• Energy Research
• 2016-2025close
• natural sciences close
• social sciences close

AbstractNovel methods for the preparation of metal‐supported materials are desired for better catalytic performance and selectivity. In this article, Ni supported on multiwall nanotubes (Ni/MWNTs) is synthesized with electrodeposition method for electrocatalytic CO2 reduction reaction (CO2RR). The sample drying time after electrodeposition is found critical to oxidize Ni for better activity, and higher Ni oxidation state is required for CO2RR. The loading effect study proves that higher current density is achieved from small Ni clusters than that from large nano particles. This work provides a pioneer approach to synthesize small Ni clusters using electrodeposition method for electrocatalytic CO2 conversion.

Abstract Microorganisms used in syngas fermentation require nutrients to grow and convert syngas (CO, H2 and CO2) into various products. Many of the essential nutrients can be provided by biochar. Poultry litter biochar (PLBC) contains minerals and trace metals and has a high pH buffering capacity, making it suitable as a nutrient supplement. The effects of PLBC loadings from 1 to 20 g L−1 on syngas fermentation were determined in 250 ml bottle assays. Results showed that 10 and 20 g L−1 PLBC significantly increased ethanol production compared to standard yeast extract (YE) medium. Fermentations in a 3L continuous stirred tank reactor (CSTR) with 10 g L−1 PLBC with and without 4-morpholineethanesulfonic acid (MES) showed 64% and 36% more ethanol production, respectively, than standard medium. The acetic acid accumulated at the beginning of fermentation was completely converted to ethanol in all media tested in the CSTR. These results demonstrate the feasibility of using PLBC medium without costly MES in the CSTR to enhance ethanol production from syngas for potential use at commercial scale.

A template‐agent can affect defect formation as well as influence interface properties, due to the rapid growth of perovskite film from the solution. Herein, diethylammonium iodide (DAI) is used as an effective template‐agent to control the perovskite crystallization during preparation. It is found that a very small amount of DAI in chlorobenzene (CB) can slow down the perovskite growth of the CH3NH3PbI3 (MAPbI3) film with more large grain size and compacted crystal‐grains resulting in the lesser grain boundaries (GBs) in favor of carrier transport in perovskite solar cells (PSCs). Moreover, some redundant PbI2 can be digested to form DA2PbI4. One part of DA2PbI4 can form the sub‐grains with the composition of (DA2PbI4)0.2(PbI2)0.8 to passivate the GB defects, and other part can cover the surface to passivate the surface defects in large MAPbI3 grains. Using an optimized DAI concentration of 0.5 mg mL−1 in CB solution, the corrsponding MAPbI3 PSC achieves an increased power conversion efficiency of 20.31% with suppressed current–voltage hysteresis. This DAI passivation strategy provides a simple approach to effectively assist the grain‐growth for improved device performance.

Abstract To obtain high yield and high concentration glucose from corncob residues (CRs), tetrahydrofuran (THF) + H2O co-solvent pretreatment was employed. The pretreatment parameters were firstly optimized by Box-Behnken Design of response surface method, and the maximum glucose yield (498.2 mg/g CRs) was obtained via enzymatic hydrolysis after pretreated under optimized conditions (53.7% THF concentration, 202.3 °C, 1.05 h). Then, the pretreated CRs under optimized conditions (optimized-CRs) were enzymatically hydrolyzed at high solid loading (15%–20%) and low enzyme input (5–8 FPU/g cellulose). The high concentration glucose production (128.6 mg/mL) was obtained from optimized-CRs after enzymatic hydrolysis at 20% solid loading with 10 FPU/g cellulose for 72 h, and then showed potential for reduction of enzyme input. Finally, the interactions between the 9 substrate-related factors and cellulose conversion were analyzed through correlation analysis, and found that Klason lignin remained in the cellulose-rich fractions and pseudo lignin condensed on the surface of the recovered substrate were the predominant inhibitors for enzymatic hydrolysis.

Building, bridge or wind turbine maintenance requires manual dexterity tasks by a specialist rope-access trained workforce via two principal means: harness suspension of individual workers from above, or deployment of a suspended platform or cradle from which workers access the structure to be maintained. Currently no published research compares accuracy and efficiency of simulated maintenance tasks between these modalities. This study investigated manual dexterity task performance of peg placement and shape delineation in seated, standing and suspended environments in 16 healthy controls and 26 professional rope-access trained individuals. Both seated and standing assessments were superior to those suspended, and height of suspension, total mass and years of experience had no influence on the task outcome. These findings suggest that, where feasible, cradle suspension mechanisms which permit standing maintenance are favourable in terms of task efficacy and where feasible, should be considered for deployment in wind energy and other engineering applications.

Plastic film mulching (FM) became a general practice to enhance crop productivity and its net primary production (NPP), but it can increase greenhouse gas (GHG) emissions. The proper addition of organic amendments might effectively decrease the impact of FM on global warming. To evaluate the feasibility of biomass addition on decreasing this negative influence, cover crop biomass as a green manure was incorporated with different recycling levels (0-100% of aboveground biomass) under FM and no-mulching. The net global warming potential (GWP) which integrated with soil C stock change and GHG (N2O and CH4) fluxes with CO2-equivalent was evaluated during maize cultivation. Under the same biomass incorporation, FM significantly enhanced the grain productivity and NPP of maize by 22-61 and 18-58% over no-mulching, respectively. In contrast, FM also highly increased the respired C loss, which was 11-95% higher than NPP increase, over no-mulching. Irrespective with biomass recycling ratio and mulching system, negative NECB which indicates the decrease of soil C stock was observed, mainly due to big harvest removal. FM decreased more soil C stock by 57-158% over no-mulching, but its C stock was clearly increased with increasing biomass addition. FM significantly increased total N2O and CH4 fluxes by 4-61 and 140-600% over no-mulching, respectively. Soil C stock changes mainly decided net GWP scale, but N2O and CH4 fluxes negligibly influenced. As a result, FM highly increased net GWP over no-mulching, while this net GWP was clearly decreased with increasing biomass application. However, cover cropping, and its biomass recycling was not enough to compensate the negative impact of FM on global warming. Therefore, more biomass incorporation might be essential to compensate this negative effect of FM.

The territorial approach is the basic approach to a region management. At the same time, the “territory” component is the basis of the logistics complex used in Supply Chain Management. In this regard, a need is to clarify and supplement the theory and methodology of the territorial approach to the management of both the region and the supply chains.The subject of this study is the relationship between the regional authorities and the focus enterprise of the supply chain regarding the development of the territories and resources of the region on a mutually beneficial basis.The research methods are methods of analysis and synthesis, induction and deduction, as well as classification, and the tools are binary matrices that provide for the joint use of two classification attributes of the object under study and their dichotomies.The results of this study are the management principles by the competitiveness and sustainability of the management object; classifications of approaches to the management by the region and supply chains; of territories from the point of view of the focus enterprise of the supply chain and the region; the management decisions in the interaction of regions with the links of supply chains; the sequence of the formation of supply chains and the development of territories and resources of the region on the basis of the territorial approach and the relationship between them.The obtained results allow to reduce the costs and time for the development of territories and resources of the region by reducing the lost profits of the supply chain links due to their rational placement and increasing sustainability by achieving a synergistic effect both by the region and by the supply chains.

AbstractRevolutionary changes in energy storage technology have put forward higher requirements on next‐generation anode materials for lithium‐ion battery. Recently, a new class of materials with complex stoichiometric ratios, high‐entropy oxide (HEO), has gradually emerging into sight and embracing the prosperity. The ideal elemental adjustability and attractive synergistic effect make HEO promising to break through the integrated performance bottleneck of conventional anodes and provide new impetus for the design and development of electrochemical energy storage materials. Here, the research progress of HEO anodes is comprehensively reviewed. The driving force behind phase stability, the role of individual cations, potential mechanisms for controlling properties, as well as state‐of‐the‐art synthetic strategies and modification approaches are critically evaluated. Finally, we envision the future prospects and related challenges in this field, which will bring some enlightening guidance and criteria for researchers to further unlock the mysteries of HEO anodes.image