• Energy Research
• 2021-2025close

Two activated carbons (AC) resulting from CO2 activation of Maize Cob Waste (MCW) were investigated as adsorbent materials for biogas upgrading to bio-methane applying a biorefinery concept. The porous carbons were originated from different times of activation and the one resulting from 3 h with CO2 (MCW(PA)3 h) showed better textural properties, higher working capacity, and selectivity towards CO2 than the carbon resulting from 2 h of activation (MCW(PA)2 h), making it the best candidate for biogas purification. The adsorption equilibrium measurements of CO2 and CH4 on MCW(PA)3 h carbon showed that the Sips isotherm model, as well as the Adsorption Potential Theory (APT), can be confidently employed to accurately correlate the adsorption equilibrium data of the adsorbates employed. In the range of the partial pressures typical for biogas upgrading units, MCW(PA)3 h showed higher CO2 uptakes than the ones reported for coal-based commercial ACs and similar uptakes to the ones reported for bio-based ACs. Moreover, the axial dispersed plug-flow and Linear Driving Force (LDF) approximation for lumped solid-diffusion mass transfer model used for the prediction of the dynamic behaviour of the adsorbate-adsorbent system, provided a good agreement with the experimental results, demonstrating its applicability to the studied system. This work represents the basis of future modelling works of a Pressure Swing Adsorption (PSA) cycle based on the use of MCW(PA)3 h as adsorbent material and demonstrates the high potential of this novel material to be applied in biogas upgrading processes

Porous carbon materials, derived from biomass wastes and/or as by-products, are considered versatile, economical and environmentally sustainable. Recently, their high adsorption capacity has led to an increased interest in several environmental applications related to separation/purification both in liquid- and gas-phases. Specifically, their use in carbon dioxide (CO2) capture/sequestration has been a hot topic in the framework of gas adsorption applications. Cost effective biomass porous carbons with enhanced textural properties and high CO2 uptakes present themselves as attractive alternative adsorbents with potential to be used in CO2 capture/separation, apart from zeolites, commercial activated carbons and metal-organic frameworks (MOFs). The renewable and sustainable character of the precursor of these bioadsorbents must be highlighted in the context of a circular-economy and emergent renewable energy market to reach the EU climate and energy goals. This mini-review summarizes the current understandings and discussions about the development of porous carbons derived from bio-wastes, focusing their application to capture CO2 and upgrade biogas to biomethane by adsorption-based processes. Biogas is composed by 55–65 v/v% of methane (CH4) mainly in 35–45 v/v% of CO2. The biogas upgraded to bio-CH4 (97%v/v) through an adsorption process yields after proper conditioning to high quality biomethane and replaces natural gas of fossil source. The circular-economy impact of bio-CH4 production is further enhanced by the use of biomass-derived porous carbons employed in the production process.

After undergoing biological treatment, wastewater still contains substances with endotoxic activity, such as lipopolysaccharide. However, due to the increasing practice of treating wastewater to make it suitable for drinking (potable reuse), the removal of these endotoxic active materials is crucial. These substances can be harmful to human health, leading to a condition called endotoxaemia. Furthermore, environmental endotoxins pose risks to pharmaceutical manufacturing processes and the quality of the final pharmaceutical products. Ultimately, the most significant concern lies with the patient, as exposure to such substances can have adverse effects on their health and well-being. Activated carbon has a proven efficiency for endotoxin removal; rice husk (RH), as a type of natural lignocellulosic agricultural waste, is a unique carbon precursor material in terms of its availability, large-scale world production (over 140 million tons annually), and is characterized by the presence of nanoscale silica phytoliths, which serve as a template to create additional meso/macropore space within the nanoscale range. High surface area RH/lignin-derived honeycomb monoliths were prepared in this study via extrusion, followed by carbonization and physical and chemical activation to develop additional pore space. The nanoporosity of the carbon honeycomb monoliths was established by means of low-temperature nitrogen adsorption studies, using calculations based on QSDFT equilibrium and BJH models, as well as mercury intrusion porosimetry (MIP) and SEM investigations. An alternative method for the elimination of the bacterial lipopolysaccharide (LPS)—a conventional marker—using filtration in flowing recirculation systems and the adsorbent activity of the monoliths towards LPS was investigated. Since LPS expresses strong toxic effects even at very low concentrations, e.g., below 10 EU/mL, its removal even in minute amounts is essential. It was found that monoliths are able to eliminate biologically relevant LPS levels, e.g., adsorption removal within 5, 30, 60, 90, and 120 min of circulation reached the values of 49.8, 74.1, 85.4, 91.3%, and 91.6%, respectively.

Rare earth elements (REEs), comprising seventeen metallic elements, including lanthanides, scandium, and yttrium, are indispensable for modern technological industries due to their unique properties. However, their supply is critically risky for the European Union, with 95% of global production concentrated in China, Brazil, Vietnam, Russia, India, and Australia. This mini-review examines the adsorption of REEs onto pyrolytic carbon-based materials as a sustainable recovery method from secondary raw materials. The review covers different types of carbon-based adsorbents used in several research works, such as activated carbon, chars, and biochar, and discusses their adsorption mechanisms and influencing factors. Comparative analyses of adsorption capacities highlight the significance of surface area and functionalization in enhancing adsorption efficiency. Despite promising results, the variability in adsorption performance due to experimental conditions and the scarcity of real-world application studies are noticed. This review underscores the need for further research using real e-waste leachates to validate the practical applicability of pyrolytic carbon-based adsorbents for REEs’ recovery, aiming for an economically and environmentally sustainable solution.