• Energy Research
• Restricted close
• other engineering and technologies close
• 13. Climate action close
• 11. Sustainability close

The design and assessment of net-zero buildings commonly focus exclusively on the operational phase, ignoring the embodied environmental impacts over the building life cycle. An analysis is presented on the consequences of integrating embodied impacts into the assessment of the environmental advantageousness of net-zero concepts. Fundamental issues needing consideration in the design process - based on the evaluation of primary energy use and related greenhouse gas emissions - are examined by comparing three net-zero building design and assessment cases: (1) no embodied impacts included, net balance limited to the operation stage only; (2) embodied impacts included but evaluated separately from the operation stage; and (3) embodied impacts included with the operation stage in a life cycle approach. A review of recent developments in research, standardization activities and design practice and the presentation of a case study of a residential building in Norway highlight the critical importance of performance indicator definitions and system boundaries. A practical checklist is presented to guide the process of incorporating embodied impacts across the building life cycle phases in net-zero design. Its implications are considered on overall environmental impact assessment of buildings. Research and development challenges, as well as recommendations for designers and other stakeholders, are identified.

The building and construction sector is a large contributor to anthropogenic greenhouse gas emissions and consumes vast natural resources. Improvements in this sector are of fundamental importance for national and global targets to combat climate change. In this context, vertical greenery systems (VGS) in buildings have become popular in urban areas to restore green space in cities and be an adaptation strategy for challenges such as climate change. However, only a small amount of knowledge is available on the different VGS environmental impacts. This paper discusses a comparative life cycle assessment (LCA) between a building with green walls, a building with green facades and a reference building without any greenery system in the continental Mediterranean climate. This life cycle assessment is carried according to ISO 14040/44 using ReCiPe and GWP indicators. Moreover, this study fills this gap by thoroughly tracking and quantifying all impacts in all phases of the building life cycle related to the manufacturing and construction stage, maintenance, use stage (operational energy use experimentally tested), and final disposal. The adopted functional unit is the square meter of the facade. Results showed that the operational stage had the highest impact contributing by up to 90% of the total environmental impacts during its 50 years life cycle. Moreover, when considering VGS, there is an annual reduction of about 1% in the environmental burdens. However, in summer, the reduction is almost 50%. Finally, if the use stage is excluded, the manufacturing and the maintenance stage are the most significant contributors, especially in the green wall system.

It is well known that the efficiency of PV modules decreases with increasing module temperatures. Many studies have paid attention to the development and validation of heuristic models to calculate the PV module temperature in higher latitudes, however only a few focus on the thermal behaviour of PV modules in tropical regions of the world, where constantly high temperatures prevail. Also, little is known about the effect of including wind speed in these thermal models. This study evaluates three of such models - one that excludes wind, and two others including the wind influence - using hourly data for two tropical locations. Results show that the average hourly wind speeds in Singapore and Jayapura (Indonesia) are low and therefore the influence of the wind on the PV module temperature is minor. The three evaluated models produce about the same results with RMSE between 1.5-3.8 °C during daytime, which corresponds to a deviation in power output in the range of 0.3-1.6 %, depending on the PV module technology.

<div class="section abstract"><div class="htmlview paragraph">The introduction of new light-duty vehicle emission limits to comply under real driving conditions (RDE) is pushing the diesel engine manufacturers to identify and improve the technologies and strategies for further emission reduction. The latest technology advancements on the after-treatment systems have permitted to achieve very low emission conformity factors over the RDE, and therefore, the biggest challenge of the diesel engine development is maintaining its competitiveness in the trade-off “CO₂-system cost” in comparison to other propulsion systems. In this regard, diesel engines can continue to play an important role, in the short-medium term, to enable cost-effective compliance of CO₂-fleet emission targets, either in conventional or hybrid propulsion systems configuration. This is especially true for large-size cars, SUVs and light commercial vehicles.</div><div class="htmlview paragraph">In this framework, a comprehensive approach covering the whole powertrain is of primary importance in order to simultaneously meet the performance, efficiency, noise and emission targets, and therefore, further development of the combustion system design and injection system represent important levers for additional improvements. For this purpose, a dedicated 0.5 dm³ single-cylinder engine has been developed and equipped with, a state-of-the-art Euro 6 combustion system, and an advanced common rail fuel injection system (FIS) offering higher flexibility in terms of injection strategy and higher quantity accuracy. Three injector nozzles with different hydraulic flow rates (HF) have been selected and employed for the overall combustion process optimization.</div><div class="htmlview paragraph">The optimization has been performed by means of an extensive DoE-based test campaign in which the engine and FIS operating parameters have been parametrized with the aim to carry out a proper combination in terms of HF and injection strategy. The results at partial load conditions evidence significant advantages in applying an advanced injection pattern, while the HF reduction can significantly improve the smoke emission and combustion noise without fuel consumption penalties. Therefore, a proper combination and optimization of the HF and injection strategy can provide low noise and engine-out smoke while maintaining the rated power performance targets.</div></div>

A Life Cycle Assessment (LCA) with focus on carbon footprint, followed by Life Cycle Costing (LCC) of municipal solid waste (MSW) management were conducted in a residential area of a medium-sized European city of 80,000 inhabitants. The initial results showed high environmental impacts and lack of economic sustainability, due to the high amounts of waste landfilled, the low extent of separate collection, low performance of mechanical-biological treatment as well as absence from alternatives to landfilling of non-recyclable materials. Taking this result as a baseline scenario, three improvement.s were tested with the aim of turning the carbon footprint of the local MSW management system into a neutral value: (i) increased separate collection of recyclables, (ii) enhanced biogas production and (iii) refuse-derived fuel (RDF) production. Successively adding the improvements, three alternative improved scenarios were defined, until reaching a negative carbon footprint, meaning that an optimised system would avoid GHG emissions. The proposed changes were sufficient to achieve carbon neutrality, as well as reduce overall environmental impacts, but were not enough for achieving economic sustainability due to the great influence of collection costs, especially for separate collection. It was concluded that by using an adequate combination of several treatment options and increasing the separate collection of recyclable materials it is possible to turn MSW management into a carbon neutral activity as well as improve its economic balance.

Abstract One of the critical areas in the outer shell of household refrigerators is the compressor compartment, which has relatively high temperatures, due to the heat generated while the compressor is running. This implies a larger heat transfer to the interior air volume and, consequently, more energy consumption. One way to decrease this temperature is to ventilate the base of the refrigerator with a small fan. In the research carried out, a decrease of 11 °C in the temperature of the surfaces close to the compressor was recorded, when the fan was running. The implications of this effect can be seen at two levels: changes in the temperature distribution at the bottom of the refrigerator envelope and the resulting dynamic effects, and a decrease in energy consumption of the entire system. Consequently, there are lower CO 2 emissions to the environment, making household refrigerators more efficient and sustainable.

Abstract Mediterranean islands have the advantage of favourable climatic conditions to use different marine renewable energy sources. Remote sensing can provide data to determine wind energy production potential and observational activity to identify, assess and detect suitable points in large marine areas. In this paper, a new combined model has been developed to integrate wind speed assessment, mapping and forecasting using Sentinel 1 satellite data through images processing and Adaptive Neuro-Fuzzy Inference System and the Bat algorithm. Synthetic Aperture Radar (SAR) satellite images from the Sentinel 1 satellite have been used in order to detect offshore and nearshore wind potential. Particularly, Sentinel 1 images have been analysed by means of the SNAP software. Then, to extract data about wind speed and direction, a GIS software for mapping the wind climate has been used. This new methodology has been applied to the North-Central coasts of Sardinia Island and then focused on six main small islands of La Maddalena archipelago. Furthermore, ten Hot Spots (HSs) have been identified as interesting because of their high-energy potential and the possibility to be considered as sites for future implementation of Wind Turbine Generators (WTGs). Finally, the ten identified HS have been used as input data to train and test the proposed forecast model.

In the present work, the supercritical water gasification (SCWG) of biomass is analyzed with a view to outlining the possible thermodynamic constraints that must be taken into account to develop this new process. In particular, issues concerning the formation of solid carbon and the process heat duty are discussed. The analysis is conducted by means of a two-phase non-stoichiometric thermodynamic model, based on Gibbs free energy minimization. Results show that char formation at equilibrium only occurs at high biomass concentrations, with a strong dependence on biomass composition. As regards the process heat duty, SCWG is mostly endothermic when biomass concentration is low, although a very small amount of oxidizing agent is able to make the process exothermic, with only a small loss in the heating value of the syngas produced.