• Energy Research

In the present work the characterisation by image analysis of anaerobic biomass under organic and hydraulic shocks was performed. The digester was fed with a synthetic substrate, containing 50% oleic acid (as COD). Organic and hydraulic shocks were performed by stepwise increasing the substrate concentration or by reducing the hydraulic retention time. In both cases the organic loading rate changed from 6 to 30 kg COD/m3.d. Hydraulic shock induced a fast decrease in the number of free filaments and in total filament length, which attained a minimum value 51 hours after beginning the shock. The initial filament values were not recovered 340 hours after the hydraulic shock. In the organic shock, the minimum values of these parameters were detected 200 hours after beginning the shock and initial values were recovered 840 hours after. During the hydraulic shock the methanogenic acetoclastic activity was directly correlated to the number and length of free filaments. This result suggests that filaments are predominantly acetoclastic bacteria, probably Methanosaeta.

Magnetic effects induced in ethanolic fermentation by Saccharomyces cerevisiae strain DAUFPE-1012 were studied during a 24 h exposure to 220 mT steady magnetic fields (SMF) at 23 +/- 1 degrees C, produced by NdFeB rod magnets. The magnets were attached diametrically opposed (N to S) to a cylindrical tube reactor. The biomass growth in the reactor culture media (yeast extract + glucose 2%) during 24 h was monitored by measurements of optical density, which was correlated to cell dry weight. Ethanol concentration and glucose level were measured every 2 h. The pH of the culture media was maintained between 4 and 5. As a result, biomass (g/L) increased 2.5-fold and ethanol concentration 3.4-fold in magnetized cultures (n = 8) as compared with SMF nonexposed cultures (n = 8). Glucose consumption was higher in magnetized cultures, which correlated to the ethanol yield.

An automated procedure for the characterisation by image analysis of the morphology of activated sludge has been used to monitor the biomass in a pilot wastewater treatment plant during two runs inoculated with a different sludge and operated at two different temperatures. The bulking events were easily detected by image analysis. Correlations were found between settleability properties (Sludge Volume Index and settling velocity) and the morphological parameters (filament total length, filament number and floc size).

The reuse of biomass waste has been gaining attention in adsorption processes to remove pollutants of emerging concern from water and wastewater. In this work, the potential of alginate-extracted macro-algae waste to uptake synthetic dyes and metal cations was evaluated in comparison with raw algae. In affinity assays, both materials were able to remove metal cations and cationic dyes up to maximum rates, and no significant removal was observed for an anionic dye in an acidic medium. Competition was observed in multi-component systems of metal cations and dyes. For binary samples containing organic and inorganic contaminants, kinetic modeling evidenced the distinct nature of both types of adsorbates. Pb(II) biosorption was best described as a first-order process, while second-order and Elovich models better fitted methyl blue (MB) uptake data. For equimolar binary samples, the Sips isothermal model fitted the experimental data more satisfactorily at room temperature. Isotherms for 20, 30, 40, and 60 °C exhibited favorable adsorption profiles with spontaneous ΔG values for both raw macro-algae and waste from alginate extraction. Maximum adsorption capacities were competitive with previous reports in the literature for a wide range of biomaterials, pointing to the slightly higher efficiency with algae waste in batch experiments. In elution tests, HNO3 (0.5 M) showed the best recovery rates of metal cations. Continuous biosorption operation revealed the performance of the brown algae waste was considerably more efficient than raw algae with breakthrough biosorption capacities up to 3.96 and 0.97 mmol.g-1 for the removal of Pb(II) and MB, respectively. A total of 3.0 g of algae and algae waste were able to deliver 1.20 and 1.62 L of contaminant-free water, respectively. XPS analyses corroborate previous assays that pointed to the prevalence of physisorption with evidence of complexation, ionic exchange, and hydrogen displacement mechanisms.

An evaluation of the efficiency of bacterial biomass augmentation was performed at lab-scale for the pollution treatment of the Derby-Tacaruna canal. The canal is located at the central area of Great Recife, alongside an important urban corridor. The characterization of the canal water in different tidal conditions showed that the actual pollution is organic and inorganic (heavy metals). Degradation experiments of water from the canal and rain-off system polluted by synthetic wastewater were performed, using activated sludge and an industrial bioadditive. Continuous reactors under two different conditions were evaluated: with diffuse aeration and without aeration. The channel reactor was operated under steady state conditions at a flow rate of 2.5 L h−1 and with an average residence time of 22 h without aeration and 17 h with aeration. The organic matter removal was in the range of 60% for the system inoculated with the bioadditive and 85% with activated sludge. It was concluded that the water of the Derby-Tacaruna canal may be treated by activated sludge without being affected by its salt content, while the bioaugmentation technique was not satisfactory due to inhibition by inorganics.

An automated procedure for the characterisation by image analysis of the morphology of activated sludge has been used to monitor the biomass in a pilot wastewater treatment plant, in complement to the usual settleability (sludge volume index, settling velocity) and size distribution (by laser granulometry) measurements.

The storage of poly-beta-hydroxybutyrate (PHB) in extended filamentous bacteria from activated sludge was monitored by Sudan Black staining: PHB granules were blue in the reddish filaments counterstained by safranin. By quantitative image analysis of colour images grabbed on an optical microscope, the distribution of the PHB loading of the extended filaments was estimated by determination of the proportion of blue pixels of their skeleton. The method was applied for different feed compositions to demonstrate its ability to monitor the PHB synthesis and storage capacity of filamentous bacteria in mixed cultures. Fast PHB storage, within a few hours, could be observed with acetate-based feeding solutions but the storage rate decreased with more complex feeds (meat extract based feed, wastewater).