• Energy Research
• 2021-2025close
• Open Access close
• Restricted close
• Open Source close

Decarbonizing the building sector is extremely important to mitigating climate change as the sector contributes 40% of the overall energy consumption and 36% of the total greenhouse gas emissions in the world. Net-zero energy buildings are one of the promising decarbonization attempts due to their potential of decreasing the use of energy and increasing the total share of renewable energy. To achieve a net-zero energy building, it is necessary to decrease the energy demand by applying efficiency enhancement measures and using renewable energy sources. Net-zero energy buildings can be classified into four models (Net-Zero Site Energy buildings, Net-Zero Emissions buildings, Net-Zero Source Energy buildings, and Net-Zero Cost Energy buildings). A variety of technical, financial, and environmental factors should be considered during the decision-making process of net-zero energy building development, justifying the use of multi-criteria decision analysis methods for the design of net-zero energy buildings. This paper also discussed the contributions of renewable energy generation (hydropower, wind energy, solar, heat pumps, and bioenergy) to the development of net-zero energy buildings and reviewed its role in tackling the decarbonization challenge. Cost-benefit analysis and life cycle assessment of building designs were reviewed to shape the priorities of future development. It is important to develop a universal decision instrument for optimum design and operation of net-zero energy buildings.

The energy transition is a global reality. In Brazil, the market is already signaling interest in investing in offshore wind, as can be seen from the environmental licensing processes underway at the Brazilian Institute of Environment and Renewable Natural Resources (Ibama). This article carries out an environmental impact assessment (EIA) for this typology on the Brazilian coast. To this end, the activities of an offshore wind farm were listed for the planning, installation and operation phases of the project. Based on this information, a correlation is made with the environmental impacts identified when carrying out similar activities already carried out by the Brazilian offshore industry (ports, oil and gas exploration and production). Finally, these results are compared with environmental impacts already reported in projects of this type already implemented in the North Sea, United Kingdom. The results of the analysis indicate that, despite the development of significant knowledge about EIA of offshore wind projects, there are still gaps to fill in the consolidation of an effective procedure for assessing the environmental impacts of these projects.

Cette thèse est basée sur des simulations numériques régionales et aborde, d’un point de vue énergétique, la variabilité à Méso (O(10-100)km) et Sous-mésoéchelle (O(0.1-10)km) dans la région du Courant des Aiguilles.(i) La variabilité de sous-mésoéchelle à la transition entre les deux branches du Courant des Aiguilles (28◦E-26◦E) est dominée, en l’absence de méandres de mésoéchelle, par des tourbillons cycloniques frontaux formant un ‘vortex street’. La tension ambiante frontogénétique intensifie le cisaillement frontal qui déclenche l’instabilité barotrope menant à la génération de tourbillons de sous-mésoéchelle.(ii) Un budget modal d’Energie Cinétique des Tourbillons est développé pour caractériser les transferts d’énergie entre les différentes structures verticales. Les interactions canalisées par la topographie (3 processus) résultent globalement en une perte d’énergie pour les tourbillons de mésoéchelle plus grande que les processus de dissipation (friction au fond et vent) et une cascade verticale inverse (interactions triadiques) renforce les tourbillons de mésoéchelle dans les zones au large.(iii) Notre budget modal permet de caractériser la région du Courant des Aiguilles comme une source nette d’énergie pour les tourbillons de mésoéchelle en contradiction avec celui estimé à partir de données d’altimétrie. Cette différence vient des données d’altimétrie ne tenant pas compte de la contribution principale de la dynamique aux sources et puits d’énergie des tourbillons de mésoéchelle (partie linéaire de la dynamique agéostrophique du mode barotrope et du 1er mode barocline). This dissertation is based on regional numerical simulations and addresses, from an energetic perspective, the Meso (O(10-100)km) and Submesoscale (O(0.1- 10)km) variability in the Agulhas Current region.(i) Submesoscale variability at the transition between the two Agulhas Current branches (28◦E-26◦E) is dominated, in the absence of mesoscale meanders, by cyclonic frontal eddies forming a ’vortex street’. The frontogenetic background strain intensifies the frontal shear which triggers the barotropic instability leading to submesoscale eddies generation.(ii) A modal Eddy Kinetic Energy budget is derived to characterize the energy transfers between the different vertical structures. Interactions canalized by topography (3 processes) globally result in a larger energy loss for mesoscale eddies than dissipation processes (bottom friction and wind) and an inverse vertical cascade (triadic interactions) reinforces mesoscale eddies in offshore areas.(iii) Our modal budget allows to characterize the Agulhas Current region as a net energy source for mesoscale eddies in contradiction with one inferred from altimetry data. The discrepancies come from altimetry data not accounting for the main contribution of the dynamics to mesoscale eddies energy sources and sinks (ageostrophic linear part of the dynamics of the barotropic and 1st baroclinic modes).

Pool boiling in porous media has been applied in various thermal management systems by using latent heat and increasing the heat transfer area and thermal conduction path to improve the heat transfer performance. In mechanical equipment, vibration is an inevitable problem due to reasons such as engine operation and high-speed relative motion between transmission system components, which causes the system components to be affected by vibration forces or vibration accelerations. This study focuses on a review of published articles about the effects of mechanical vibration on the characteristics of boiling process in porous media by two aspects: heat transfer performance and bubble dynamics. Heat transfer coefficient (HTC) and critical heat flux are two main parameters used to measure the boiling heat transfer characteristics of porous media. For bubble dynamics investigations, properties such as migration, fragment, coalescence, departure diameter and frequency are the focus of research attention. Different mechanical vibration parameters, i.e., direction, frequency, and amplitude, will have different effects on the above characteristics. It is worth mentioning that the greatest influence occurs under resonance conditions, and this has been verified through experimental and simulation calculations. This review highlights the importance of considering mechanical vibrations in the design and optimization of porous media systems for efficient heat transfer applications. Further research is warranted to explore the detailed mechanisms and optimize the vibration parameters for enhanced heat transfer performance in thermal management systems using porous media.

For LCC-HVDC system with renewable energy integration, the randomness and variability of renewable energy will cause wide variations in the short-circuit capacity provided by the AC system. To effectively assess the supporting capability of the AC system, this paper proposes an active short-circuit capacity identification method for LCC-HVDC system considering the integration of renewable energy. First, an equivalent AC system was established based on Thevenin theorem, and the equivalent electromotive force was calculated. Then, the sensitivity of the voltage at the point of common coupling (PCC) to the active and reactive power flowing through the PCC was computed. Through sensitivity analysis, the key factors affecting the identification of the equivalent resistance and reactance were studied. Based on this, an active short-circuit capacity identification method combining the switching of filters and changes in DC power was proposed. Finally, a simulation model of LCC-HVDC system with grid-following wind power integration was built in PSCAD/EMTDC for verification. The results show that the proposed method is applicable to AC systems with different impedance characteristics. Moreover, with the increase of the grid-following renewable energy, the short-circuit capacity provided by the AC system shows a decreasing trend. The proposed method can actively identify the short-circuit capacity of AC system with renewable energy, thus provides a theoretical basis for the development of control strategies for LCC converter station under different AC system strength.

Localisation of humanitarian aid has emerged as a major issue after the World Humanitarian Summit in 2016 which emphasised the importance of locally-led response as a corrective to power imbalances in the humanitarian system. However, the practical complexities of localised humanitarian aid are yet to be fully discussed. This paper aims to examine the concept of localisation in humanitarian aid through a case study of a local non-governmental organisation, the Cambodian Children's Trust (CCT), in Cambodia. Drawing on the framework of localisation proposed by Baguios et al., (2021), we analyse the application of localisation of child protection programs run by CCT. We provide a holistic understanding of how localisation is conducted in practice, and the impacts it has on the wider humanitarian sector. Our study illustrates that power can be effectively developed to local entities and localisation with empowerment could be achieved despite highly challenging conditions.

This study introduces novel phenothiazine-based organic dyes, 2-LBH-100, 2-LBH-44, and 2-Ryu-4, specifically designed for quasi-solid-state dye-sensitized solar cells (QsDSSCs). Employing a donor-π-acceptor architecture, these dyes incorporate varying electron-donating moieties, including bis(3-(hexyloxy)phenyl)amine and diphenylamino, coupled with a cyanoacrylic acid acceptor. Alkoxy substitutions in 2-LBH-100 and 2-LBH-44 enhanced solubility and dye loading on TiO2, leading to improved performance in QsDSSCs. 2-LBH-100 exhibited a power conversion efficiency (PCE) exceeding 5% with excellent stability, while 2-LBH-44 demonstrated a PCE of over 3%, increasing to 4% over time. 2-Ryu-4, with its diphenylamino donor, achieved an initial PCE of over 6%. This research highlights the crucial role of donor–acceptor interactions in optimizing organic dye design for high-performance QsDSSCs, paving the way for efficient and stable next-generation solar energy technologies.

Improving efficiency, reducing expenses, and ensuring sustainability in today’s competitive market is made possible by optimising the performance of the food supply chain (FSC). A strong decision-making framework is required to overcome obstacles including high transportation and production costs, uneven quality, and the impact on the environment. To solve these problems, this paper presents an all-inclusive multi-criteria decision making (MCDM) framework that uses enhanced relative utility and nonlinear standardisation (ERUNS) to rank alternatives, Logarithmic percentage change-driven objective weighing (LOPCOW) to determine objective weights, and subjective weight assignment by ratio analysis (SWARA) to determine subjective criterion weights. LOPCOW offers objective weights grounded in facts and indifference thresholds, whereas SWARA records decision-makers (DMs) preferences in weighing factors like sustainability and cost efficiency. The ERUNS methodology then uses utility degree assessments and matrix standardization to rank and evaluate alternatives. An improved method of assessment is to make use of intuitionistic fuzzy sets (IFS), which deal with ambiguity by adding membership, non-membership, and hesitation levels. By merging subjective and objective data, this integrated method maximizes FSC performance, provides useful insights for enhancing overall efficiency and sustainability, and offers a viable answer to contemporary difficulties. It also offers helpful insights for improving overall efficiency and sustainability, and it provides a practical response to the challenges that are now being faced.

To mitigate the temperature increase in urban environments and reduce its impact on energy consumption and the quality of the environment, urban retrofitting technologies have been developed and applied worldwide. High albedo in urban surfaces and additional vegetation are the most efficient strategies to accomplish these goals. The objective of this study is to estimate the weight of these strategies, both individually and integrated, on the cooling potential of two Latin American cities. To do this, 36 low and high urban density scenarios were simulated with the ENVI-Met software. The simulation models were calibrated using air temperature curves which were monitored during the summer periods from 2010 to 2013. A Principal Components Analysis was carried out to establish possible associations between the proposed mitigation strategies and then the weight of anthropogenic heat was evaluated according to the configuration. The results show that the integrated mitigation strategies in urban areas -i. e. increase vegetation and albedo on horizontal surfaces- has a great potential to mitigate urban warming, showing a more significant impact on low-density urban configuration. The contribution of anthropogenic heat mainly produced by motorized transport and air conditioning systems, is a crucial input data for the urban microclimate simulations. Its impact on the urban densification processes may cancel out the benefits derived by the application of the mitigation strategies considered.