• Energy Research

Abstract This study assessed the effects of stand structure and fertilisation with wood ash and/or sludge on wood fuel quality of Salix viminalis. The relative proportions of bark and wood in 1-, 2- and 3-year-old shoot populations were determined. The concentrations of essential elements (N, P, K) and heavy metals (Cu, Zn, Cd, Ni) in bark and wood were used to assess the wood fuel quality in harvestable shoot biomass. Controlled field experiments were conducted on two newly harvested commercial short-rotation willow coppice fields. Five treatments were applied: sewage sludge at the maximum legally permitted amount; ash; two sludge–ash mixtures supplying the maximum and twice the maximum permitted sludge–ash amount; and a control receiving mineral nutrients only. The proportion of bark in the willow stands was decreasing with the age of the shoot population. The shoot population with few large stems, compared to that with many small stems, had a lower proportion of element-rich bark in the harvestable shoot biomass, meaning better quality of the wood fuel. Overall, wood fuel quality in terms of mineral concentrations was influenced by the age of the shoot population at harvest, stand structure, management practices (e.g. planting density, fertilisation) and site conditions (soil type, element availability). Our results imply that harvestable shoot biomass of willows grown as few large stems have better wood fuel quality, compared to harvestable shoot biomass of many small stems. Increased length of cutting cycle improves the wood fuel quality.

Short-rotation coppice (SRC) is an important source of woody biomass for bioenergy. Despite the research carried out on several aspects of SRC production, many uncertainties create barriers to farmers establishing SRC plantations. One of the key economic sources of uncertainty is harvesting methods and costs; more specifically, the performance of contemporary machine methods is reviewed. We collected data from 25 literature references, describing 166 field trials. Three harvesting systems predominate: 127 used single pass cut-and-chip harvesters, 16 used double pass cut-and-store harvesters, 22 used the cut-and-bale harvester, and one study used a cut-and-billet harvester. Mean effective material capacity (EMC) was 30 Mg fresh weight h-1 (cut-and-chip technique), 19 Mg fresh weight h-1 (cut-and-store technique) and 14 Mg fresh weight h-1 (cut-and-bale technique). However, this comparison does not consider engine power, which varies with harvesting technique; cut-and-chip harvesters are by far the most powerful (>200 kW). When limiting harvesters to a maximum engine power of 200 kW, cut-and-chip harvesters achieved the lowest EMC (5 Mg fresh weight h-1), but they also perform a higher degree of material processing (cutting and chipping) than cut-and-store harvesters (only cutting) or than the cut-and-bale harvester (cutting and baling). The trend in commercial machinery is towards increased engine power for cut-and-chip and cut-and-store harvesters. No trends in EMC were documented for the recently developed cut-and-bale harvesting technique, which is presently produced in one version only. Field stocking (5-157 Mg fresh weight ha-1 in the reviewed studies) has a significant effect on harvester EMC. Lower field stocking can constrain the maximum EMC achieved by the machine given that harvesting speed can only be increased to a point. While the reviewed studies did not contain sufficient harvesting cost data for a thorough analysis, harvesting costs ranged between 6 and 99 EUR Mg-1 fresh weight.

Adding nutrient-rich residues such as municipal wastewater and sludge to willow and poplar short-rotation coppice gives more cost-effective and sustainable cultivation, but leaching to groundwater and disturbance to plant growth must be avoided. The effects of adding municipal wastewater irrigation to willows and poplars and sewage sludge to willows were compared in a two-year experiment. Wastewater irrigation enhanced plant growth. Near-zero nitrate-N concentrations occurred in drainage water when the root system of both species was well-established. The ability to retain N and P was satisfactory when poplars and willows were irrigated with wastewater. Thus relatively high additions of N and P with wastewater will probably not contaminate groundwater, but potential P leaching should not be underestimated. The same applies for sewage sludge applications to willow.

Abstract Short-rotation willow coppice is being used in several locations in Sweden as vegetation filters for wastewater treatment. An experiment was conducted in order to quantify the leaching of nitrogen and the toxic effects on the plants after application of wastewater under “worst case” conditions. Eight 1200-1 lysimeters (4 with clay and 4 with sand) were irrigated-fertilised with wastewater from dewatering of sewage sludge or with liquid fertiliser during 8 days, resulting in doses corresponding to 320 kg N ha −1 . Thereafter, plants were daily irrigated with tapwater at a rate of 10 mm d −1 for 123 days. Nitrate-N leaching loads from May until October were approximately 70 kg N ha −1 for clay and 90 kg N ha −1 for sand lysimeters (not significantly different). Leaching loads of ammonium-N and organic N were low (approximately 10 kg N ha −1 for all treatments). The high nitrate-N leaching loads were mainly attributed to the high nitrogen application rate and not to the chemical composition of the fertilisers. No short-term damages to the plants caused by the application of wastewater were observed.

This research investigates how biomass supply chains (BSChs) for bioenergy within the broader bioeconomy could contribute to the post-COVID-19 recovery in three dimensions: boosting economic growth, creating jobs, and building more resilient and cleaner energy systems in four future scenarios, in the short term (by 2023) and long term (by 2030). A SWOT analysis on BSChs was used for generating a questionnaire for foresight by a two-round Delphi study. To interpret the results properly, a short survey and literature review is executed to record BSChs behavior during the pandemic. In total, 23 (55% response rate) and 28 (46% response rate) biomass experts from three continents participated in the Delphi and the short survey, respectively. The strongest impact from investment in BSChs would be on economic growth, followed by a contribution to the resilient and cleaner energy systems and job creation. The effects would be more visible in the long- than in the short-term period. Investments with the most impact on recovery are those that improve biomass material efficiency and circularity. Refurbishment of current policies to enhance the supply of biomass as a renewable resource to the future economy is a must.

Short-rotation willow coppice (SRWC), grown on farmland in Sweden for energy-biomass production, was fertilised with sewage sludge and wood-ash mixtures on the basis of the permitted annual phosphorus supply. Two identical experiments were conducted in central Sweden, on two newly harvested commercial SRWC fields. The maximum legally permitted amount of the sludge-ash mixture, sludge only, ash only, and twice the maximum permitted sludge-ash amount, were applied. The aim was to assess the effect of pH changes following treatment, on the ability of SRWC to take up large amounts of Cd and other metals. The remediation effect of SRWC was also studied. Under the experimental conditions applied, uptake by SRWC was unaffected by pH changes. The differences between the amounts of metals experimentally applied, less the uptake by SRWC after a potential harvest, were broadly within the permitted limits. For Cd, a reduction of total amounts in soil was observed.

Gentle remediation options (GRO) are based on the combined use of plants, associated microorganisms and soil amendments, which can potentially restore soil functions and quality. We studied the effects of three GRO (aided-phytostabilisation, in situ stabilisation and phytoexclusion, and aided-phytoextraction) on the soil microbial biomass and respiration, the activities of hydrolase enzymes involved in the biogeochemical cycles of C, N, P, and S, and bacterial community structure of trace element contaminated soils (TECS) from six field trials across Europe. Community structure was studied using denaturing gradient gel electrophoresis (DGGE) fingerprinting of Bacteria, α- and β-Proteobacteria, Actinobacteria and Streptomycetaceae, and sequencing of DGGE bands characteristic of specific treatments. The number of copies of genes involved in ammonia oxidation and denitrification were determined by qPCR. Phytomanagement increased soil microbial biomass at three sites and respiration at the Biogeco site (France). Enzyme activities were consistently higher in treated soils compared to untreated soils at the Biogeco site. At this site, microbial biomass increased from 696 to 2352 mg ATP kg-1 soil, respiration increased from 7.4 to 40.1 mg C-CO2 kg-1 soil d-1, and enzyme activities were 2-11-fold higher in treated soils compared to untreated soil. Phytomanagement induced shifts in the bacterial community structure at both, the total community and functional group levels, and generally increased the number of copies of genes involved in the N cycle (nirK, nirS, nosZ, and amoA). The influence of the main soil physico-chemical properties and trace element availability were assessed and eventual site-specific effects elucidated. Overall, our results demonstrate that phytomanagement of TECS influences soil biological activity in the long term.