• Energy Research
• Closed Access close
• Embargo close

This article is categorized under: Energy Research & Innovation > Science and Materials Energy Research & Innovation > Economics and Policy Energy Research & Innovation > Systems and Infrastructure Energy Research & Innovation > Climate and Environment

A co-culture of Clostridium beijerinckii and Geobacter metallireducens with AH2QDS produced hydrogen from lignocellulosic hydrolysates (biomass of Miscanthus prepared by hydrothermal treatment with dilute acids). This co-culture system enhanced hydrogen production from lignocellulosic hydrolysates by improving substrate utilization and diminishing acetate accumulation, despite the presence of fermentation inhibitors in the hydrolysates. The improvements were greater for xylose-rich hydrolysates. The increase in maximum cumulative hydrogen production for hydrolysates with glucose:xylose mass ratios of 1:0.2, 1:1 and 1:10 g/g was 0%, 22% and 11%, respectively. Alternative extracellular electron shuttles (EES), including indigo dye, juglone, lawsone, fulvic acids and humic acids, were able to substitute for AH2QDS, improving hydrogen production in the co-culture system using xylose as model substrate. Increased utilization of xylose-rich hydrolysates and substitution of alternative EES make the co-culture with EES system a more attractive strategy for industrial biohydrogen production.

AbstractPropolis acts primarily as a biocide against invasive bacteria and fungi in the hive, suggesting its potential for industrial applications. In food application, propolis is considered as a chemical preservative in meat products, extending shelf life of frozen meat and other food. The mechanism of action is still unclear due to the synergy of multiple compounds contained in propolis and due to parallel targeting of multiple pathways within each affected organism. Here, we examined the antimicrobial properties of dimethylsulfoxide (DMSO) Czech propolis extract. Until recently, DMSO was only rarely used in the propolis studies, although the other solvents tested (mostly ethanol) may significantly affect the observed inhibitory effects, notwithstanding the antimicrobial effects of ethanol itself. Here, we provide results of zone inhibition tests against Aspergillus fumigatus, Microsporum gypseum, Microsporum canis, Candida albicans, Escherichia coli, Staphylococcus aureus, Listeria monocytogenes, and Enterococcus faecalis. Although we determined inhibitory effects against all the microorganisms tested, the dose‐dependent response curves were not similar to each other. While inhibitory effects against C. albicans or S. aureus were strictly dose‐dependent, responses of M. gypseum and E. faecalis displayed plateau across the broad range of concentrations tested. Interestingly, response of E. coli revealed the double‐peak dose‐dependent curve, and responses of M. canis and L. monocytogenes decreased at the highest concentrations tested. Suggested is evaluation of DMSO propolis extracts in experimental treatment of human and veterinary infections, preferably in multitherapy with antibiotics.

Industrial producers face the task of optimizing production process in an attempt to achieve the desired quality such as mechanical properties with the lowest energy consumption. In industrial carbon fiber production, the fibers are processed in bundles containing (batches) several thousand filaments and consequently the energy optimization will be a stochastic process as it involves uncertainty, imprecision or randomness. This paper presents a stochastic optimization model to reduce energy consumption a given range of desired mechanical properties. Several processing condition sets are developed and for each set of conditions, 50 samples of fiber are analyzed for their tensile strength and modulus. The energy consumption during production of the samples is carefully monitored on the processing equipment. Then, five standard distribution functions are examined to determine those which can best describe the distribution of mechanical properties of filaments. To verify the distribution goodness of fit and correlation statistics, the Kolmogorov-Smirnov test is used. In order to estimate the selected distribution (Weibull) parameters, the maximum likelihood, least square and genetic algorithm methods are compared. An array of factors including the sample size, the confidence level, and relative error of estimated parameters are used for evaluating the tensile strength and modulus properties. The energy consumption and N2 gas cost are modeled by Convex Hull method. Finally, in order to optimize the carbon fiber production quality and its energy consumption and total cost, mixed integer linear programming is utilized. The results show that using the stochastic optimization models, we are able to predict the production quality in a given range and minimize the energy consumption of its industrial process.

Abstract This paper summarises studies undertaken towards the development of a laminated composite aluminium/hexadecane phase change material (PCM) drywall based on previous analytical work. The study also covered the selection and testing of various types of adhesive materials and identified Polyvinyl acetate (PVA) material as a suitable bonding material. For the purpose of comparison pure hexadecane and composite aluminium/hexadecane samples were developed and tested. The test results revealed faster thermal response by the aluminium/hexadecane sample regarding the rate of heat flux and also achieved about 10% and 15% heat transfer enhancements during the charging and discharging periods respectively. Its measured effective thermal conductivity also increased remarkably to 1.25 W/mK as compared with 0.15 W/mK for pure hexadecane. However there was about 5% less total cumulative thermal energy discharged at the end of the test which indicates that its effective thermal capacity was reduced by the presence of the aluminium particles. The study has shown that some of the scientific and technical barriers associated with the development of laminated composite PCM drywall systems can be overcome but further investigations of effects of adhesive materials are needed.

Abstract Egg yolk-derived P and N dual doped nano carbon capsules (PNCCs) have been synthesized and used as lithium ion battery anodes. The application of egg yolk as the carbon source is a new and environmental-friendly approach for biomass recycling. The reversible capacity of half cells made of PNCCs is as high as ~770 mA h g−1 at a current density of 0.5 A g−1 with considerable rate capacity and cycling stability. PNCCs show a capsule-like structure, which provide extra edges and active sites for lithium intercalation. The heteroatom doping also introduce defects and disorder, which increases the electrochemical activity and creates more active sites for lithium insertion.