• Energy Research
• Chinese Academy of Sciences close

In this paper, metabolic evaluation has been employed for better understanding the trends in urban environmental changes. Due to the urban activities cause impacts not only on local level but also a broader scale, Hybrid Emergy-LCA (HEML), a combining approach of Emergy Analysis (EMA) and Life Cycle Assessment (LCA) is structured to quantitatively investigate the mechanism. For the similarity across many emerging cities in China, a large-scale sub-urban residential area named Tian Tongyuan (Try) in Beijing was chosen for testing the HEML. Objective indicators of live quality and negative impacts are both considered. Analysis indicates that the household Emergy input of TTY is 1.76E+16 sej/yr, while the prominent environmental impact is induced by Photochemical Oxidant Creation Potentials (POCP), 4.58E+05 g ethane eq./yr. The sustainable performance constructed by its live quality and environmental impacts of TTY is found as 98.80% as that of Beijing average. Mitigation polices on the building sector should be proposed because of its dominating impacts among various consuming ends of energy and materials. (C) 2009 Elsevier B.V. All rights reserved.

AbstractMicrobial carbon (C) use efficiency (CUE) delineates the proportion of organic C used by microorganisms for anabolism and ultimately influences the amount of C sequestered in soils. However, the key factors controlling CUE remain enigmatic, leading to considerable uncertainty in understanding soil C retention and predicting its responses to global change factors. Here, we investigate the global patterns of CUE estimate by stoichiometric modeling in surface soils of natural ecosystems, and examine its associations with temperature, precipitation, plant‐derived C and soil nutrient availability. We found that CUE is determined by the most limiting resource among these four basic environmental resources within specific climate zones (i.e., tropical, temperate, arid, and cold zones). Higher CUE is common in arid and cold zones and corresponds to limitations in temperature, water, and plant‐derived C input, while lower CUE is observed in tropical and temperate zones with widespread limitation of nutrients (e.g., nitrogen or phosphorus) in soil. The contrasting resource limitations among climate zones led to an apparent increase in CUE with increasing latitude. The resource‐specific dependence of CUE implies that soils in high latitudes with arid and cold environments may retain less organic C in the future, as warming and increased precipitation can reduce CUE. In contrast, oligotrophic soils in low latitudes may increase organic C retention, as CUE could be increased with concurrent anthropogenic nutrient inputs. The findings underscore the importance of resource limitations for CUE and suggest asymmetric responses of organic C retention in soils across latitudes to global change factors.

Microbe-assisted phytoremediation is emerging as one of the most effective means by which plants and their associated rhizosphere microbes degrade organic contaminants in soils. A pot study was conducted to examine the effects of inoculation with Rhizobium meliloti on phytoremediation by alfalfa grown for 90 days in an agricultural soil contaminated with weathered polycyclic aromatic hydrocarbons (PAHs). Planting with uninoculated alfalfa (P) and alfalfa inoculated with R. meliloti (PR) significantly lowered the initial soil PAH concentrations by 37.2 and 51.4% respectively compared with unplanted control soil. Inoculation with R. meliloti significantly increased the counts of culturable PAH-degrading bacteria, soil microbial activity and the carbon utilization ability of the soil microbial community. The results suggest that the symbiotic association between alfalfa and Rhizobium can stimulate the rhizosphere microflora to degrade PAHs and its application may be a promising bioremediation strategy for aged PAH-contaminated soils.

Abstract The rapid economic development of China has been accompanied by the emission of a great number of pollutants, which in turn have caused severe environmental problems. To strengthen environmental management and to establish a pollution source information database covering all key pollution sources and activities, China carried out its first National Census of Pollution Sources (NCPS) in 2007. The survey contents include the basic environmental situation in 2007, the generation levels of the main pollutants at that time, and the amount of pollution actually discharged into the environment after end-of-pipe treatment at all kinds of pollution sources. Based on the first NCPS report for China released in 2011, and taking two typical industry pollutants, sulfur dioxide (SO 2 ), and chemical oxygen demand (COD) as examples, we first revised the historical data concerning environmental statistics based on the NCPS documents. Subsequently, we analyzed the overall industrial scale in the change of SO 2 and COD emissions using index decomposition analysis, and then studied the contributions and comparative significance of the “three pollution emission reduction measures” put forward by the Chinese government. The latter are: Engineering Emission Reduction (EER), Structure Emission Reduction (SrER) and Supervision Emission Reduction (SuER). From these analyses, we were able to identify the main driving forces for SO 2 and COD emission reduction in China's industrial system. The results indicate that, with continually increasing pollution pressure caused by rapid economic development, EER and SuER have made the greatest contributions to reducing SO 2 and COD emissions; but SrER has not had an obvious effect. In the future, EER and SuER will gradually have less and less potential and become more challenging, while SrER should be achievable through adjusting the economic structure.

AbstractThe change in the phenology of plants or animals reflects the response of living systems to climate change. Numerous studies have reported a consistent earlier spring phenophases in many parts of middle and high latitudes reflecting increasing temperatures with the exception of China. A systematic analysis of Chinese phenological response could complement the assessment of climate change impact for the whole Northern Hemisphere. Here, we analyze 1263 phenological time series (1960–2011, with 20+ years data) of 112 species extracted from 48 studies across 145 sites in China. Taxonomic groups include trees, shrubs, herbs, birds, amphibians and insects. Results demonstrate that 90.8% of the spring/summer phenophases time series show earlier trends and 69.0% of the autumn phenophases records show later trends. For spring/summer phenophases, the mean advance across all the taxonomic groups was 2.75 days decade−1 ranging between 2.11 and 6.11 days decade−1 for insects and amphibians, respectively. Herbs and amphibians show significantly stronger advancement than trees, shrubs and insect. The response of phenophases of different taxonomic groups in autumn is more complex: trees, shrubs, herbs and insects show a delay between 1.93 and 4.84 days decade−1, while other groups reveal an advancement ranging from 1.10 to 2.11 days decade−1. For woody plants (including trees and shrubs), the stronger shifts toward earlier spring/summer were detected from the data series starting from more recent decades (1980s–2000s). The geographic factors (latitude, longitude and altitude) could only explain 9% and 3% of the overall variance in spring/summer and autumn phenological trends, respectively. The rate of change in spring/summer phenophase of woody plants (1960s–2000s) generally matches measured local warming across 49 sites in China (R = −0.33, P < 0.05).

Carbon capture, utilization, and storage (CCUS) is a gas injection technology that enables the storage of CO2 underground. The aims are twofold, on one hand to reduce the emissions of CO2 into the atmosphere and on the other hand to increase oil/gas/heat recovery. Different types of CCUS technologies and related engineering projects have a long history of research and operation in the USA. However, in China they have a short development period ca. 10 years. Unlike CO2 capture and CO2-EOR technologies that are already operating on a commercial scale in China, research into other CCUS technologies is still in its infancy or at the pilot-scale. This paper first reviews the status and development of the different types of CCUS technologies and related engineering projects worldwide. Then it focuses on their developments in China in the last decade. The main research projects, international cooperation, and pilot-scale engineering projects in China are summarized and compared. Finally, the paper examines the challenges and prospects to be experienced through the industrialization of CCUS engineering projects in China. It can be concluded that the CCUS technologies have still large potential in China. It can only be unlocked by overcoming the technical and social challenges.

The tip clearance flow could lead to work reduction and loss generation in turbomachines. However, the effect of separation at low Reynolds number on leakage flow is seldom studied. The previous method for evaluating tip leakage characteristics should also be further researched. Thus, numerical investigations on the tip clearance flow in an unshrouded axial-inflow turbine are conducted at low Reynolds number (3.5 × 104 of the rotor outlet at the designed condition) in the present study. The flow patterns and leakage mass flow rate of the clearance have been analyzed in detail. It is found that the tip clearance flow is greatly affected by the flow separation caused by low Reynolds number. The scraping ratio adopted in previous references does not accord with the clearance flow characteristics at low Reynolds number, especially in the front part of the clearance. A coefficient by −0.70 power of the Reynolds number is proposed to modify the scraping ratio in the present study. The synergy between the velocity and the pressure gradient is innovatively employed to research the tip clearance flow characteristics, and it gives a reliable criterion of indicating the flow patterns in the tip clearance.