• Energy Research

The engineering of broadband absorbers to harvest white light in thin-film semiconductors is a major challenge in developing renewable materials for energy harvesting. Many solution-processed materials with high manufacturability and low cost, such as semiconductor quantum dots, require the use of film structures with thicknesses on the order of 1 μm to absorb incoming photons completely. The electron transport lengths in these media, however, are 1 order of magnitude smaller than this length, hampering further progress with this platform. Herein, we show that, by engineering suitably disordered nanoplasmonic structures, we have created a new class of dispersionless epsilon-near-zero composite materials that efficiently harness white light. Our nanostructures localize light in the dielectric region outside the epsilon-near-zero material with characteristic lengths of 10-100 nm, resulting in an efficient system for harvesting broadband light when a thin absorptive film is deposited on top of the structure. By using a combination of theory and experiments, we demonstrate that ultrathin layers down to 50 nm of colloidal quantum dots deposited atop the epsilon-near-zero material show an increase in broadband absorption ranging from 200% to 500% compared to a planar structure of the same colloidal quantum-dot-absorber average thickness. When the epsilon-near-zero nanostructures were used in an energy-harvesting module, we observed a spectrally averaged 170% broadband increase in the external quantum efficiency of the device, measured at wavelengths between 400 and 1200 nm. Atomic force microscopy and photoluminescence excitation measurements demonstrate that the properties of these epsilon-near-zero structures apply to general metals and could be used to enhance the near-field absorption of semiconductor structures more widely. We have developed an inexpensive electrochemical deposition process that enables scaled-up production of this nanomaterial for large-scale energy-harvesting applications.

The engineering of broadband absorbers to harvest white light in thin-film semiconductors is a major challenge in developing renewable materials for energy harvesting. Many solution-processed materials with high manufacturability and low cost, such as semiconductor quantum dots, require the use of film structures with thicknesses on the order of 1 μm to absorb incoming photons completely. The electron transport lengths in these media, however, are 1 order of magnitude smaller than this length, hampering further progress with this platform. Herein, we show that, by engineering suitably disordered nanoplasmonic structures, we have created a new class of dispersionless epsilon-near-zero composite materials that efficiently harness white light. Our nanostructures localize light in the dielectric region outside the epsilon-near-zero material with characteristic lengths of 10-100 nm, resulting in an efficient system for harvesting broadband light when a thin absorptive film is deposited on top of the structure. By using a combination of theory and experiments, we demonstrate that ultrathin layers down to 50 nm of colloidal quantum dots deposited atop the epsilon-near-zero material show an increase in broadband absorption ranging from 200% to 500% compared to a planar structure of the same colloidal quantum-dot-absorber average thickness. When the epsilon-near-zero nanostructures were used in an energy-harvesting module, we observed a spectrally averaged 170% broadband increase in the external quantum efficiency of the device, measured at wavelengths between 400 and 1200 nm. Atomic force microscopy and photoluminescence excitation measurements demonstrate that the properties of these epsilon-near-zero structures apply to general metals and could be used to enhance the near-field absorption of semiconductor structures more widely. We have developed an inexpensive electrochemical deposition process that enables scaled-up production of this nanomaterial for large-scale energy-harvesting applications.

Solution-processed semiconductors are promising materials to realize optoelectronic devices that combine high performance with inexpensive manufacturing. In particular, the exploitation of colloidal quantum dots (CQDs) capable of harvesting infrared photons, in conjunction with visible-absorbing organic chromophores, has been demonstrated as an interesting route. Unfortunately, CQD/organic hybrid photovoltaics have been limited to power conversion efficiencies (PCEs) below 10% due to chemical mismatch and difficulties in facilitating charge collection. Here we devise a hybrid architecture that overcomes these limitations by introducing small molecules into the CQD/organic stacked structure. The small molecule complements CQD absorption and creates an exciton cascade with the host polymer, thus enabling efficient energy transfer and also promoting exciton dissociation at heterointerfaces. The resulting hybrid solar cells exhibit PCEs of 13.1% and retain over 80% of their initial PCE after 150 h of continuous operation unencapsulated, outperforming present air-processed solution-cast CQD/organic photovoltaics. Colloidal quantum dots and organics have complementary properties apt for photovoltaics, yet their combination has led to poor charge collection. Here, Baek et al. introduce small molecules that act as a bridge between quantum dots and polymers, thus improving device efficiency and stability.

Solution-processed semiconductors are promising materials to realize optoelectronic devices that combine high performance with inexpensive manufacturing. In particular, the exploitation of colloidal quantum dots (CQDs) capable of harvesting infrared photons, in conjunction with visible-absorbing organic chromophores, has been demonstrated as an interesting route. Unfortunately, CQD/organic hybrid photovoltaics have been limited to power conversion efficiencies (PCEs) below 10% due to chemical mismatch and difficulties in facilitating charge collection. Here we devise a hybrid architecture that overcomes these limitations by introducing small molecules into the CQD/organic stacked structure. The small molecule complements CQD absorption and creates an exciton cascade with the host polymer, thus enabling efficient energy transfer and also promoting exciton dissociation at heterointerfaces. The resulting hybrid solar cells exhibit PCEs of 13.1% and retain over 80% of their initial PCE after 150 h of continuous operation unencapsulated, outperforming present air-processed solution-cast CQD/organic photovoltaics. Colloidal quantum dots and organics have complementary properties apt for photovoltaics, yet their combination has led to poor charge collection. Here, Baek et al. introduce small molecules that act as a bridge between quantum dots and polymers, thus improving device efficiency and stability.

AbstractThe electroreduction of C1 feedgas to high-energy-density fuels provides an attractive avenue to the storage of renewable electricity. Much progress has been made to improve selectivity to C1 and C2 products, however, the selectivity to desirable high-energy-density C3 products remains relatively low. We reason that C3 electrosynthesis relies on a higher-order reaction pathway that requires the formation of multiple carbon-carbon (C-C) bonds, and thus pursue a strategy explicitly designed to couple C2 with C1 intermediates. We develop an approach wherein neighboring copper atoms having distinct electronic structures interact with two adsorbates to catalyze an asymmetric reaction. We achieve a record n-propanol Faradaic efficiency (FE) of (33 ± 1)% with a conversion rate of (4.5 ± 0.1) mA cm−2, and a record n-propanol cathodic energy conversion efficiency (EEcathodic half-cell) of 21%. The FE and EEcathodic half-cell represent a 1.3× improvement relative to previously-published CO-to-n-propanol electroreduction reports.

AbstractThe electroreduction of C1 feedgas to high-energy-density fuels provides an attractive avenue to the storage of renewable electricity. Much progress has been made to improve selectivity to C1 and C2 products, however, the selectivity to desirable high-energy-density C3 products remains relatively low. We reason that C3 electrosynthesis relies on a higher-order reaction pathway that requires the formation of multiple carbon-carbon (C-C) bonds, and thus pursue a strategy explicitly designed to couple C2 with C1 intermediates. We develop an approach wherein neighboring copper atoms having distinct electronic structures interact with two adsorbates to catalyze an asymmetric reaction. We achieve a record n-propanol Faradaic efficiency (FE) of (33 ± 1)% with a conversion rate of (4.5 ± 0.1) mA cm−2, and a record n-propanol cathodic energy conversion efficiency (EEcathodic half-cell) of 21%. The FE and EEcathodic half-cell represent a 1.3× improvement relative to previously-published CO-to-n-propanol electroreduction reports.

The carbon dioxide electroreduction reaction (CO2RR) provides ways to produce ethanol but its Faradaic efficiency could be further improved, especially in CO2RR studies reported at a total current density exceeding 10 mA cm−2. Here we report a class of catalysts that achieve an ethanol Faradaic efficiency of (52 ± 1)% and an ethanol cathodic energy efficiency of 31%. We exploit the fact that suppression of the deoxygenation of the intermediate HOCCH* to ethylene promotes ethanol production, and hence that confinement using capping layers having strong electron-donating ability on active catalysts promotes C–C coupling and increases the reaction energy of HOCCH* deoxygenation. Thus, we have developed an electrocatalyst with confined reaction volume by coating Cu catalysts with nitrogen-doped carbon. Spectroscopy suggests that the strong electron-donating ability and confinement of the nitrogen-doped carbon layers leads to the observed pronounced selectivity towards ethanol. The electroreduction of CO2 to ethanol could enable the clean production of fuels using renewable power. This study shows how confinement effects from nitrogen-doped carbon layers on copper catalysts enable selective ethanol production from CO2 with a Faradaic efficiency of up to 52%.

The carbon dioxide electroreduction reaction (CO2RR) provides ways to produce ethanol but its Faradaic efficiency could be further improved, especially in CO2RR studies reported at a total current density exceeding 10 mA cm−2. Here we report a class of catalysts that achieve an ethanol Faradaic efficiency of (52 ± 1)% and an ethanol cathodic energy efficiency of 31%. We exploit the fact that suppression of the deoxygenation of the intermediate HOCCH* to ethylene promotes ethanol production, and hence that confinement using capping layers having strong electron-donating ability on active catalysts promotes C–C coupling and increases the reaction energy of HOCCH* deoxygenation. Thus, we have developed an electrocatalyst with confined reaction volume by coating Cu catalysts with nitrogen-doped carbon. Spectroscopy suggests that the strong electron-donating ability and confinement of the nitrogen-doped carbon layers leads to the observed pronounced selectivity towards ethanol. The electroreduction of CO2 to ethanol could enable the clean production of fuels using renewable power. This study shows how confinement effects from nitrogen-doped carbon layers on copper catalysts enable selective ethanol production from CO2 with a Faradaic efficiency of up to 52%.