• Energy Research

Botryococcus braunii can produce both long-chain hydrocarbons as well as carbohydrates in large quantities, and is therefore a promising industrial organism for the production of biopolymer building blocks. Many studies describe the use of different strains of Botryococcus braunii but differences in handling and cultivation conditions make the comparison between strains difficult. In this study, 16 B. braunii strains obtained from six culture collections were compared for their biomass productivity and hydrocarbon and carbohydrate content. Biomass productivity was highest for AC768 strain with 1.8gL-1day-1, while hydrocarbon production ranged from none to up to 42% per gram biomass dry weight, with Showa showing the highest hydrocarbon content followed by AC761. The total carbohydrate content varied from 20% to 76% per gram of the biomass dry weight, with CCALA777 as the highest producer. Glucose and galactose are the main monosaccharides in most strains and fucose content reached 463mgL-1 in CCALA778.

Nitrogen and phosphorus concentration in the effluent of a wastewater treatment plant can vary significantly, which could affect the growth kinetic and chemical composition of microalgae when cultivated in this medium. The aim of this work was to study the rate of growth, nutrient removal and carbon dioxide biofixation as well as biomass composition of Scenedesmus obliquus (S. obliquus) when it is cultivated in wastewater at different nitrogen and phosphorus ratio, from 1:1 to 35:1. A more homogeneous method for calculating productivities in batch reactors was proposed. The proper N:P ratio for achieving optimum batch biomass productivity ranged between 9 and 13 (263 and 322 mg L(-1) d(-1) respectively). This was also the ratio range for achieving a total N and P removal. Above and below this range (9-13) the maximum biomass concentration changed, instead of the specific growth rate.The maximum carbon dioxide biofixation rate was achieved at N:P ratio between 13 and 22 (553 and 557 mg CO2 L(-1) d(-1) respectively). Lipid and crude protein content, both depend on the aging culture, reaching the maximum lipid content (34%) at the lowest N:P (1:1) and the maximum crude protein content (34.2%) at the highest N:P (35:1).

Model projections show that production of high-value products from microalgae could be profitable nowadays and commodities will become profitable within 10 years.

Batch experiments were performed to study biomass growth rate, nutrient removal and carbon dioxide bio-fixation of the marine microalgae Chlorella stigmatophora. Four different cultures at different salinities were tested: wastewater (WW), synthetic wastewater (SWW), seawater (SW) and diluted seawater (DSW). Experimental results showed that Chlorella stigmatophora grew satisfactorily in all culture media, except in SWW where inhibition occurred. In all cases, biomass experimental data were fitted to the Verlhust Logistic model (R2 > 0.982, p DSW>SW. In order to compare nitrogen and phosphorous removal kinetics, an estimation of the time required to reach the most restrictive concentration of total N and P in effluents as defined in the Directive 98/1565/CE (10 mg sigmaNL(-1) (T10(N)) and 1 mg sigmaPL(-1) (T1(p)) was performed. In the WW test T10(N) and T1(p) needed were of 45.15 and 32.27 hours respectively and at the end of the experimental the removal was in both 100%.

Scenedesmus obliquus, Chlorella vulgaris, Chlorella kessleri and a natural Bloom were cultivated in batch experiments, under controlled conditions, in urban wastewater (WW) and synthetic wastewater (SW) under 5% CO2 in air, with the object of estimating their capacity for nutrient removal, carbon dioxide biofixation, and generation of valuable biomass. In both culture media, the Bloom (Bl) and Scenedesmus (Sc) showed higher final biomass concentration (dried weight, dw) than the other species; the maximum yield obtained was 1950 ± 243 mg L(-1) for Bl and the minimum 821 ± 88 mg L(-1) for Cv, both in synthetic wastewater. Maximum specific growth rate values do not show significant differences between any of the 4 strains tested (p ≤ 0.05), nor between the 2 culture media. A new homogeneous method of calculating productivities has been proposed. Nitrogen removal in all the reactors was higher than 90%, except for BlSW (79%), and for phosphorus, the removal was higher than 98% in all trials. Maximum CO2 consumption rates reached were 424.4 and 436.7 mg L(-1) d(-1) for ScSW and ScWW respectively.

The microalga Scenedesmus obliquus was cultured in two cultivation stages: (1) in batch with real wastewater; (2) maintaining the stationary phase with different conditions of CO2, light and salinity according to a factorial design in order to improve the lipid content. The presence of the three factors increased lipid content from 35.8% to 49% at the end of the second stage; CO2 presence presented the highest direct effect increasing lipid content followed by light presence and salt presence. The ω-3 fatty acids content increased with CO2 and light presence acting in isolation, nevertheless, when both factors acted together the interaction effect was negative. The ω-3 eicosapentaenoic acid content of the oil from S. obliquus slightly exceeded the 1% maximum to be used as biodiesel source (EU normative). Therefore, it is suggested the blend with other oils or the selective extraction of the ω-3 fatty acids from S. obliquus oil.

The aim of this work was to study the stimulation of lipid production on the microalga Ankistrodesmus falcatus by varying cultivation conditions during the stationary phase. The effect of three factors (presence and absence of nitrogen, phosphorus, and light) has been tested once the cultures reached the stationary phase with the aim to increase the value of the biomass for further applications. Lipid content, elemental composition, Nile red fluorescence evolution, and calorific value of microalgal biomass were studied as well as biomass growth. Biomass presented a lipid content of 36.54 % at the end of the first stage, while at the end of the second stage, the experiments with the absence of phosphorus increased their lipid content until 45.94 and 44.55 %, the first with nitrogen and light presence and the second with absence of all factors. The combination of phosphorus absence and nitrogen and light presence achieved the highest lipid productivity (20.27 mg/L/day). The two-stage strategy to culture microalgae is a feasible option to increase the economic or energetic value of biomass.