• Energy Research
• 2021-2025close

This work evaluated the effects of condensable syngas impurities on the cell viability and product distribution of Butyribacterium methylotrophicum in syngas fermentation. The condensates were collected during the gasification of two technical lignins derived from wheat straw (WST) and softwood (SW) at different temperatures and in the presence or absence of catalysts. The cleanest syngas with 169 and 3020 ppmv of H2S and NH3, respectively, was obtained at 800 °C using dolomite as catalyst. Pyridines were the prevalent compounds in most condensates and the highest variety of aromatics with cyanide substituents were originated during WST lignin gasification at 800 °C without catalyst. In contrast with SW lignin-based condensates, the fermentation media supplemented with WST lignin-derived condensates at 1:100 vol. only supported residual growth of B. methylotrophicum. By decreasing the condensate concentration in the medium, growth inhibition ceased and a trend toward butyrate production over acetate was observed. The highest butyrate-to-acetate ratio of 1.3 was obtained by supplementing the fermentation media at 1:1000 vol. with the condensate derived from the WST lignin, which was gasified at 800 °C in the presence of olivine. B. methylotrophicum was able to adapt and resist the impurities of the crude syngas and altered its metabolism to produce additional butyrate.

Energy crops are dedicated cultures directed for biofuels, electricity, and heat production. Due to their tolerance to contaminated lands, they can alleviate and remediate land pollution by the disposal of toxic elements and polymetallic agents. Moreover, these crops are suitable to be exploited in marginal soils (e.g., saline), and, therefore, the risk of land-use conflicts due to competition for food, feed, and fuel is reduced, contributing positively to economic growth, and bringing additional revenue to landowners. Therefore, further study and investment in R&D is required to link energy crops to the implementation of biorefineries. The main objective of this study is to present a review of the potential of selected energy crops for bioenergy and biofuels production, when cultivated in marginal/degraded/contaminated (MDC) soils (not competing with agriculture), contributing to avoiding Indirect Land Use Change (ILUC) burdens. The selected energy crops are Cynara cardunculus, Arundo donax, Cannabis sativa, Helianthus tuberosus, Linum usitatissimum, Miscanthus × giganteus, Sorghum bicolor, Panicum virgatum, Acacia dealbata, Pinus pinaster, Paulownia tomentosa, Populus alba, Populus nigra, Salix viminalis, and microalgae cultures. This article is useful for researchers or entrepreneurs who want to know what kind of crops can produce which biofuels in MDC soils.

Hybrid bio-thermochemical based technologies have the potential to ensure greater feedstock flexibility for the production of bioenergy and bioproducts. This study focused on the bioconversion of syngas produced from low grade technical lignin to C2-/C4-carboxylic acids by Butyribacterium methylotrophicum. The effects of pH, medium supplementation and the use of crude syngas were analyzed. At pH 6.0, B. methylotrophicum consumed CO, CO2 and H2 simultaneously up to 87 mol% of carbon fixation, and the supplementation of the medium with acetate increased the production of butyrate by 6.3 times. In long-term bioreactor experiments, B. methylotrophicum produced 38.3 and 51.1 mM acetic acid and 0.7 and 2.0 mM butyric acid from synthetic and lignin syngas, respectively. Carbon fixation reached 83 and 88 mol%, respectively. The lignin syngas conversion rate decreased from 13.3 to 0.9 NmL/h throughout the assay. The appearance of a grayish pellet and cell aggregates after approximately 220 h was indicative of tar deposition. Nevertheless, the stressed cells remained metabolically active and maintained acetate and butyrate production from lignin syngas. The challenge that impurities represent in the bioconversion of crude syngas has a direct impact on syngas cleaning requirements and operation costs, supporting the pursuit for more robust and versatile acetogens.

A methodology was developed to assess the allocation of different types of endogenous waste biomass to eight technologies for producing electricity, heat, biogas and advanced biofuels. It was based on the identification of key physicochemical parameters for each conversion process and the definition of limit values for each parameter, applied to two different matrices of waste biomass. This enabled the creation of one Admissibility Grid with target values per type of waste biomass and conversion technology, applicable to a decision process in the routing to energy production. The construction of the grid was based on the evaluation of 24 types of waste biomass, corresponding to 48 sets of samples tested, for which a detailed physicochemical characterization and an admissibility assessment were made. The samples were collected from Municipal Solid Waste treatment facilities, sewage sludges, agro-industrial companies, poultry farms, and pulp and paper industries. The conversion technologies and energy products considered were (trans)esterification to fatty acid methyl esters, anaerobic digestion to methane, fermentation to bioethanol, dark fermentation to biohydrogen, combustion to electricity and heat, gasification to syngas, and pyrolysis and hydrothermal liquefaction to bio-oils. The validation of the Admissibility Grid was based on the determination of conversion rates and product yields over 23 case studies that were selected according to the best combinations of waste biomass type versus technological solution and energy product.

Synthesis gas (syngas) fermentation is a biological carbon fixation process through which carboxydotrophic acetogenic bacteria convert CO, CO2, and H2 into platform chemicals. To obtain an accurate overview of the syngas fermentation research and innovation from 2012 to 2022, a systematic search was performed on Web of Science and The Lens, focusing on academic publications and patents that were published or granted during this period. Overall, the research focus was centered on process optimization, the genetic manipulation of microorganisms, and bioreactor design, in order to increase the plethora of fermentation products and expand their possible applications. Most of the published research was initially funded and developed in the United States of America. However, over the years, European countries have become the major contributors to syngas fermentation research, followed by China. Syngas fermentation seems to be developing at “two-speeds”, with a small number of companies controlling the technology that is needed for large-scale applications, while academia still focuses on low technology readiness level (TRL) research. This systematic review also showed that the fermentation of raw syngas, the effects of syngas impurities on acetogen viability and product distribution, and the process integration of gasification and fermentation are currently underdeveloped research topics, in which an investment is needed to achieve technological breakthroughs.

ABSTRACT: The Sustainable Value methodology was used to compare and rank eight combinations of waste biomass types and conversion technologies on a common assessment basis to produce energy, energy vectors and advanced biofuels. The studied combinations included agricultural and agro-industrial residues, slurries and effluents, pulp and paper mill sludge, piggery effluents and organic fractions of municipal solid waste, to produce biodiesel by (trans)esterification, biogas by anaerobic digestion, ethanol by fermentation, hydrogen by dark fermentation, electricity and heat by combustion, biogas and synthesis gas by gasification, and bio-oils by pyrolysis or hydrothermal liquefaction. The numerator “Functional Performance” of the Sustainable Value indicator was estimated according to 14 criteria of process technology, material and energy inputs and outputs, and acceptance by the stakeholders. The performance of the technologies was classified based on the values of relative importance (φ) and level of satisfaction (S) attributed to each criterion. The gasification of residues from the olive-oil industry reached the highest “Functional Performance”, followed by anaerobic digestion of chestnut processing residues and pig-rearing effluents. The Sustainable Value denominator “Costs” depended mainly on the degree of maturity of the technologies, which penalised pyrolysis, hydrothermal liquefaction and dark fermentation. The final ranking of the Sustainable Value indicator was gasification> combustion> anaerobic digestion> (trans)esterification> pyrolysis and fermentation to ethanol> hydrothermal liquefaction> dark fermentation, respectively for the most adequate waste biomass types under study. Thermochemical conversions were mainly impacted by process and input criteria, while output and social acceptance criteria were more decisive for the biochemical conversions. info:eu-repo/semantics/publishedVersion