• Energy Research

High-modulus asphalt mixture (HMAM) is one of the most effective materials to enhance the rutting resistance of asphalt pavement and upgrade pavement sustainability. The objectives of this study are to investigate the modulus properties of different HMAMs and their correlation with the rutting resistance, to propose reasonable modulus evaluation indicators, and to analyze the rutting resistance mechanisms of different materials (hard asphalt, polyethylene, dissolved polyolefin). The effect of three HMAMs and two styrene-butadiene-styrene (SBS) modifiers on asphalt mixtures’ rutting resistance were evaluated by dynamic modulus test and wheel track test, and the results were simulated and further analyzed via ABAQUS. The results indicate that the dynamic modulus of the mixtures showed a gradual increase and decrease with the increase of loading frequency and testing temperature, respectively. The ratio of dynamic modulus in low frequency to that in high frequency correlates well with dynamic stability under high-temperature conditions, and the wider the frequency coverage, the higher the correlation between this ratio and dynamic stability. The rutting resistance of asphalt pavements can be improved by reducing the frequency sensitivity of HMAMs under high temperatures or by increasing the modulus’ absolute value of the pavement structural layer. Therefore, two indicators, the absolute value of the modulus and the ratio of 0.1 Hz dynamic modulus to 25 Hz dynamic modulus at 55 °C, are recommended for the evaluation of rutting resistance of HMAMs. Based on the evaluation indexes proposed in this paper, a comparative analysis of the rutting resistance mechanism of HMAMs prepared with different materials was carried out, and it was concluded that the mixture with high-modulus agents had the best rutting resistance, which is consistent with the test road observations, thus verifying the feasibility of the modulus evaluation indexes recommended in this paper for the evaluation of the rutting resistance of different types of HMAMs.

Abstract In the past, most studies considered solar as a drawback to road pavement, especially the asphalt pavement. Not only its radiation causes the asphalt aging, simultaneously with high temperature, asphalt pavement contributes to the urban heat island (UHI) effect. In recent, as the world becomes more supportive towards implementing sustainable energy as the alternatives to the scarcity of non-renewable resources, utilizing the abundant solar radiation as the main source of energy has gradually attracted attention from both industries and academia with its potentials, including solar application on roads. Nevertheless, more researches have focused on the potential energy collection with less consideration to simultaneously overcome the side effects of abundant solar radiation on its lifecycle. This study found the necessity to review a comprehensive correlation between solar radiation and asphalt pavement from both positive and negative effects. The negative effects included asphalt aging and its effects on surroundings i.e. UHI effect. Meanwhile, the positive effects included exhaust purification and solar energy conversion into other forms of energy that can be used by humans using pavement solar heat collection for winter snowmelt, thermoelectric technology and photoelectric technology to convert solar energy into electrical energy. The cases in various application scenarios were analysed and summarized and the existing problems in the current research were proposed in this paper. Also, the reflection on the transformation of road design concept from “avoiding harm” to “seeking profit” was included. Finally, a new concept of “solar-road harmonious symbiosis” for future road application was proposed based on a comprehensive review of previous published works. It is also the new suggestion to scholars on the treatment of solar diseases on roads to prolong its symbiosis functions.

Abstract The adjustment of energy supply for roadway transportation from traditional fossil-dominated energy to sustainable energy is vital for maintaining energy security and constructing a smart and environment-friendly city. Energy harvesting technology as one of the most promising techniques for renewable energy supply was developed in roadway successfully. However, some limitations still exist to be investigated further, including relatively low energy output, poor compatibility with whole structure, long-term durability. We present a comprehensive analysis of this technology to understand the state-of-the-art progress and required future works for energy harvesting technologies in roadway transportation. Two types of energy harvesting technologies for roadway transportation are categorized and reviewed in this paper, namely energy harvesting from the road and from vehicles. The principles, research focus and applications, existing problems, and further suggestions for each energy harvesting technology are elaborated in detail. In addition, the different energy harvesting technologies are compared in terms of energy output, cost, cost-benefit ratio, and technology readiness level to demonstrate the most probable applications. Moreover, future works on energy harvesting technologies are recommended. According to the current energy output, the most probable future applications are PV cell for driving, mechanical energy for sensors, SC system and GEH for special situations. Multiple-technology hybridization and multifunctionality materials, local condition-based and demand-oriented design and overall coordination are three directions should be focused in the future.

The world today is facing an energy crisis, which has promoted the development and utilization of renewable energy, of which solar energy has the greatest potential.