• Energy Research

The renewable energy transition has introduced new electricity tariff structures. With the increased penetration of photovoltaic and wind power systems, users are being charged more for their peak demand. Consequently, peak shaving has gained attention in recent years. In this paper, we investigated the potential of peak shaving through battery storage. The analyzed system comprises a battery, a load and the grid but no renewable energy sources. The study is based on 40 load profiles of low-voltage users, located in Belgium, for the period 1 January 2014, 00:00–31 December 2016, 23:45, at 15 min resolution, with peak demand pricing. For each user, we studied the peak load reduction achievable by batteries of varying energy capacities (kWh), ranging from 0.1 to 10 times the mean power (kW). The results show that for 75% of the users, the peak reduction stays below 44% when the battery capacity is 10 times the mean power. Furthermore, for 75% of the users the battery remains idle for at least 80% of the time; consequently, the battery could possibly provide other services as well if the peak occurrence is sufficiently predictable. From an economic perspective, peak shaving looks interesting for capacity invoiced end users in Belgium, under the current battery capex and electricity prices (without Time-of-Use (ToU) dependency).

With the increasing shares of intermittent renewable sources in the grid, it becomes increasingly essential to quantify the requirements of the power systems flexibility. In this article, an adjusted weight flexibility metric (AWFM) is developed to quantify the available flexibility within individual generators as well as within the overall system. The developed metric is useful for power system operators who require a fast, simple, and offline metric. This provides a more realistic and accurate quantification of the available technical flexibility without performing time-consuming multi-temporal simulations. Another interesting feature is that it can be used to facilitate scenario comparisons. This is achieved by developing a new framework to assure the consistency of the metric and by proposing a new adjusted weighting mechanism based on correlation analysis and analytic hierarchy process (AHP). A new ranking approach based on flexibility was also proposed to increase the share of the renewable energy sources (RESs). The proposed framework was tested on the IEEE RTS-96 test-system. The results demonstrate the consistency of the AWFM. Moreover, the results show that the proposed metric is adaptive as it automatically adjusts the flexibility index with the addition or removal of generators. The new ranking approach proved its ability to increase the wind share from 28% to 37.2% within the test system. The AWFM can be a valuable contribution to the field of flexibility for its ability to provide systematic formulation for the precise analysis and accurate assessment of inherent technical flexibility for a low carbon power system.

In this paper, a mathematical analysis is presented to show the effect of grid-connected inverter (GCI) parameters on its emissions in the supraharmonic range. This analysis is extended to explain the effect of asymmetry on the emissions of parallel-connected GCIs on distributed power generation systems. The switching harmonics of a GCI appear as bands around the switching frequency and its multiples. A MATLAB/Simulink model is built to perform two studies. In the first study, we use one GCI to examine the effect of the parameters on the emissions, while in the second study, we examine the effect of the asymmetry of two parallel-connected GCIs on the total emission toward the grid. An actual setup is built to verify the results of the mathematical analysis and the simulation study. It is found that the SHs of single-phase GCI amplitude are strongly dependent on the DC-link voltage and the coupling inductor, while the phases of the sideband harmonics only change with changing the injected power. The variation of the injected power does not have any tangible effect on the carrier harmonics.

AC/DC converters, controlled by pulse width modulation (PWM) and used as power factor correction (PFC), is considered one of the main contributors to emissions in the range 2 kHz–150 kHz, recently known as the supraharmonic (SH) range. This study looks at the impact of SH grid distortion on the LF (<2 kHz) and HF (>2 kHz) emission of an AC/DC converter. The PFC boost converter is used as a particular case for validation of the results. It is observed that the AC/DC converters emit additional LF interharmonics and subharmonics when the grid voltage contains interharmonic components in the SH range. A mathematical analysis is provided to study and assess the interference between the SH in the background distortion and the AC/DC converters. Experimental studies are then performed for a PFC boost setup based on dSPACE MicroLabBox for the purposes of validating the mathematical analysis.

A low-voltage DC (LVDC) backbone with a battery energy storage system (BESS) and distributed photovoltaics (PV) is proven to be a more efficient alternative compared to the traditional AC architecture. However, previous research has also proven the fact that the benefit strongly depends on the operating voltage level. In this study, a dynamic backbone voltage on architectures with and without distributed maximum power point trackers (MPPT) is investigated. The dynamic voltage is driven by a multi-objective optimisation algorithm that will minimise the cable and converter loss. Applying the dynamic voltage with MPPT leads to a massive decrease of the loss compared to a static voltage with MPPT. Although, if the optimisation objective is extended with the minimisation of the PV curtailment loss, the MPPT can be eliminated without causing a considerable curtailment loss while maintaining a high efficiency. The sensitivity analysis showed that even when the cable is longer, the orientations of the PV distributed systems are different or the PV system is exposed to dynamic shading, dynamic voltage without maximum power point is still competitive compared to the alternatives. However, heavy static shading conditions could cause a notable shift of the MPP making it very hard to track this operating point by the algorithm. The elimination of the MPPT leads to a simpler design and installation, lower investment costs and a reduction of the raw material use. The proposed strategies and architectures are hence favourable to be applied in LVDC backbones massively fed by roof-mounted or building-integrated PV systems. This study provides the general approach which could be extended with distributed electric vehicle chargers.

This paper proposes a novel feature construction methodology aiming at both clustering yearly load profiles of low-voltage consumers, as well as investigating the stochastic nature of their peak demands. These load profiles describe the electricity consumption over a one-year period, allowing the study of seasonal dependence. The clustering of load curves has been extensively studied in literature, where clustering of daily or weekly load curves based on temporal features has received the most research attention. The proposed feature construction aims at generating a new set of variables that can be used in machine learning applications, stepping away from traditional, high dimensional, chronological feature sets. This paper presents a novel feature set based on two types of features: respectively the consumption time window on a daily and weekly basis, and the time of occurrence of peak demands. An analytic expression for the load duration curve is validated and leveraged in order to define the the region that has to be considered as peak demand region. The clustering results using the proposed set of features on a dataset of measured Flemish consumers at 15-min resolution are evaluated and interpreted, where special attention is given to the stochastic nature of the peak demands.

The increased utilisation of distributed renewable energy sources in low voltage grids leads to power quality problems such as overvoltages and voltage unbalance. This imposes challenges to the distribution system operators to maintain the power quality in their grids. To overcome these issues, energy storage systems could be integrated together with the distributed energy resources and the stored energy could be used when needed to better improve power quality and achieve better grid performance. However, integrating an energy storage system introduces additional cost, therefore, determining the right capacity is essential. In this article, an energy storage system is combined with the classical positive-sequence control strategy and the three-phase damping control strategy. The three-phase damping control strategy is able to mitigate the voltage unbalance by emulating a resistive behaviour towards the zero- and negative-sequence voltage components. This resistive behaviour can be set on different values such that the desired voltage unbalance mitigation is achieved. Hence, the three-phase damping control strategy, equipped with the energy storage system is investigated under different values of the resistive behaviour. Both control strategies are investigated under the same conditions and the impact of the different capacities of the energy storage systems is investigated.