• Energy Research

Underground Pumped Storage Hydropower (UPSH) is an alternative to manage the electricity production in flat regions. UPSH plants consist of two reservoirs of which at least one is underground. For this last reservoir, abandoned mines could be considered. UPSH related activities may induce hydrochemical variations, such as the increase of the oxygen (O2) partial pressure (pO2), which may entail negative consequences in terms of environment and efficiency, especially in coal mined areas where the presence of sulfide minerals is common. This work assesses the main expected environmental impacts that UPSH using abandoned coal mines may induce. © 2017 The Authors. Published by Elsevier Ltd. E. Pujades and A. Jurado gratefully acknowledge the financial support from the University of Liège and the EU through the Marie Curie BeIPD-COFUND postdoctoral fellowship programme (2014/16 and 2015/17 fellows from “FP7-MSCA-COFUND, 600405”). This research has been supported by the Public Service of Wallonia – Department of Energy and Sustainable Building. Peer reviewed

Pumped storage hydropower (PSH) enables the temporary storage of energy, including from intermittent renewable sources, and provides answers to the difficulties related to the mismatch between supply and demand of electrical energy over time. Implementing a PSH station requires two reservoirs at different elevations and with large volumes of water. The idea of using old, flooded open-pit quarries as a lower reservoir has recently emerged. However, quarries cannot be considered as impervious reservoirs, and they are connected to the surrounding aquifers. As a result, PSH activities may entail environmental impacts. The alternation of the pumping–discharge cycles generates rapid and periodic hydraulic head fluctuations in the quarry, which propagate into the surrounding rock media forcing the exchange of water and inducing the aeration of groundwater. This aeration can destabilize the chemical balances between groundwater and minerals in the underground rock media. In this study, two numerical groundwater models based on the chalk quarry of Obourg (Belgium) were developed considering realistic pumping–discharge scenarios. The aim of these models was to investigate the hydrodynamic and hydrochemical impact of PSH activities on water inside the quarry and in the surrounding rock media. Results showed that (1) water exchanges between the quarry and the adjacent rock media have a significant influence on the hydraulic head, (2) the frequency of the pump–discharge scenarios influence the potential environmental impacts, and (3), in the case of chalk formations, the expected impact of PSH on the water chemical composition is relatively limited around the quarry. Results highlight that those hydrogeological and hydrochemical concerns should be assessed when developing a project of a PSH installation using a quarry as a lower reservoir, considering all particularities of the proposed sites.

The intermittent nature of most renewable energy sources requires their coupling with an energy storage system, with pumped storage hydropower (PSH) being one popular option. However, PSH cannot always be constructed due to topographic, environmental, and societal constraints, among others. Underground pumped storage hydropower (UPSH) has recently gained popularity as a viable alternative and may utilize abandoned mines for the construction of the lower reservoir in the underground. Such underground mines may have complex geometries and the injection/pumping of large volumes of water with high discharge could lead to uneven water level distribution over the underground reservoir subparts. This can temporarily influence the head difference between the upper and lower reservoirs of the UPSH, thus affecting the efficiency of the plant or inducing structural stability problems. The present study considers an abandoned slate mine in Martelange in Southeast Belgium as the lower, underground, reservoir of an UPSH plant and analyzes its hydraulic behavior. The abandoned slate mine consists of nine large chambers with a total volume of about 550,000 m3, whereas the maximum pumping and turbining discharges are 22.2 m3/s. The chambers have different size and they are interconnected with small galleries with limited discharge capacity that may hinder the flow exchange between adjacent chambers. The objective of this study is to quantify the effect of the connecting galleries cross-section and the chambers adequate aeration on the water level variations in the underground reservoir, considering a possible operation scenario build upon current electricity prices and using an original hydraulic modelling approach. The results highlight the importance of adequate ventilation of the chambers in order to reach the same equilibrium water level across all communicating chambers. For fully aerated chambers, the connecting galleries should have a total cross-sectional area of at least 15 m2 to allow water flow through them without significant restrictions and maintain similar water level at all times. Partially aerated chambers do not attain the same water level because of the entrapped air; however, the maximum water level differences between adjacent chambers remain relatively invariant when the total cross-sectional area of the connecting galleries is greater than 8 m2. The variation of hydraulic roughness of the connecting galleries affects the water exchange through small connecting galleries but is not very influential on water moving through galleries with large cross-sections.

Underground pumped storage hydropower (UPSH) is an attractive opportunity to manage the production of electricity from renewable energy sources in flat regions, which will contribute to the expansion of their use and, thus, to mitigating the emissions of greenhouse gasses (GHGs) in the atmosphere. A logical option to construct future UPSH plants consists of taking advantage of existing underground cavities excavated with mining purposes. However, mines are not waterproofed, and there will be an underground water exchange between the surrounding geological medium and the UPSH plants, which can impact their efficiency and the quality of nearby water bodies. Underground water exchanges depend on hydrogeological features, such as the hydrogeological properties and the groundwater characteristics and behavior. In this paper, we numerically investigated how the hydraulic conductivity (K) of the surrounding underground medium and the elevation of the piezometric head determined the underground water exchanges and their associated consequences. The results indicated that the efficiency and environmental impacts on surface water bodies became worse in transmissive geological media with a high elevation of the piezometric head. However, the expected environmental impacts on the underground medium increased as the piezometric head became deeper. This assessment complements previous ones developed in the same field and contributes to the definition of (1) screening strategies for selecting the best places to construct future UPSH plants and (2) design criteria to improve their efficiency and minimize their impacts.

Abstract Underground Pumped Storage Hydropower (UPSH) is a potential alternative to manage electricity production in flat regions. UPSH plants will interact with the surrounding porous medium through exchanges of groundwater. These exchanges may impact the surrounding aquifers, but they may also influence the efficiency of the pumps and turbines because affecting the head difference between the reservoirs. Despite the relevance for an accurate efficiency assessment, the influence of the groundwater exchanges has not been previously addressed. A numerical study of a synthetic case is presented to highlight the importance of considering the groundwater exchanges with the surrounding porous medium. The general methodology is designed in order to be further applied in the decision making of future UPSH plants introducing each case specific complexity. The underground reservoir of a hypothetical UPSH plant, which consists in an open pit mine, is considered and modelled together with the surrounding porous medium. Several scenarios with different characteristics are simulated and their results are compared in terms of (1) head difference between the upper and lower reservoirs and (2) efficiency by considering the theoretical performance curves of a pump and a turbine. The results show that the efficiency is improved when the groundwater exchanges increase. Thus, the highest efficiencies will be reached when (1) the underground reservoir is located in a transmissive porous medium and (2) the walls of the open pit mine do not constrain the groundwater exchanges (they are not waterproofed). However, a compromise must be found because the characteristics that increase the efficiency also increase the environmental impacts. Meaningful and reliable results are computed in relation to the characteristics of the intermittent and expected stops of UPSH plants. The frequency of pumping and injection must be considered to properly configure the pumps and turbines of future UPSH plants. If not, pumps and turbines could operate far from their best efficiency conditions.

Underground pumped-storage hydropower (UPSH) is a promising technology to manage the electricity production in flat regions. UPSH plants consist of an underground and surface reservoirs. The energy is stored by pumping water from the underground to the surface reservoir and is produced by discharging water from the surface to the underground reservoir. The underground reservoir can be drilled, but a more efficient alternative, considered here, consists in using an abandoned mine. Given that mines are rarely waterproofed, there are concerns about the consequences (on the efficiency and the environment) of water exchanges between the underground reservoir and the surrounding medium. This work investigates numerically such water exchanges and their consequences. Numerical models are based on a real abandoned mine located in Belgium (Martelange slate mine) that is considered as a potential site to construct an UPSH plant. The model integrates the geometrical complexity of the mine, adopts an operation scenario based on actual electricity prices, simulates the behavior of the system during one year and considers two realistic scenarios of initial conditions with the underground reservoir being either completely full or totally drained. The results show that (1) water exchanges may have important consequences in terms of efficiency and environmental impacts, (2) the influence of the initial conditions is only relevant during early times, and (3), an important factor controlling the water exchanges and their consequences may be the relative location of the natural piezometric head with respect the underground reservoir.