• Energy Research

Dilute acid (DA) pretreatment at pilot level failed for cotton stalk (CS) due to the technical issues posed by its inherent nature. Reasonable glucan conversion has been reported via two-stage pretreatment but adds on to the process cost. Proposed herewith is a single-stage steam explosion (SE) process preceded by water extraction resulting in high sugar recovery from CS. Raising the extraction temperature to 80°C increased the glucan conversion from 37.9 to 52.4%. Further improvement up to 68.4% was achieved when DA was incorporated during the room temperature extraction. LC-MS revealed the formation of xylo-oligomers limiting the glucan conversion in proportion to the length of xylo-oligomers. Varying extraction conditions induced structural alterations in biomass after SE evident by compositional analysis, Infrared Spectroscopy, X-Ray Diffraction and Scanning Electron Microscopy. Overall glucose recovery, i.e. 75.8-76.7% with and without DA extraction respectively was achieved.

Excessive generation of wastewater is a matter of concern around the globe. Wastewater treatment utilizing a microalgae-mediated process is considered an eco-friendly and sustainable method of wastewater treatment. However, low biomass productivity, costly harvesting process, and energy extensive cultivation process are the major bottleneck. The use of the microalgal-bacteria granular consortia (MBGC) process is economic and requires less energy. For efficient utilization of MBGC, knowledge of its structure, composition and interaction are important. Various microscopic, molecular and metabolomics techniques play a significant role in understating consortia structure and interaction between partners. Microalgal-bacteria granular consortia structure is affected by various cultivation parameters like pH, temperature, light intensity, salinity, and the presence of other pollutants in wastewater. In this article, a critical evaluation of recent literature was carried out to develop an understanding related to interaction behavior that can help to engineer consortia having efficient nutrient removal capacity with reduced energy consumption.

Abstract In the context of biofuel production and achieving sustainable bioeconomy, the use of lignocellulosic and algae biomass in anaerobic fermentation processes yields biohythane that has a typical composition of 10–15% H2, 50–55% CH4 and 30–40% CO2. Using organic biomass-based substrates has been shown to minimize environmental impacts due to the versatile production of high-value products under normal operating conditions that are practically achievable. However, the biohythane yield depends on different factors such as the biomass type, the organic loading rate, soluble metabolic products formed, the type of fermentation (single/dual stage) and the pretreatment strategy adopted for the biomass. Different pretreatment strategies based on physical, chemical and biological processes have been proposed in the literature. In this review, improvements in biohythane yield as a result of these pretreatment strategies, the need/effect of inoculum enrichment, the effects of pH, temperature, trace element addition and organic loading rate has been reviewed. Finally, the major developments of improving biohythane yield due to the addition of co-substrates and the current trends are discussed.

Lignocellulosic biomass is projected as a prospective renewable alternative to petroleum for the production of fuel and chemicals. Pretreatment is necessary to disrupt the lignocellulosic structure for extraction of cellulose. Biomass after pretreatment is segregated into cellulose rich solid fraction and black liquor (lignin and hemicelluloses) as a liquid stream. The plant polysaccharide-based industry primarily utilizes the cellulosic fraction as raw material, and carbon rich black liquor discarded as waste or burnt for energy recovery. This review highlights the recent advancements in the biological and chemical valorization of black liquor into fuels and chemicals. The recent research attempted for bioconversion of black liquor into Bioplastic, Biohydrogen, Biogas, and chemicals has been discussed. In addition, the efforts to replace the conventional energy recovery method with the advanced chemical process along with their modifications have been reviewed that will decide the sustainability of the lignocellulosic biomass-based industry.

Abstract Lignocellulosic fractionation is highly desirable for the efficient transformation of polymeric sugars into renewable fuels, chemicals, and materials. Thus, γ-valerolactone (GVL) has attracted attention as an advanced platform chemical, which can be synthesized directly from bioderived products, such as levulinic acid, furfural, and hydroxymethylfurfural, as well as via one-pot catalytic transformation of renewable sugars (cellulose, hemicellulose, and fructose). GVL, when combined with acid and water in a certain ratio, has unique solvent characteristics to deconstruct biomass and solubilize lignin and xylose with reduced toxin generation. GVL is suitable for downstream processing, and thus, it promotes a self-sustainable, closed-loop biorefinery approach. Therefore, in this review, we comprehensively summarized the recent updates and catalytic approaches for GVL production, as well as their applications in biomass deconstruction. Additionally, we introduced the research topic, biomass structure, and natural recalcitrance, and described the merits and demerits of conventional pretreatment methods adopted in the literature so far. Finally, we discussed advancements in GVL-based biorefinery, challenges, and future perspectives.

Growth in population and thereby increased industrialization to meet its requirement, has elevated significantly the demand for energy resources. Depletion of fossil fuel and environmental sustainability issues encouraged the exploration of alternative renewable eco-friendly fuel resources. Among major alternative fuels, bio-ethanol produced from lignocellulosic biomass is the most popular one. Lignocellulosic biomass is the most abundant renewable resource which is ubiquitous on our planet. All the plant biomass is lignocellulosic which is composed of cellulose, hemicellulose and lignin, intricately linked to each other. Filamentous fungi are known to secrete a plethora of biomass hydrolyzing enzymes. Mostly these enzymes are inducible, hence the fungi secrete them economically which causes challenges in their hyperproduction. Biomass’s complicated structure also throws challenges for which pre-treatments of biomass are necessary to make the biomass amorphous to be accessible for the enzymes to act on it. The enzymatic hydrolysis of biomass is the most sustainable way for fermentable sugar generation to convert into ethanol. To have sufficient ethanol concentration in the broth for efficient distillation, high solid loading >20% of biomass is desirable and is the crux of the whole technology. High solid loading offers several benefits including a high concentration of sugars in broth, low equipment sizing, saving cost on infrastructure, etc. Along with the benefits, several challenges also emerged simultaneously, like issues of mass transfer, low reaction rate due to water constrains in, high inhibitor concentration, non-productive binding of enzyme lignin, etc. This article will give an insight into the challenges for cellulase action on cellulosic biomass at a high solid loading of biomass and its probable solutions.

Cellulosic ethanol production has received global attention to use as transportation fuels with gasoline blending virtue of carbon benefits and decarbonization. However, due to changing feedstock composition, natural resistance, and a lack of cost-effective pretreatment and downstream processing, contemporary cellulosic ethanol biorefineries are facing major sustainability issues. As a result, we've outlined the global status of present cellulosic ethanol facilities, as well as main roadblocks and technical challenges for sustainable and commercial cellulosic ethanol production. Additionally, the article highlights the technical and non-technical barriers, various R&D advancements in biomass pretreatment, enzymatic hydrolysis, fermentation strategies that have been deliberated for low-cost sustainable fuel ethanol. Moreover, selection of a low-cost efficient pretreatment method, process simulation, unit integration, state-of-the-art in one pot saccharification and fermentation, system microbiology/ genetic engineering for robust strain development, and comprehensive techno-economic analysis are all major bottlenecks that must be considered for long-term ethanol production in the transportation sector.