• Energy Research

The catalytic transformation of glycerol to value-added compounds was investigated over bimetallic Ni-Cu/gamma-Al2O3 catalysts with Ni/Cu atomic ratios of 8/1, 4/1, 2/1, 1/1, 1/2, 1/4, and 1/8. XPS analysis revealed that the surface composition of the catalyst exhibited progressive enrichment of Cu as its content in the catalyst increased. H-2-chemisorption indicated that the total number of exposed Ni atoms decreased as the Cu content increased. As a result, deep hydrogenolysis to produce CH4 was inhibited by the addition of Cu to the Ni catalyst, yielding higher selectivity toward the dehydration products of glycerol such as hydroxyacetone.; FTIR spectra of adsorbed CO reveal that Cu asserts both geometric and electronic effects on the adsorption properties of Ni. The geometrical effect is visualized by the progressive disappearance of the bridge bound adsorbed CO on metallic Ni by the incorporation of Cu. This suggests that the deep hydrogenolysis of glycerol to CH4 formation requires an ensemble of adjacent active Ni atoms. The electronic effect of Cu on Ni is indicated by the red shift of the IR peak of adsorbed CO as the Cu content increases. The electronic interaction between Cu and Ni species was also substantiated by XANES results. HTREM revealed metal particles very well distributed on the support with particle size of 1.5 to 5 nm. The Ni Cu samples were not a total intermetallic alloys. (C) 2014 Elsevier B.V. All rights reserved.

Furfural (FF) is a strategic product for the development of highly valued chemicals from biomass. The oxidation product of FF, furoic acid (FA), is an important precursor for the synthesis of green esters, such as methyl furoate. Taking into account issues with the direct furfural oxidation, furfural derivatives, such as alkyl furoates, can be easily prepared via oxidative esterification. Here, Au nanoparticles that were immobilized on alkaline-earth metal oxide supports were studied for the oxidative esterification of furfural while using alcohol as both reactant and solvent. The formation of esters is favored by the presence of basic sites on catalyst surface, resulting in high selectivity, preventing the formation of the acetal as a by-product. The Au/MgO sample provided up to 95% methyl furoate (MF) yield, a fast reaction rate, and high performance for furfural:Au molar ratios between 50 and 300. Furthermore, this catalyst was stable during reuse, since both the selectivity and the activity were maintained after four cycles. Oxidative esterification products were achieved in the presence of other alcohols, leading to the formation of esters of up to C5 (isopentyl furoate) with high selectivity (>99%). Linear and branched esters were formed, but the long-chain linear alcohols resulted in higher yields, such as n-butyl furoate in 94% yield.

A catalyst comprised of SnO2 impregnated on ZnO nanowires, which presented remarkable ability to catalyze fatty acid esterification/transesterification reactions, is reported. For optimization of reaction conditions, artificially acidified soybean oil with 10 wt.% oleic acid was used as a model feed. The optimized conditions were: 150 °C, 6 h, 5 g of oil, catalyst concentration of 5%, and methanol:oil molar ratio of 15:1. The catalyst achieved 92% of total fatty acid methyl esters (FAME) content and was used five times without the necessity of catalyst washing from one reaction to the other. Then, such conditions were applied to produce biodiesel from the oil extracted from Scenedesmus sp. microalgae; the system reached 72% of FAME content, without any previous refining or degumming process of the oil. Rietveld refinement, X-ray diffraction, elemental mapping in scanning transmission electron microscopy, X-ray photoelectron spectroscopy, and pyridine-desorption Fourier-transform infrared spectroscopy were used to characterize the material.

A spectroscopic and microscopic investigation was made of the dynamics of bimetallic nanoparticles (NPs) in Co–Ni/MgAl2O4 catalysts used for the steam reforming of ethanol (SRE) reaction, consideri...