• Energy Research

Agri-food residues or by-products have increased their contribution to the global tally of unsustainably generated waste. These residues, characterized by their inherent physicochemical properties and rich in lignocellulosic composition, are progressively being recognized as valuable products that align with the principles of zero waste and circular economy advocated for by different government entities. Consequently, they are utilized as raw materials in other industrial sectors, such as the notable case of environmental remediation. This review highlights the substantial potential of thermochemical valorized agri-food residues, transformed into biochar and hydrochar, as versatile adsorbents in wastewater treatment and as promising alternatives in various environmental and energy-related applications. These materials, with their enhanced properties achieved through tailored engineering techniques, offer competent solutions with cost-effective and satisfactory results in applications in various environmental contexts such as removing pollutants from wastewater or green energy generation. This sustainable approach not only addresses environmental concerns but also paves the way for a more eco-friendly and resource-efficient future, making it an exciting prospect for diverse applications.

An expanding number of human activities are contributing to the rising levels of aromatic compounds, which pose a major threat to the ecosystem. However, readily available microbial enzymes might be used to remediate contaminated wastewater in an economical and environmentally benign manner. In this study, an efficient method of laccase-oriented immobilization on modified Immobead 150P was proposed. The oriented immobilization technique using aminated laccase exceeds in both protein loading onto the carrier (4.26 mg/g) and immobilization yield (93.57%) due to the availability of more active sites. The oriented aminated laccase preserves 100% and 95% of its original activity after six and ten cycles of operation, respectively. The thermal stability performance of the oriented enzyme was the best among both free and random immobilized forms, since it was able to conserve 79% and 44% of its initial activity after 6 h at 50 °C and 60 °C, respectively. The ideal pH of oriented immobilized laccase was altered from 3.0 to 4.0, and it was more stable than both free and random immobilized laccases at pH 7.0. Finally, the integration of the adsorption capacity of Immobead 150P and the biodegradation ability of laccase promises the efficient removal of aqueous phenolics. Oriented immobilized laccase may provide a significant new approach for wastewater treatment, according to these findings.

Hydrothermal carbonization (HTC) is a facile, low-cost and eco-friendly thermal conversion process that has recently gained attention with a growing number of publications (lower 50 in 2000 to over 1500 in 2020). Despite being a promising technology, problems such as operational barriers, complex reaction mechanisms and scaling have to be solved to make it a commercial technology. To bridge this current gap, this review elaborates on the chemistry of the conversion of lignocellulosic biomass. Besides, a comprehensive overview of the influence of the HTC operational conditions (pH, temperature, water:biomass ratio, residence time and water recirculation) are discussed to better understand how hydrochar with desired properties can be efficiently produced. Large-scale examples of the application of HTC are also presented. Current applications of hydrochar in the fields of energy, biocatalysis and environment are reviewed. Finally, economic cost and future prospects are analyzed.

The applicability of electro-Fenton technology to remediation of wastewater contaminated by several organic pollutants such as dyes and polycyclic aromatic hydrocarbons has been evaluated using iron-enriched zeolite as heterogeneous catalyst. The electro-Fenton technology is an advanced oxidation process that is efficient for the degradation of organic pollutants, but it suffers from the high operating costs due to the need for power investment. For this reason, in this study microbial fuel cells (MFCs) were designed in order to supply electricity to electro-Fenton processes and to achieve high treatment efficiency at low cost. Initially, the effect of key parameters on the MFC power generation was evaluated. Afterwards, the degradation of Reactive Black 5 dye and phenanthrene was evaluated in an electro-Fenton reactor, containing iron-enriched zeolite as catalyst, using the electricity supplied by the MFC. Near complete dye decolourization and 78% of phenanthrene degradation were reached after 90 min and 30 h, respectively. Furthermore, preliminary reusability tests of the developed catalyst showed high degradation levels for successive cycles. The results permit concluding that the integrated system is adequate to achieve high treatment efficiency with low electrical consumption.

Several studies in laboratory-scale bioreactors are undertaken in order to verify the beneficial effect of thermal spring water in the culture medium of Thermus thermophilus HB27. Two bioreactor configurations, stirred tank and airlift, are investigated to determine the most suitable one to develop a continuous process. Water mineral composition affects the lipolytic enzyme secretion and growth of T. thermophilus HB27 in both bioreactor configurations. Furthermore, the lipolytic activity is strongly enhanced when stirred tank bioreactor is used. Moreover, operation in a stirred tank at an agitation rate of 650 rpm leads to the highest total lipolytic activity (intra- and extracellular enzyme) around 280 U/L after 32 h. Continuous cultures operating in the optimised conditions determined in batch cultures are carried out. It is noticeable that the stirred tank bioreactor was able to operate in a continuous flow mode without operational problems. In addition, the lipolytic activity obtained is about 2-fold higher than that attained in batch cultures.

In this work, a novel remediation strategy consisting of a sequential biological and physical process is proposed to remove dyes from a textile polluted effluent. The decolorization ability of Anoxybacillus flavithermus in an aqueous effluent containing two representative textile finishing dyes (Reactive Black 5 and Acid Black 48, as di-azo and antraquinone class, respectively) was proved. The decolorization efficiency for a mixture of both dyes reached almost 60% in less than 12h, which points out the suitability of the selected microorganism. In a sequential stage, an aqueous biphasic system consisting of non-ionic surfactants and a potassium-based organic salt, acting as the salting out agent, was investigated. The phase segregation potential of the selected salts was evaluated in the light of different thermodynamic models, and remediation levels higher than 99% were reached.

In this work, the potential for sustainable energy production from wastes has been exploited using a combination fungus-bacterium in microbial fuel cell (MFC) and electro-Fenton technology. The fungus Trametes versicolor was grown with Shewanella oneidensis so that the bacterium would use the networks of the fungus to transport the electrons to the anode. This system generated stable electricity that was enhanced when the electro-Fenton reactions occurred in the cathode chamber. This configuration reached a stable voltage of approximately 1000 mV. Thus, the dual benefits of the in situ-designed MFC electro-Fenton, the simultaneous dye decolourisation and the electricity generation, were demonstrated. Moreover, the generated power was effectively used to drive an ex situ electro-Fenton process in batch and continuous mode. This newly developed MFC fungus-bacterium with an in situ electro-Fenton system can ensure a high power output and a continuous degradation of organic pollutants.

Chlorpyrifos (CP) is one of the most commonly applied insecticides for control of pests and insects. The inappropriate use of this kind of chemicals has caused heavy contamination of many terrestrial and aquatic ecosystems thus representing a great environmental and health risk. The main purpose of this work is to investigate novel microbial agents (Pseudomonas stutzeri and the previously obtained consortium LB2) with the ability to degrade CP from polluted effluents. This goal was achieved by operating at different lab scales (flask and bioreactor) and operation modes (batch and fed-batch). Very low degradation and biomass levels were detected in cultures performed with the consortium LB2. In contrast, near complete CP degradation was reached by P. stutzeri at the optimal conditions in less than 1 month, showing a depletion rate of 0.054 h(-1). The scale-up at bench scale stirred tank bioreactor allowed improving the specific degradation rate in ten folds and total CP degradation was obtained after 2 days. Moreover, biomass and biodegradation profiles were modelled to reach a better characterization of the bioremediation process.