• Energy Research

Biogas production occurs during methane fermentation from organic substrates and the mass remaining after fermentation, containing organic matter and valuable minerals having regard to plant nutrition, forms the digestate, which could be useful for fertilizing purposes and very beneficial in the case of the fertilization of rapeseeds. This paper focuses on the use of two forms of fertilization of rapeseeds—digestate and mineral fertilizers—in order to reduce the compressive strength of rapeseeds. The object presents results of compressive strength tests of three rape varieties (Bios, Feliks, Markus). The uniaxial compression tests between two parallel planes were made using a Zwick/Roell Z005 testing machine. Comparative analyses for the analyzed variables were carried out applying parametric and non-parametric statistical tests. On the basis of the conducted research, it was found that the distribution of the increase in the force crushing Bios and Feliks rapeseed varieties in both forms of cultivation was proportional to the increase in their mass. However, with a relatively comparable mass of Bios cv. seeds, in the case of the digestate use, a stronger correlation was found between the seed pressing force and its mass than for the multi-component fertilizer, understanding the need to apply more force to crush the seeds for this form of cultivation. In the conducted tests, the average size of rapeseed diameters of all varieties and forms of cultivation ranged from 1.81–1.95 mm, which indicates their good suitability for industrial purposes.

AbstractThe results from tests for the presence of cellulose in the agricultural biomass waste for selected quality traits of pellets produced were presented. Selected test raw materials revealed the average cellulose content determined by Kürschner-Hanak method in the range from less than 32% (buckwheat straw) to less than 43% (rye straw). There was negative linear relationship between the cellulose content in pellets from waste plant biomass and the bulk density and stability of pellets. It would be justified to carry out research on the content of lignin in plant biomass in the context of its impact on density, durability and the calorific value of the agglomerate.

This paper presents an analysis of selected qualitative characteristics of pellets produced from rape straw obtained from cultivations subjected to different fertilization treatments and from mixtures of straw selected for testing with crude glycerol obtained as a by-product from biodiesel production. The assessment focused on the following qualities of the obtained pellets: Moisture content, mechanical durability, heating value and main elements, that is, carbon, hydrogen, nitrogen, sulphur, chlorine and oxygen. The obtained results indicated that the different treatment regimens applied in spring rape cultivations had a significant impact on the physicochemical qualities of the straw. In terms of the heating value, traditional fertilization with multi-component fertilizer (NPK) yielded slightly lower chemical parameters (lower carbon content and heat of combustion) than in the case of straw obtained from the control sample and from the plot fertilized with digestate. Furthermore, in all of the analysed mixtures, the 10% addition of raw glycerol improved the mechanical characteristics of the produced straw pellets. After the 10% glycerol addition, in terms of the energetic use of these biofuels, the parameters of the fuel, such as heating value and net heating value, were slightly decreased.

During testing, the possibility of using hemp biomass for energy purposes was assessed. The criteria assessed were the physical and chemical properties of hemp biomass, as well as the combustion process of straw and briquettes made of it in a low-power boiler. The results were made and compared with currently applicable standards. Technical and chemical properties of hemp biomass are comparable with the best plants used for energy purposes. Studies have also shown the susceptibility of hemp biomass compaction. However, large emissions recorded during the combustion of the tested forms of biofuels from hemp straw in light of applicable standards disqualify this fuel for use in grate-type heating devices with air fed under the grate. It would be advisable to carry out research on the total costs of pellet production and their use in heating devices with a retort burner, while taking into account this biofuel’s ashes’ susceptibility of sintering.

Abstract This paper presents an assessment of the energetic and mechanical properties of pellets produced from agricultural biomass. For the production of pellets the following raw materials were used: wheat straw, rape straw, and maize straw. Additionally, the mixtures of wheat-rape straw, wheat-maize straw, and rape-maize straw (each accounting for 50% of the mass) were applied. The studied resources were ground with the use of a universal shredder driven by a 7.5 kW electric engine. A pelleting machine fitted with a fixed flat matrix with two driven thickening rolls was used to produce the pellets. Analyses of the moisture and calorific value of resources as well as the bulk density and mechanical strength of pellets were performed according to biding standards. The moisture of resources ranged from 16.5% to 18.5% for rape and maize straw, respectively. The average calorific value fluctuated between 15.3 MJ kg −1 for a mixture of wheat and rape straw to 16.2 MJ kg −1 for maize straw. The bulk density and mechanical strength of pellets depended on the type of resources used. The lowest bulk density was recorded for wheat straw pellets (386–420 kg m −3 ), and the highest (561–572 kg m −3 ) for maize straw pellets. The lowest mechanical strength of pellets was noted for rape (95.4–96.8%), whereas the highest was for pellets made from a wheat and maize straw mixture (96.8–98.9%).

The restrictions imposed by the European Green Deal on Europe are expected to make Europe climate-neutral by 2050. In this context, this article examines the current efforts to reduce emission levels, focusing on available international scientific papers concerning European territory, particularly Poland. The study paid special attention to the sector of agriculture, which is considered a key contributor to greenhouse gas generation. It also analysed the impact of various tillage techniques and the application of organic and inorganic fertilisers, e.g., nitrogen fertilisers, digestate, or compost, on the emissions of greenhouse gases and other environmentally harmful substances. Although there are few scientific articles available that comprehensively describe the problem of greenhouse gas emissions from agriculture, it is still possible to observe the growing awareness of farmers and their daily impact on the environment. The current study demonstrated that agricultural activities significantly contribute to the emissions of three main greenhouse gases: carbon dioxide, nitrous oxide, and methane. The tillage and soil fertilisation methods used play a crucial role in their emissions into the atmosphere. The use of no-tillage (or reduced-tillage) techniques contributes to the sustainable development of agriculture while reducing greenhouse gas emissions. The machinery and fuels used, along with innovative systems and sensors for precise fertilisation, play a significant role in lowering emission levels in agriculture. The authors intend to identify potential opportunities to improve crop productivity and contribute to sustainable reductions in gas emissions.