• Energy Research

The IPCC 2021 report predicts rising global temperatures and more frequent extreme weather events in the future, which will have different effects on the regional climate and concentrations of ambient air pollutants. Consequently, changes in heat and mass transfer between the inside and outside of buildings will also have an increasing impact on indoor air quality. It is therefore surprising that indoor spaces and occupant well-being still play a subordinate role in the studies of climate change. To increase awareness for this topic, the Indoor Air Quality Climate Change (IAQCC) model system was developed, which allows short and long-term predictions of the indoor climate with respect to outdoor conditions. The IAQCC is a holistic model that combines different scenarios in the form of submodels: building physics, indoor emissions, chemical-physical reaction and transformation, mold growth, and indoor exposure. IAQCC allows simulation of indoor gas and particle concentrations with outdoor influences, indoor materials and activity emissions, particle deposition and coagulation, gas reactions, and SVOC partitioning. These key processes are fundamentally linked to temperature and relative humidity. With the aid of the building physics model, the indoor temperature and humidity, and pollutant transport in building zones can be simulated. The exposure model refers to the calculated concentrations and provides evaluations of indoor thermal comfort and exposure to gaseous, particulate, and microbial pollutants.

Moisture related damage is still a formidable cost factor in the building sector. Besides installation deficiencies, moisture control design failures are the most frequent reasons for moisture problems. Therefore, adequate moisture control analysis has become the key for sustainable buildings. However, by focusing on vapour diffusion only other important moisture loads such as driving rain, construction moisture or air infiltration are mostly neglected. Therefore, international moisture control standards often refer to simulation models for more realistic analysis, leaving many practitioners wondering how to handle these tools. To overcome this dilemma, the updated German moisture control standard has introduced a three-pathway approach for design evaluation: 1 st deemed to satisfy list, 2 nd restricted Glaser calculation and 3 rd fully fledged hygrothermal simulation. The third pathway includes the option to account for small leaks or imperfections in building envelope components. Guidelines in other countries are also embracing similar moisture control approaches which gives hope for more durable and sustainable building design. To reach this aim, moisture control should also become an integral part of the design process instead of a secondary chore.

To reduce greenhouse gas emissions, nations have introduced energy efficiency regulations for new and existing buildings. This has been considered advantageous as more efficient building envelopes would reduce energy consumed to heat and cool home interiors to within accepted thermal comfort bandwidths. However, as these methods have been adopted, many nations have identified an unintended visible presence of surface and interstitial condensation and mould in new code-compliant buildings. In Australia, it has been estimated that up to 50% of Australian houses constructed in the last decade (2006–2016) have a presence of condensation and mould. Australia introduced its first condensation and mould-related building regulations for new homes in 2019. This paper reports on the hygrothermal and mould growth analysis of the most common low-rise residential external wall system, a timber-framed clay masonry veneer wall. A key component of this paper discusses the application of innovative methods in the Australian context. The external wall’s moisture accumulation and mould growth were simulated for a period of ten years using the transient hygrothermal simulation tool, WUFI® Pro, and the mould growth model, WUFI® VTT. This study identified significant risks for this typical external wall system when constructed in a temperate climate.

Hygrothermal simulations have become essential for sustainable and resilient building design because moisture is the major cause of problems in buildings. Appropriate meteorological input data are important to obtain meaningful simulation results. Therefore, this article reviews different methods to create Hygrothermal Reference Years (HRY) as severe or average climate inputs. The current standards define HRYs solely based on outdoor temperature, although moisture problems are caused by a combination of climate parameters, including driving rain and other loads. Therefore, there are also methods considering several impact parameters. The existing methods can be classified into two categories: construction-independent and construction-dependent methods. The former determines HRY based on a weather data analysis and is useful for large-scale parametric studies comprising many climatic parameters acting on buildings. The latter is based in addition to computer simulations to verify the HRY also in the context of specific construction types. It is a more comprehensive approach since the moisture responses of constructions are the decisive outcome for performance predictions. The advantages and disadvantages of the different methods are summarized and compared. Lastly, further research questions and simplifications aimed at practitioners are pointed out to arrive at reliable hygrothermal building performance predictions.

This paper reports on collaborative activities to promote energy- and resource-efficient construction practices in Vietnam. First, the governance framework was introduced, including government decrees and technical standards. Then, a laboratory with building physics measurement technology was designed and partly set up at the local partner, the Vietnam Institute for Building Materials (VIBM). This can be used to determine the essential characteristic values required for the implementation of energy standards. The requirements of the national technical regulation on energy-efficient buildings of Vietnam—QCVN09:2017/BXD—form the basis for the prioritization of characteristic values. Furthermore, the description of basic characteristic values from international standards can also be used for calculations to optimize the energy consumption of buildings. To carry out transient hygrothermal computer simulations, special characteristic values are also included. These are particularly useful for the research and development of new building materials and the evaluation of entire buildings in terms of thermal and moisture protection. In this way, the practical means for implementing governance instruments are provided, and the associated technical applications are supported. Based on the example of Vietnam, this paper indicates how a developing country can develop a road map for improving its systems for testing, rating, and labeling building materials for energy performance towards sustainable development.

As energy-efficient buildings become central to climate change mitigation, the opportunity for interior and interstitial moisture accumulation and mould growth can increase. This study investigated the potential simulation-based mould growth risks associated with the current generation of insulated low-rise timber framed external wall systems within southeastern Australia. More than 8000 hygrothermal and bio-hygrothermal simulations were completed to evaluate seasonal moisture patterns and calculate mould growth potential for nine typical external wall systems. Results reveal that the combination of increased thermal insulation and air-tightness measures between the 2010 and 2022 specified building envelope energy efficiency regulations further increased predicted Mould Index values, particularly in cool-temperate climates. This was in part due to insufficient moisture management requirements, like an air space between the cladding and the weather resistive layer and/or the low-water vapour permeability of exterior weather resistive pliable membranes. By contrast, warmer temperate climates and drier cool-temperate climates exhibit consistently lower calculated Mould Index values. Despite the 2022 requirement for a greater water vapour-permeance of exterior pliable membranes, the external walls systems explored in this research had a higher calculated Mould Index than the 2010 regulatory compliant external wall systems. Lower air change rates significantly increased calculated interstitial mould growth risk, while the use of interior vapour control membranes proved effective in its mitigation for most external wall systems. The addition of ventilated cavity in combination with either or both an interior vapour control membrane and a highly vapour-permeable exterior pliable membranes further reduced risk. The findings underscore the need for tailored, climate-responsive design interventions to minimise surface and interstitial mould growth risk and building durability, whilst achieving high performance external wall systems.