• Energy Research

Abstract Date biomass is a carbon-rich renewable resource that can be considered a potential carbon-rich substrate for energy generation over anaerobic digestion (AD). However, due to its complex nature, appropriate pretreatment is necessary to achieve a higher methane yield. Hence, the current study was envisioned to evaluate the influence of three different pretreatment strategies, namely acid, alkali, and hydrothermal pretreatment on biochemical methane potential (BMP) of seven diverse sorts of Algerian date biomass, namely Pedicels, Fibrilium, Petiole, Fruit bunch, Spath, Palm, and its mixture. Among all the pretreatment conditions, alkaline pretreatment highly influenced the lignin composition of date biomass and showed higher BMP. Among all sorts of biomass, higher BMP was detected through Palm as 295.9 mL CH4/g-TS, whereas the lowest BMP values were recorded with Petiole as 226.74 mL CH4/g-TS. Among all the experimental variations, ammonium pretreated Palm biomass documented the highest substrate conversion efficiency (63.80%), which correlates well with the observed higher BMP values. Nevertheless, there was a very marginal improvement in BMP detected in the case of other pretreatment strategies compared to alkaline pretreatment. This might be due to the efficacy of the applied pretreatment method on delignification of date biomass.

The present study is designed to evaluate the potential of deoiled algal biomass (DAB) residue as an alternative resource for the production of bioethanol and biopolymers in a biorefinery approach. Hybrid pretreatment method resulted in higher sugar solubilization (0.590 g/g DAB) than the corresponding individual physicochemical (0.481 g/g DAB) and enzymatic methods (0.484 g/g DAB). Subsequent utilization of sugars from hybrid pretreatment for bioethanol using Saccharomyces cerevisiaeresulted in maximum bioethanol production at pH 5.5 (0.145 ± 0.008 g/g DAB) followed by pH 5.0 (0.122 ± 0.004 g/g DAB) and pH 6.0 (0.102 ± 0.002 g/g DAB). The experiments for biopolymer (PHB: polyhydroxybutyrate) production resulted in 0.43 ± 0.20 g PHB/g DCW. Extracted polymer on NMR and FT-IR analysis showed the presence of PHB. Exploration of DAB as an alternative renewable resource for multiple biobased products supports sustainability and also enables entirety use of DAB by addressing the DAB-residue allied disposal issues.

Date palm waste biomass is a readily accessible agricultural waste biomass that may be used to produce biogas. Because the complex structure of date palm waste biomass prevents the embedded holo-cellulosic sugars from biodegrading, pretreatment is required to increase methane (CH4) yield. The present investigation aimed to comparatively determine the impact of alkali and ionic liquid pretreatment on the biochemical methane potential (BMP) of different types of date palm waste biomass. The findings revealed that ionic liquid pretreated Palm and Fruit bunch showed the highest BMP (321.67 mL CH4/g-TS) and substrate conversion efficiency (68.01%), respectively, over other biomass samples. In alkali pretreatment, the highest BMP and substrate conversion efficiency were detected with Palm (309.76 mL CH4/g-TS) and Spathe (62.09%). The high BMP and substrate conversion efficiency of date palm waste biomass may be harnessed for bioenergy production when this ionic liquid pretreatment technology is used.

The feasibility of pretreatment involving soaking in aqueous ammonia (SAA) for the anaerobic digestion (AD) of eight different types of agricultural biomass of Ugandan origin was investigated. Moderate pretreatment temperatures of 60 and 90 °C were employed, and the NH3 concentration, solid-to-liquid ratio, and pretreatment time were fixed at 15.0% (w/w), 1:6, and 6 h, respectively. The delignification efficiencies of the SAA pretreatment ranged from 51.1 to 76.6%, and the maximum value was observed for maize bran pretreated at 90 °C. Biochemical methane potential experiments proved that the breaking of the complex bonds of lignin made fermentable sugars easily accessible to microorganisms. In all cases, the SAA pretreatment enhanced the methane potential of the eight types of Ugandan biomass compared with its untreated counterparts. The pretreated maize bran exhibited the highest methane yield of 291.5 mL CH4/g COD, which is 83.1% of the theoretical conversion. SAA followed by AD is useful for employing Ugandan agricultural biomass as a renewable energy source.

In this study, a heterogeneous catalyst prepared by pyrolysis of waste cork (Quercus suber) was used for the transesterification of waste cooking oil (WCO). Physicochemical properties of the synthesized biochar catalyst were studied using BET, SEM, FTIR, and XRD. The experiment results demonstrate that heterogeneous catalyst synthesized at 600 °C showed maximum fatty acids methyl esters (FAMEs) conversion (98%) at alcohol:oil (25:1), catalyst loading (1.5% w/v) and temperature 65 °C. Biodiesel produced from WCO (Canola oil) mainly composed of FAMEs in following order C18:1 > C18:2 > C16:0 > C18:0 > C20:0. Properties of produced biodiesel were analysed as cetane number (CN) 50.56, higher heating value (HHV) 39.5, kinematic viscosity (ʋ) 3.9, and density (ρ) 0.87.

Abstract To identify causes affecting the stability of biohydrogen production from the microbial community perspective, a fermentor was operated using galactose as a substrate for 30 days. The fermentor demonstrated that hydrogen production yield gradually increased with concomitant decrease of galactose concentration until day 27. Meanwhile, hydrogen producing clostridia gradually increased their proportion to 75% of bacteria analyzed until day 11, and then gradually decreased to 23% with increases in other groups of bacteria such as Bacilli . After day 27, hydrogen production abruptly failed without deterioration of galactose utilization. At that time, lactic acid accumulated to 920 mg COD/L and Ruminococcaceae increased its proportion to 30%. In conclusion, low substrate levels, beginning on day 11, provided a selective disadvantage to the hydrogen producing clostridia and proliferated other groups of bacteria, which resulted in accumulation of lactic acid and, ultimately, failure of hydrogen production.

In this work, the performance of dual-chamber microbial fuel cells (MFCs) constructed either with commonly used Nafion® proton exchange membrane or supported ionic liquid membranes (SILMs) was assessed. The behavior of MFCs was followed and analyzed by taking the polarization curves and besides, their efficiency was characterized by measuring the electricity generation using various substrates such as acetate and glucose. By using the SILMs containing either [C6mim][PF6] or [Bmim][NTf2] ionic liquids, the energy production of these MFCs from glucose was comparable to that obtained with the MFC employing polymeric Nafion® and the same substrate. Furthermore, the MFC operated with [Bmim][NTf2]-based SILM demonstrated higher energy yield in case of low acetate loading (80.1 J g-1 CODin m-2 h-1) than the one with the polymeric Nafion® N115 (59 J g-1 CODin m-2 h-1). Significant difference was observed between the two SILM-MFCs, however, the characteristics of the system was similar based on the cell polarization measurements. The results suggest that membrane-engineering applying ionic liquids can be an interesting subject field for bioelectrochemical system research.

The effect of cost-effective combined pretreatment on rice straw for lignin solubilization and the recovery of biomethane.