• Energy Research

Chlorella protothecoides, a lipid-producing microalga, was grown heterotrophically and autotrophically in separate reactors, the off-gases exiting the former being used to aerate the latter. Autotrophic biomass productivity with the two-reactor association, 0.0249gL(-1)h(-1), was 2.2-fold the value obtained in a control autotrophic culture, aerated with ambient air. Fatty acid productivity was 1.7-fold the control value. C. protothecoides heterotrophic biomass productivity was 0.229gL(-1)h(-1). This biomass' fatty acid content was 34.5% (w/w) with a profile suitable for biodiesel production, according to European Standards. The carbon dioxide fixed by the autotrophic biomass was 45mgCO2L(-1)h(-1) in the symbiotic arrangement, 2.1 times the control reactor value. The avoided CO2 atmospheric emission represented 30% of the CO2 produced in the heterotrophic stage, while the released O2 represented 49% of the oxygen demand in that stage. Thus, an increased efficiency in the glucose carbon source use and a higher environmental sustainability were achieved in microalgal biodiesel production using the proposed assembly.

Abstract This paper discusses the overall energy consumption and greenhouse gas emissions when extracting pigments and producing hydrogen from Spirogyra sp. microalga biomass. The energy evaluation from the biomass leftovers was also included in this work. The influence of the functional unit and different allocation criteria on the biorefinery assessments is also shown. The study consists of laboratory tests showing Spirogyra sp. growth, harvesting, drying, pigment extraction and fermentation by Clostridium butyricum. Electrocoagulation and solar drying were tested and compared to conventional centrifugation and electrical dewatering in terms of their energy consumption for harvesting and dewatering, respectively. To discuss the biorefinery viability, the pigments and biohydrogen (bioH2) retail costs are considered against operational costs according to electricity needs. The low yield of biochemical hydrogen and the high energy requirements for the pigment extraction were identified as main topics for further research. This research hopefully contributes to highlight the importance of energy and emission balances in order to decide on feasibility of the biorefinery.

The microalga Nannochloropsis sp. was used in this study, in a biorefinery context, as biomass feedstock for the production of fatty acids for biodiesel, biohydrogen and high added-value compounds. The microalgal biomass, which has a high lipid and pigment content (mainly carotenoids), was submitted to supercritical CO2 extraction. The temperature, pressure and solvent flow-rate were evaluated to check their effect on the extraction yield. The best operational conditions to extract 33 g lipids/100 g dry biomass were found to be at 40 °C, 300 bar and a CO2 flow-rate of 0.62 g/min. The effect of adding a co-solvent (ethanol) was also studied. When supercritical CO2 doped with 20% (w/w) ethanol was used, it was possible to extract 45 g lipids/100 g dry biomass of lipids and recover 70% of the pigments. Furthermore, the remaining biomass after extraction was effectively used as feedstock to produce biohydrogen through dark fermentation by Enterobacter aerogenes resulting in a hydrogen production yield of 60.6 mL/g dry biomass.

Abstract Flow cytometry was used to assess β-carotene content, cell membrane permeability, cell size and granularity in Rhodotorula glutinis mutant 400A15 grown under different oxygen transfer coefficients (k L a) and carbon to nitrogen ratios (C/N). A Doehlert distribution was used in order to select the best conditions that induced the highest carotenoids production. The highest β-carotene content (0.79 mg g−1 DCW) at the lowest k L a and C/N (5 × 10−3 s−1 and 11.3 respectively). Under these conditions, the biomass concentration attained 18.60 g L−1. The highest ratio of cells with permeabilised membranes (2.6 %), and the highest cell size and granularity were also obtained under these conditions. It was observed that C/N showed a stronger influence than the k L a on the measured cell parameters.

The potential of the supercritical antisolvent micronization (SAS) technique was evaluated for the production of CaO-based particles with a size and a physical structure that could enable high performance for CO2 capture through the calcium looping process. Two sources of calcium derivative compounds were tested, waste marble powder (WMP) and dolomite. The SAS micronization of the derivate calcium acetate was carried out at 60 °C, 200 bar, a 0.5 mL min−1 flow rate of liquid solution, and 20 mg mL−1 concentration of solute, producing, with a yield of more than 70%, needle-like particles. Moreover, since dolomite presents with a mixture of calcium and magnesium carbonates, the influence of the magnesium fraction in the SAS micronization was also assessed. The micronized mixtures with lower magnesium content (higher calcium fraction) presented needle-like particles similar to WMP. On the other hand, for the higher magnesium fractions, the micronized material was similar to magnesium acetate micronization, presenting sphere-like particles. The use of the micronized material in the Ca-looping processes, considering 10 carbonation-calcination cycles under mild and realistic conditions, showed that under mild conditions, the micronized WMP improved CaO conversion. After 10 cycles the micronization, WMP presented a conversion 1.8 times greater than the unprocessed material. The micronized dolomite, under both mild and real conditions, maintained more stable conversion after 10 cycles.

This study demonstrates the simultaneous production of bioelectricity and added-value pigments in a Photosynthetic Alga Microbial Fuel Cell (PAMFC). A PAMFC was operated using Chlorella vulgaris in the cathode compartment and a bacterial consortium in the anode. The system was studied at two different light intensities and the maximum power produced was 62.7 mW/m(2) with a light intensity of 96 μE/(m(2)s). The results showed that increasing light intensity from 26 to 96 μE/(m(2)s) leads to an increase of about 6-folds in the power produced. Additionally, the pigments produced by the microalga were analysed and the results showed that the light intensity and PAMFC operation potentiated the carotenogenesis in the cathode compartment. The demonstrated possibility of producing added-value microalgae biomass in microbial fuel cell cathodes will increase the economic feasibility of these bioelectrochemical systems, allowing the development of energy efficient systems for wastewater treatment and carbon fixation.

Today microalgae represent a viable alternative source for high-value products. The specie Chlorella protothecoides (Cp), heterotrophically grown, has been widely studied and provides a high amount of lutein and fatty acids (FA) and has a good profile for biodiesel production. This work studies carotenoid and FA production by autotrophic grown Cp. Cp was grown until the medium's nitrogen was depleted, then diluted in NaCl solution, resulting in nutritional, luminosity, and salinity stresses. Different NaCl concentrations were tested (10, 20, 30 g/L) at two different dilutions. After dilution, a color shifting from green to orange-red was noticed, showing carotenoid production. The best production of both carotenoids and FA was attained with a 20 g/L NaCl solution. The total carotenoid content was 0.8 % w/w (canthaxanthin (23.3 %), echinenone (14.7 %), free astaxanthin (7.1 %), and lutein/zeaxanthin (4.1 %)). Furthermore, the total lipid content reached 43.4 % w/w, with a FA composition of C18:1 (33.64 %), C16:0 (23.30 %), C18:2 (11.53 %), and less than 12 % of C18:3, which is needed to fulfill the biodiesel quality specifications (EN 14214).

Biofuel production from microalgal biomass could be an alternative solution to conventional biofuels typically dependent on food and high land/water demanding crops. However, the economic and energetic viability of microalgal biofuels is limited by their harvesting processes. The finding of innovative, low cost and efficient harvesting method(s) is imperative. In this study, the Electro-Coagulation (EC) was studied as a process to harvest the marine Nannochloropsis sp. microalga. Several EC operational conditions were studied and the best EC recovery efficiency (>97%) was achieved using a current density of 8.3 mA cm(-2) for 10 min. The quality of the recovered microalgal biomass was evaluated in terms of total lipids, fatty acid and pigment profile where no significant differences were observed after EC treatment. The energy requirements of the harvesting process were estimated and the combination of EC and centrifugation processes proved to decrease significantly the energy demand when compared with the individual process.