• Energy Research

An aerobic granular bioreactor was operated for over 4months, treating a synthetic wastewater with a high ammonium content (100mgNL-1). The inoculum was collected from a bioreactor performing simultaneous partial nitrification and aromatic compounds biodegradation. From day-56 onwards, 2-fluorophenol (2-FP) (12.4mgL-1) was added to the feeding wastewater and the system was bioaugmented with a 2-FP degrading bacteria (Rhodococcus sp. FP1). By the end of operation, complete 2-FP biodegradation and partial nitrification were simultaneously achieved. Aerobic granules remained stable over time. During the 2-FP loading, a shift in the community structure occurred, coinciding with the improvement of 2-FP degradation. DGGE analysis did not allow to infer on the bioaugmented strain presence but pyrosequencing analysis detected Rhodococcus genus by the end of operation. Together with other potential phenolic-degraders within granules, these microorganisms were probably responsible for 2-FP degradation.

AbstractTomato residues are a form of solid waste that can be converted into methane through anaerobic digestion (AD). However, methane production is often limited due to incomplete hydrolysis caused by the high lignocellulosic content of tomato waste. Enzymatic pretreatments represent a promising approach to enhance methane yields by facilitating substrate hydrolysis. This study evaluated four commercial enzymatic blends – Celluclast 1.5 L, Maxoliva HC L, Viscozyme, and Novozym 435 – using biomethane potential (BMP) tests with two operational strategies: (i) preincubation of enzymes with tomato waste prior to AD, and (ii) direct addition of enzymes to the anaerobic digester. Maxoliva achieved the highest methane yield (348 ± 20 mL CH4 g−1 volatile solids (VS)) under preincubation, representing 99.5% of the theoretical BMP and a 90% increase in comparison with the control. Kinetic analysis using the modified Gompertz equation revealed that Maxoliva also exhibited the highest maximum methane production rate (RMAX = 5.5 ± 0.2 mL CH4 g−1 VS day−1) with direct addition. Conversely, Viscozyme showed limited effectiveness, reaching only 47% of the theoretical BMP value. The enhanced methane production observed with certain enzymatic blends is likely attributable to cellulase activity, which facilitates the breakdown of complex carbohydrates into easily biodegradable polysaccharides.

The influence of the substrate concentration, the micro and macro nutrients and buffer requirements, the sludge origin (biomass that is acclimatized or not acclimatized to waste) and the inoculum/substrate ratio (ISR) were studied to determine their effects in the methanogenic potential of turkey manure, which is a solid waste. According to the results obtained, the methane production determination does not require the addition of nutrients (additional to the contents in the waste) and a buffer for this type of assay. The methane yield (γ(CH) ₄) performance is given by the substrate concentration and the sludge origin, therefore it is better to carry out the assay with biomass that is already adapted to the waste. The methanogenic potential of this type of waste is not determined by the amount of sludge and it does not need an external inoculum (external to the waste contents).

Continuous feeding operation of an airlift reactor and its inoculation with mature aerobic granules allowed the successful treatment of a mixture of aromatic compounds (p-nitrophenol, o-cresol and phenol). Complete biodegradation of p-nitrophenol, o-cresol, phenol and their metabolic intermediates was achieved at an organic loading rate of 0.61 g COD L(-1)d(-1). Stable granulation was obtained throughout the long-term operation (400 days) achieving an average granule size of 2.0 ± 1 mm and a sludge volumetric index of 26 ± 1 mL g(-1) TSS. The identified genera in the aerobic granular biomass were heterotrophic bacteria able to consume aromatic compounds. Therefore, the continuous feeding regimen and the exposure of aerobic granules to a mixture of aromatic compounds make possible to obtain good granulation and high removal efficiency.