• Energy Research
• Closed Access close
• Restricted close
• Open Source close
• Applied Energy close

Abstract Algae have been considered as a promising biodiesel feedstock. One of the major factors affecting large-scale algae technology application is poor wintering cultivation performance. In this study, an integrated approach is investigated combining freshwater microalgae Chlorella zofingiensis wintering cultivation in pilot-scale photobioreactors with artificial wastewater treatment. Mixotrophic culture with the addition of acetic acid (pH-regulation group) and autotrophic culture (control group) were designed, and the characteristics of algal growth, lipid and biodiesel production, and nitrogen and phosphate removal were examined. The results showed that, by using acetic acid three times per day to regulate pH at between 6.8 and 7.2, the total nitrogen (TN) and total phosphate (TP) removal could be increased from 45.2% to 73.5% and from 92.2% to 100%, respectively. Higher biomass productivity of 66.94 mg L−1 day−1 with specific growth rate of 0.260 day−1 was achieved in the pH-regulation group. The lipid content was much higher when using acetic acid to regulate pH, and the relative lipid productivity reached 37.48 mg L−1 day−1. The biodiesel yield in the pH-regulated group was 19.44% of dry weight, with 16–18 carbons as the most abundant composition for fatty acid methyl esters. The findings of the study prove that pH adjustment using acetic acid is efficient in cultivating C. zofingiensis in wastewater in winter for biodiesel production and nutrient reduction.

Abstract Bioproducts from biomass feedstocks and organic wastes have shown great potential to address challenges across food-energy-water systems. However, bioproducts production is at an early, nascent stage that requires new inventions and cost-reducing approaches to meet market needs. Biochar, a byproduct of the pyrolysis process, derived from nutrient-rich biomass feedstocks (e.g., cattle manure and poultry litter) is one of these bioproducts that has numerous applications, such as improving soil fertility and crop productivity. This study investigates the market opportunity and sustainability benefits of converting manure to biochar on-site, using a portable refinery unit. Techno-economic and environmental impact assessments are conducted on a real case study in Twin Falls, Idaho, USA. The techno-economic analysis includes a stochastic optimization model to calculate the total cost of biochar production and distribution. The environmental study employs a life cycle assessment method to evaluate the global warming potential of manure-to-biochar production and distribution network. The total cost of biochar production from cattle manure near the feedlots is approximately $237 per metric ton, and total emission is 951 kg CO2 eq. per metric ton. The on-site operation and manure moisture content are two key parameters that can reduce biochar unit price and carbon footprint of manure management. It is concluded that converting cattle manure, using the presented strategy and process near the collection sites can address upstream and midstream sustainability challenges and stimulate the biochar industry.

Abstract Oil-related events have increased the uncertainty and complexity of the worldwide oil market. This paper investigates the effects of four types of oil-related events on world oil prices, using an event study methodology and an AR-GARCH model. The Internet information concerning these events, which is derived from search query volumes in Google, is introduced in an analytical framework to identify the magnitude and significance of the market response to oil-related events. The results indicate that world oil prices responding to different oil-related events display obvious differentiation. The cumulative abnormal returns, which reflect the influence of the global financial crisis, tend to drop first and then reverse and rise, while the cumulative abnormal returns induced by other oil-related events present a stronger persistent effect. The impact of the global financial crisis on oil price returns is significantly negative, while the impact of the Libyan war and hurricanes is significantly positive. However, the reactions of oil price returns to different OPEC production announcements are inconsistent.

Effectively analyzing and then treating energy-related air pollution requires examining every factor, from the pollution source to the end of treatment. This paper applies index decomposition analysis and a whole process treatment perspective to identify the factors facilitating air pollution reduction across three stages: source prevention, process control, and end-of-pipe treatment. Empirical research using data from China’s Jiangsu Province and its 13 cities reveals differences in local approaches to pollution prevention. At the provincial level, end-of-pipe treatment remains the primary approach to control air pollution emissions, indicating that the pattern of “pollute first, govern later” has not yet been fundamentally reversed. At the city level, 13 cities can be divided into four types, based on their approach to air pollution treatment: the leading type, process-dependent type, end-dependent type, and lagging type. Of these, 7 cities are using multiple control approaches, reflecting the comprehensive effect of whole process treatment. The Jiangsu Province should consider further strengthening effective whole process air pollution treatment models, by transitioning to pollution control, adjusting industrial structure, promoting technological progress, and consuming clean energy.

In recent years, the portable technology is receiving a great interest and significant improvement due to the progresses in electronic technology development and energy storage solutions. The decrease in power requirements for working energy systems, due to the increased efficiency and to the reduction in components size, opens the access to new solutions for power supplying. In particular, alternative backup systems for battery charging or replacement could be designed taking advantage of unconventional technologies. It is the case of small photovoltaic portable panels or fuel cells technology: in these solutions different sources are used to produce limited electrical powers required to keep devices on. In this paper, a thermoelectric solution for the power generation has been considered: the generator has been designed and assembled starting from a catalytic combustor. Catalytic combustion allows safe control of the processes, and the choice of a hydrocarbon fuel ensures the power availability and a fast recharge. The size of the system is set to fit a volume close to the one of AA batteries. The electrical power output obtained is close to 1 W with a cold side temperature below 40 °C. The limited values of these physical parameters allow obtaining a portable and safe device. The generator has been fully characterized in different ranges of fuel flow rates and the performances have been thoroughly analysed for processes optimization and efficiency improvement.

Nowadays, the electric power system and natural gas network are becoming increasingly coupled and interdependent. A harmonized integration of natural gas and electricity network with bi-directional energy conversion is expected to accommodate high penetration levels of renewables in terms of system flexibility. This work focuses on the steady-state analysis of the integrated natural gas and electric power system with bi-directional energy conversion. A unified energy flow formulation is developed to describe the nodal balance and branch flow in both systems and it is solved with the Newton–Raphson method. Both the unification of units and the per-unit system are proposed to simplify the system description and to enhance the computation efficiency. The applicability of the proposed method is demonstrated by analyzing an IEEE-9 test system integrated with a 7-node natural gas network. Later, time series of wind power and power load are used to investigate the mitigation effect of the integrated energy system. At last, the effect of wind power and power demand on the output of Power to Gas (P2G) and gas-fired power generation (GPG) has also been investigated.

This study presents an investigation on the influence of hydrothermally treated municipal solid waste (MSW) on the co-combustion characteristics with different rank coals, i.e. Indian, Indonesian and Australian coals. MSW blends of 10%, 20%, 30% and 50% (wt.%) with different rank coals were tested in a thermogravimetric analyser (TGA) in the temperature range from ambient to 700 °C under the heating rate of 10 °C/min. Combustion characteristics such as volatile release, ignition and burnout were studied for the blend fuel. Different ignition behavior was observed depending on the blends composition and the coal rank. The result of this work indicates that the blending of MSW improves devolatization properties of coal. But it was found that the co-combustion characteristics of MSW and coal blend cannot be predicted only from the pyrolytic and or devolatization phenomena as the other factors such as the coal quality also plays a vital role in deciding the blends co-combustion characteristics. The TGA combustion profiles showed that the combustion characteristics of blends followed those of parent fuels in both an additive and non-additive manners. These experimental results help to understand and predict the behavior of coal and MSW blends in practical applications.