paper is to illustrate the current state of the art of the newborn smart gas grid concept. We provide a detailed discussion of the envisaged features of the smart gas grid, giving attention to both the related academic literature and to the ongoing world-wide projects. In doing so, we also discuss the potentialities of rethinking the smart grid paradigm from the perspective of a whole energy system, that both encompasses the electrical and the gas grid, and identify some critical key aspects that must be handled while developing the new smart energy paradigm.

In this study, the thermal performance of a compact heat sink thermoelectric cooling module with water, nanofluid, and ferrofluid as the coolants is investigated experimentally. The TiO2 nanofluid and Fe3O4 ferrofluid were tested at concentrations of 0.005% and 0.015%, respectively. The dummy battery pack was filled with water under a constant temperature and represented as a heat load. The results reveal that the Fe3O4 ferrofluid showed a maximum heat transfer rate 11.17% and 12.57% higher, respectively, than that of the TiO2 nanofluid and water. The TiO2 nanofluid and Fe3O4 ferrofluid with a 0.015% concentration enhanced the Peltier effect by lowering the contribution of the Fourier effect of the thermoelectric cooler (TEC), decreasing the temperature difference of the TEC cooling module by 4.6% and 9.6%, respectively, which decreases the thermal resistance of the heat sink by 7% and 14%, respectively. More importantly, the use of nanofluids and ferrofluids with a 0.015% concentration as coolants increased the pressure drop significantly, by 0.5 kPa and 2.7 kPa, respectively, compared with water.

Heavy Metals Content Pb, Cd, Cu, Zn And Ni In Sea Water And Sediment In Membramo Estuary And Its Relationship With Fishery Cultivation. Obervation on heavy metals Pb, Cd, Cu, Zn and Ni content in Jakarta Bay were carried out in August 2003. The results showed that the Pb, Cd, Cu, Zn, and Ni content still in line with threshold value stated by for fisheries. By the all, in sea water Zn content is higher compared to the others, while in sediment Ni is higher. This data showed the result show that on waters of Membramo River Zn and Ni waste than others elements. Keywords: Membramo, heavy metals, fisheries.

Abstract A bilinear proportional-integral (PI) controller based on passivity-based formulations for integrating superconducting magnetic energy storage (SMES) devices to power ac microgrids is proposed in this paper. A cascade connection between a dc–dc chopper and a voltage source converter is made to integrate the SMES system. The proposed controller guarantees asymptotically stability in the Lyapunov's sense under closed-loop operation. This controller exploits the well-known advantages of the proportional-integral (PI) actions via passivation theory. Active and reactive power compensation in the ac system through the SMES integration is proposed as the control objective. To achieve this goal, a radial ac distribution feeder with high penetration of distributed energy resources and time-varying loads is employed. The effectiveness and the robustness of the proposed bilinear PI controller verified by comparing its dynamical performance to conventional approaches such as conventional PI and feedback controllers. All simulation results are conducted via MATLAB/SIMULINK software by using SimPowerSystem library.

Abstract The combination of biomass gasification with fuel cells, especially high temperature Solid Oxide Fuel Cells (SOFCs) promises sustainable and highly efficient (decentralized and modular) energy conversion systems. This review encompasses the components of biomass integrated gasification–SOFC technology including biomass characteristics, the thermochemical conversion in gasifiers and the factors affecting the gasification process, the cleaning technologies for raw producer gas and its conditioning and finally the integration of gasifier with SOFCs. The influence of impurities present in biomass producer gas such as particulates, tar, H 2 S, HCl and alkali compounds based on recent experimental studies and their tolerance limits towards SOFCs are presented. Even though analysis based on the probable tolerance limits of impurities towards SOFCs and a comprehensive overview of the cleaning technologies for producer gas impurities indicate that producer gas cleaning at various temperatures using current technologies to meet SOFC requirements is possible, more experimental studies are still needed to acquire the detailed information on the tolerance limits of impurities for SOFCs. The recent theoretical modeling and experimental studies of biomass integrated gasification–SOFC systems are also presented.

Abstract In the current study, a new solar-driven triple cycle is proposed to allow power generation during low insolation periods. This triple cycle integrates the solar gas-turbine top cycle, the steam Rankine cycle, and the Kalina bottom cycle. During the top cycle of the proposed system, compressed air was heated to 1000 °C or higher in the solar tower receiver. The heated compressed air was then used to drive the gas turbine to generate electricity. A Rankine cycle with a back-pressure steam turbine was utilized to recover waste heat from the gas turbine, thereby generating electricity through the steam turbine. The bottom cycle is the Kalina cycle, which comprises another back-pressure turbine and utilizes ammonia–water mixture as working fluid. After driving the steam Rankine cycle, the flue gas from the gas turbine sequentially heats the ammonia–water mixture to produce power. A new operational strategy was presented to generate electricity during low insolation period without the backup of fossil fuel. In middle insolation periods, the air is heated by the solar field and then directly drives the steam Rankine cycle, bypassing the gas turbine. In low insolation periods, the heated air directly drive the Kalina cycle, bypassing the Brayton cycle and the steam Rankine cycle. The off-design performance was investigated and the irreversibility was disclosed with the aid of the energy-utilization diagram method. Thus, the proposed system can utilize low insolation to generate electricity. This study provides a possibility to improve the solar–electric efficiency.

This article takes as a case study a provincial city in an attempt to analyse the dynamics of location, creation and extension of the high schools of Metz, from the imperial high school to the current high schools, including those built during the annexation of the city to Germany (1871-1919), the remarkable extensions of the inter-war period, and finally the industrialised constructions of the “Trente Glorieuses”, the 30 years of post-war economic boom in France. This transversal reading of public buildings within a defined communal territory inevitably fits into a perspective between the local and the national, for example in the choice of the architects behind these constructions. Covering nearly two centuries, this article highlights the history of these buildings, emphasising the context of their construction and their evolution.